Fisher Paykel EB24DSXB1 User Manual

AUTOMATIC BEAN TO CUP

COFFEE MACHINE

EB24 model

USER GUIDE

US CA

CONTENTS

Appliance parts 2

Safety and warnings 4

First use 7

Menu settings 11

Making coffee 15

Making cappuccinos and milk-based coffees 19

Delivering hot water 22

Steam delivery 23

Customizing beverages

Memorizing your personal profile 25

Cleaning 26

Descale 32

Water softener filter 35

Displayed messages 37

Troubleshooting 42

Warranty and service 44

IMPORTANT!

SAVE THESE INSTRUCTIONS

The models shown in this user guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please go to our website fisherpaykel.com or contact your local Fisher & Paykel dealer.

Registration

To register your product visit our website: fisherpaykel.com

APPLIANCE PARTS

Beans container lid

Beans container

Ground coffee funnel

Interior lighting

Grinding adjustment dial

Coffee guide

Service door

Control panel

On/Off/

stand-by button

Infuser

Coffee grounds container

Spouts

Cup

Hot water/steam

light

connection nozzle

Cup tray

Drip tray

APPLIANCE PARTS

Power cord

Power plug

Main switch

Tray for objects

‘Total Hardness

Test’ indicator

paper

Water tank

Ground coffee

measure

Measure

compartment

ACCESSORIES

Milk container

Lid with milk frother

Descaler

Cleaning brush

Water softener filter (some models only)

Steam wand

Connection

nozzle cover

Frothed milk spout

(adjustable)

Milk intake tube

Milk container

Thermal casing

Froth adjustment and clean dial

Lid release buttons

SAFETY AND WARNINGS

IMPORTANT SAFETY INSTRUCTIONS

Your safety is important to us. Keep the following instructions in mind when you are using your coffee maker.

Read all instructions before installation or use of the coffee system.

Please read these instructions carefully to prevent accidents and machine damage.

This appliance is for household use only, to prepare espresso, cappuccino and coffee. Do not use the appliance other than for its intended use. Any other use could be dangerous. The manufacturer cannot be held responsible for damage caused by improper use of the appliance.

WARNING!

Cut Hazard Take care – some edges are sharp. Failure to use caution could result in injury or cuts.

WARNING!

●

The coffee system must be maintained daily to prevent the growth of harmful bacteria and mold. Please read the Cleaning section of the booklet.

●

Important! Do not look directly or with an optical instrument into the lighting.

●

Danger of burns! Risk of burns when dispensing hot beverages, they are extremely hot.

●

Persons which lack physical, sensory or mental abilities or experience with the machine should not use it without supervision or instruction by a responsible person.

●

Close supervision is necessary when any appliance is used by or near children.

●

Do not touch hot surfaces. Use handles or knobs.

●

To avoid injuries allow the coffee system to cool before cleaning or putting on and taking off parts. Turn the machine off at the main switch when not in use and before cleaning.

●

Only fill the water tank with cold, fresh tap water. Warm or hot water, or any other liquids may damage the machine.

●

The water should be changed daily to prevent bacteria or mold growth.

●

Do not use mineral water. Mineral water leads to heavy calcium buildup in the machine that can damage the unit.

●

Do not fill anything but coffee beans into the beans container. Do not fill ground coffee in the beans container, it will damage the grinding unit.

●

Sugar can damage the appliance! Caramelized or otherwise pre-treated coffee beans or other sugar containing beverages must not be put in the machine.

●

Never place a cup with an alcohol-coffee mixture underneath the coffee dispenser. Plastic parts of the unit could catch fire!

●

The hot water and steam dispensed could cause scalding. These functions must be used carefully. Never hold any parts of the body under the steam nozzle or the hot water dispenser. The machine must never be used to clean objects.

●

Never use a steam cleaner to clean the appliance. Pressurized steam could damage electrical components and cause a short circuit.

●

The appliances must be descaled regularly with the supplied descaling tablets. In areas with very hard water the machine may need to be descaled more often. The manufacturer cannot be held responsible for damages resulting from insufficient

SAFETY AND WARNINGS

descaling.

●

Only use the descaling tablets. Take care to use the correct mixture of water and descaler, otherwise it may cause damage.

●

Never make coffee, hot water or steam when the appliance is extracted. Always make sure the appliance is inactive before extracting it. Failure to observe this precaution could lead to damage to the appliance! The only exception is adjusting the coffee mill which must be done with the machine out (see the section “Adjusting the coffee mill”).

●

Do not place on or near a hot gas or electric burner, or in a heated oven.

●

Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment.

●

Do not use appliance for other than intended use.

●

To reduce the risk of fire, do not mount unit over or near any portion of a heating or cooking appliance.

●

To reduce the risk of electric shock, do not mount over a sink.

SAVE THESE INSTRUCTIONS

FIRST USE

Checking the appliance

After removing the packaging, make sure the product is complete. If the appliance is damaged, contact customer support.

Note: that coffee has been used to factory test the appliance, so it is possible that there may be traces of coffee in the mill.

●

You should Customize water hardness as soon as possible following the instructions in section ‘Setting water hardness’.

Connect the appliance to the mains

electricity supply.

Display

Appliance

settings menu

My menu to

customize the

beverages settings

Customisable

profiles

Scroll arrow

PROFILE 1 SIZE

ESPRESSO

Selected strength

00:00

COFFEE

Beverage selection

Make sure the main switch on the side

of the appliance is pressed down. To select language press or

until the flag corresponding to the required language appears on the display, then press the flag.

Clock

CAPPUCCINO

Selected

size

Strength selection

STRENGTH

LATTE

MACCHIATO

selection

Size

Scroll arrow

FIRST USE

Follow the instructions indicated on the appliance display:

FILL TANK WITH

FRESH WATER: remove the water tank.

Close the lid and put

the tank back in the appliance.

Open the lid.

INSERT WATER SPOUT:

Check that the steam wand is inserted on the connection nozzle.

Fill with fresh water to the

MAX line (marked on the inside of the tank).

Place a container

underneath the spouts. WATER CIRCUIT EMPTY

PRESS OK TO START FILLING PROCESS. Press the appliance

will deliver water from the spout and then turn off.

Note:

●

When using the appliance for the first time, you will need to make four to five coffees, before the appliance starts to deliver a consistent level of beverage quality.

●

When using the appliance for the first time, the water circuit is empty and the appliance could be noisy. This level of noise will reduce as the circuit fills.

●

When making the first four to five coffees it is normal to hear the sound of boiling water. Following this, the noise will reduce.

●

To improve the performance of your appliance, we recommend installing a water softener filter. If your model is not provided with a filter, you can request one from Customer Care.

FIRST USE

Turning the appliance on

IMPORTANT!

During rinsing, a little hot water comes out of the coffee spouts and is collected in the drip tray underneath. During this cycle, keep hands clear of the spout to avoid contact with the water.

Note:

●

Before turning the appliance on, make sure the main switch is pressed.

●

Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which cannot be interrupted.

●

The appliance is ready for use only after completion of this cycle.

To turn the appliance on, press .

The message HEATING UP UNDERWAY PLEASE WAIT will appear on the display.

When heating is complete, the message

changes to: RINSING UNDERWAY, HOT WATER FROM SPOUTS. As well as heating the boiler, this also heats the internal circuits by circulating hot water.

The appliance is ready to use when the

home screen appears on the display.

Turning the appliance off

Whenever the coffee maker is turned off after being used, it performs an automatic rinse cycle.

IMPORTANT!

●

During rinsing, a little hot water flows from the coffee spouts. Keep hands clear of the spout to avoid contact with the water.

●

Never press the main switch while the appliance is on or in stand-by mode.

To turn the appliance off, press .

The message TURNING OFF, PLEASE

WAIT will appear on the display. The appliance will perform a rinse cycle and then go into stand-by mode.

Press the main switch at the side of

the appliance.

To ensure that cleaning message prompts

appear on the display as scheduled, we recommend leaving the coffee maker in stand-by mode. If you will not be using the coffee maker for an extended period, turn the appliance off by pressing the main switch.

FIRST USE

Measuring and setting water hardness

How frequently the appliance alerts you that a descale is required, is determined by the level of water hardness. The appliance has a default water hardness setting of 4. However, to ensure the continued high performance of your coffee maker, it is important to measure the water hardness before the first use.

Measuring water hardness

Remove the ‘total hardness test’ indicator paper from its pack.

Immerse the paper completely in a glass of water for one second.

Remove the paper and shake lightly. After about a minute, a number of red squares

form, which indicates the hardness of the water. Use this result to set the level of water hardness on the coffee maker. Each square corresponds to one level.

Soft water – level 1

Slightly hard water – level 2

Hard water – level 3

Very hard water – level 4

Setting water hardness

Press .

Press or until WATER HARDNESS appears on the display.

To change the level selected, press WATER HARDNESS until the required level

of water hardness is displayed. (Level 1 = soft water; Level 4 = very hard water).

4 Press BACK.

The coffee maker is now programmed with the new water hardness setting.

MENU SETTINGS

Rinsing

Use this function to deliver hot water from the coffee spouts and steam wand, to clean and heat the appliance’s internal circuit. Place a container under the coffee and hot water spouts.

IMPORTANT!

Do not leave the appliance unattended while hot water is being delivered.

Press .

Press or until RINSING appears

on the display. Press to start rinsing.

After a few seconds, hot water is delivered first from the coffee spouts, then

from the steam wand (if inserted). RINSING UNDERWAY, HOT WATER FROM SPOUTS appears on the display, along with a progress bar which fills gradually to indicate the stage of completion. The rinsing cycle will finish automatically. If you would like to cancel this function

press CANCEL.

Note:

●

If the appliance is not used for more than four days, when switched on again, we recommend performing three rinses before use.

●

After cleaning, it is normal for the grounds container to contain water.

Drinks settings

This allows you to view the current drinks settings for each profile. By using this function, you can reset drinks settings to the default value. To customize the drinks settings to your personal preference, see the ‘customizing drinks’ section.

1 Check that the profile you want to change the drinks settings for is active.

The current active profile is displayed on the home screen.

Press or until DRINKS SETTINGS appears on the display. To change the drink

Press

press NEXT.

Press . The values for the first drink appear on the display.

The settings for each drink are displayed on vertical bars. The default value is indicated

by a circle symbol at the side of the bar, while the current value is highlighted by the solid part of the vertical bar.

To go back to the settings menu, press BACK. To scroll and display more drinks,

press NEXT. To reset the default values for the drink displayed, press

Press to confirm. Press BACK to go back.

DEFAULT VALUES SET will appear on the display. Press . The drink has been reset

RESET

to the default value.

Note:

●

To change the drink settings in another profile, go back to the home screen, select the required profile and repeat the steps.

●

To reset all the drinks in a profile to the default values, see the ‘Default Values’ section.

MENU SETTINGS

Set time

To adjust the time on the display: Press .

Press or until SET TIME appears on the display

Press . The time setting panel will appear on the display.

Set the current time by pressing or .

To confirm, press (to cancel, press BACK), then press BACK to go back to the

home screen.

Auto-start

You can set the auto-start time in order to have the appliance ready at a certain time (eg in the morning) so that the appliance is ready to make coffee immediately.

Note: To enable this function, the time must already be set correctly.

To enable auto-start: Press .

Press or until AUTO START appears on the display.

Select the function by pressing AUTO START. The time setting panel appears

on the screen.

Press or to set the time of day you require the coffee maker to

automatically turn on. Press or to disable or enable auto start.

To confirm, press or to cancel and return to the settings menu press BACK.

Press BACK again to return to the home screen.

Note: If the auto-start function is enabled, and the mains switched is turned off, this function will be reset.

Auto off (standby)

The auto-off function can be enabled so that the appliance turns off after a set amount of time.

To programme Auto off: Press .

Press or until AUTO OFF appears on the display.

Press AUTO OFF until the required timeframe is displayed.

Press BACK to go back to the home screen. The function is enabled and the

appliance will turn-off after the timeframe that has been selected.

Energy saving

Use this function to enable or disable energy saving. When enabled, the function reduces energy consumption.

To disable or enable ‘Energy Saving’:

Press .

Press or until ENERGY SAVING appears on the display.

Press or to disable or enable energy saving.

Press BACK.

If enabled, the corresponding symbol appears on the display alongside the time to indicate that the function has been enabled.

MENU SETTINGS

Coffee temperature

To modify the temperature of the water used to make the coffee:

Press .

Press or until SET COFFEE TEMPERATURE appears on the display

along with the current selected temperature of: low, medium, high or maximum.

Press SET COFFEE TEMPERATURE until the required temperature is displayed.

Note: A different temperature can be set for each profile (see section ‘Memorising your personal profile’).

Selecting the language

To change the language of the display:

Press .

Press or until SET LANGUAGE appears on the display.

Press SET LANGUAGE. Press or to display the flag corresponding to the

required language. Confirm your selection by pressing the required flag.

Press BACK to go back to the home screen.

Beep

This enables or disables the beep emitted by the machine each time an icon is pressed or an accessory is inserted/removed.

To disable or enable beeping: Press .

Press or until BEEP SOUND appears on the display.

Press or to disable or enable the beeping.

Press BACK.

Cup light

This function enables or disables the cup lights. The lights come on each time coffee drinks or hot milk is delivered and during each rinse cycle. The lights turn off after a few seconds.

To disable or enable this function, proceed as follows:

1 Press . 2 Press or until LIGHTS appears on the display. 3 Press or to disable or enable the cup lights.

Note: The interior lighting comes on when the appliance is turned on.

Emptying the circuit

We recommend emptying the water circuit if the appliance is to be left idle for a long period of time, or before taking it to customer support for a service or repair:

Press .

Press or until WATER CIRCUIT EMPTYING appears on the display.

Press .

EMPTY GROUNDS CONTAINER AND DRIP TRAY: extract and empty the grounds

container and drip tray. Press NEXT.

MENU SETTINGS

INSERT GROUNDS CONTAINER AND DRIP TRAY: insert the drip tray complete

with grounds container

PLACE 2L CONTAINER UNDER SPOUTS, PRESS OK TO START: position a container

under the coffee spouts and hot water spout. Press .

RINSING UNDERWAY, PLEASE WAIT: the appliance performs a rinse cycle from the

coffee spouts. Do not leave the appliance unattended while hot water is being delivered. EMPTY WATER TANK: extract the tank and empty it completely, then press.

(If the filter is installed) REMOVE WATER SOFTENER FILTER: remove the filter from

the tank. Press NEXT.

INSERT WATER TANK, PRESS OK TO CONTINUE: insert the water tank and press .

WATER CIRC. EMPTYING UNDERWAY: wait for the appliance to empty the circuit.

As the water circuit empties, the appliance could become noisy. This is part of normal operation. Do not leave the appliance unattended while hot water is being delivered. EMPTY DRIP TRAY: remove, empty and reposition the drip tray, then press NEXT.

EMPTYING COMPLETE: press .

Note: When turned on again, the appliance asks for the circuit to be filled.

WATER CIRCUIT EMPTY PRESS OK TO START FILLING PROCESS. Place a container

under the spouts.

Press the appliance will deliver water from the spout and then turn off.

Default values

This resets all menu settings and programmed quantities back to the default settings (with the exception of the language which remains as set).

To reset the default values:

Press .

Press or until DEFAULT VALUES appears on the display. Press .

Press RESET ALL to reset all of the user profiles or alternatively select an individual profile.

RESET DEFAULT VALUES: press to confirm or BACK to cancel.

DEFAULT VALUES RESET: Press or BACK to go back to the home screen.

Statistics

This function displays statistics relating to the appliance, including:

●

The number of drinks that have been prepared.

●

Amount of water that has been delivered.

●

Total descales performed.

●

Container cleans performed.

●

Number of water filters used.

To display the statistics, relating to the appliance:

Press .

Press or until STATISTICS appears on the display.

Press to view all the available statistics by pressing or .

Press BACK to go back to the main screen.

+ 31 hidden pages