Fisher Paykel EB24DSXB1 User Guide

AUTOMATIC BEAN TO CUP

COFFEE MACHINE

EB24 model

USER GUIDE

US CA

CONTENTS

Appliance parts 2

Safety and warnings 4

First use 7

Menu settings 11

Making coffee 15

Making cappuccinos and milk-based coffees 19

Delivering hot water 22

Steam delivery 23

Customizing beverages

Memorizing your personal profile 25

Cleaning 26

Descale 32

Water softener filter 35

Displayed messages 37

Troubleshooting 42

Warranty and service 44

IMPORTANT!

SAVE THESE INSTRUCTIONS

The models shown in this user guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please go to our website fisherpaykel.com or contact your local Fisher & Paykel dealer.

Registration

To register your product visit our website: fisherpaykel.com

APPLIANCE PARTS

Beans container lid

Beans container

Ground coffee funnel

Interior lighting

Grinding adjustment dial

Coffee guide

Service door

Control panel

On/Off/

stand-by button

Infuser

Coffee grounds container

Spouts

Cup

Hot water/steam

light

connection nozzle

Cup tray

Drip tray

APPLIANCE PARTS

Power cord

Power plug

Main switch

Tray for objects

‘Total Hardness

Test’ indicator

paper

Water tank

Ground coffee

measure

Measure

compartment

ACCESSORIES

Milk container

Lid with milk frother

Descaler

Cleaning brush

Water softener filter (some models only)

Steam wand

Connection

nozzle cover

Frothed milk spout

(adjustable)

Milk intake tube

Milk container

Thermal casing

Froth adjustment and clean dial

Lid release buttons

SAFETY AND WARNINGS

IMPORTANT SAFETY INSTRUCTIONS

Your safety is important to us. Keep the following instructions in mind when you are using your coffee maker.

WARNING!

Cut Hazard Take care – some edges are sharp. Failure to use caution could result in injury or cuts.

IMPORTANT!

Failure to observe warnings could result in:

●

Possibly life threatening injury from electric shock.

●

Injury or scalds and burns.

●

Damage to the appliance.

WARNING!

When using your coffee maker, follow basic precautions, including the following:

●

Read all instructions before using the coffee maker.

●

The information in this manual must be followed to minimize the risk of fire, explosion, or to prevent property damage, personal injury or loss of life.

●

Use the coffee maker only for its intended function as described in this user guide.

●

This appliance is intended to be used in household and similar applications such as:

– staff kitchen areas in shops, offices and other working environments – farm houses – by clients in hotels, motels and other residential type environments – bed and breakfast type environments.

●

The manufacturer is not liable for damage deriving from improper use of the appliance.

●

Do not tamper with the controls.

●

The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

●

Children should be supervised to ensure that they do not play with the appliance.

●

Keep all packaging (plastic bags, polystyrene foam) away from children.

●

DESIGNATED USE: this appliance is designed and made to prepare coffee and milk based beverages and hot water. Any other use is considered improper and thus dangerous.

●

The manufacturer is not liable for damage deriving from improper use of the appliance.

●

The surface of the heating element remains hot after use and the outside of the appliance may retain the heat for several minutes depending on use.

●

Clean all the components thoroughly, taking particular care with parts in contact with the coffee and milk.

●

Never immerse the appliance in water.

●

During the rinse cycle hot water flows from the spout. Keep hands clear of the spout to avoid the risk of burns.

SAFETY AND WARNINGS

●

Never touch the appliance with damp hands.

●

Never touch the plug with damp hands.

●

Unplug the appliance directly from the plug only.

●

Never pull the power cable as you could damage it.

●

To disconnect the appliance completely, place the main switch on the side of the appliance in the OFF position.

●

If the appliance is faulty, do not attempt to repair.

●

This appliance produces hot water and steam may form while it is in operation.

●

If you have problems operating this appliance, follow the information provided in the sections ‘Displayed messages’ and ‘Troubleshooting’. If this does not resolve the problem, contact your nearest Authorized Service Centre, Customer Care, or contact us through our website fisherpaykel.com.

MAINTENANCE

●

Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in this user guide.

●

We recommend that you contact Customer Care to arrange service. See your ‘Service and warranty’ booklet for contact details.

●

To prevent damage to the appliance do not use alkaline cleaning agents when cleaning, use a soft cloth and a mild detergent.

●

If the plug or power cable is damaged, it must be replaced by an authorized technical only to avoid all risk.

●

Appliances with removable cord: avoid splashes of water on the power cord connector or socket at the back of the appliance.

●

Do not place weight onto the coffee machine when it is out of the cabinet.

●

Do not rest containers with liquids or inflammable or corrosive materials on top of the appliance.

●

Do not rest large objects which could obstruct movement or unstable objects on the appliance.

●

Never turn off the machine during descaling.

●

The first time you use the appliance, or if it is not used for more than three or four days, rinse all removable accessories which may come into contact with water or milk with hot water.

●

If the appliance is not used for more than three or four days, prior to re-using the appliance, rinse the water circuit as described in this manual.

●

You should diligently carry out automatic cleaning and guided maintenance when prompted by the appliance through the display as described in this manual.

●

Choking hazard. The appliance might contain small parts. Some of those small partsmight be required to get disassembled during cleaning and maintenance operations.

●

Handle with care and keep small parts out of reach of children.

●

Cleaning and user maintenance shall not be made by children without supervision.

Disposal

The appliance must not be disposed of with household waste, but taken to an Authorized waste separation and recycling centre.

SAFETY AND WARNINGS

Operational

●

Customize the water hardness as soon as possible following the instructions in the ‘Water hardness’ section.

●

Keep hands clear of the coffee spout when in operation. The temperature of liquid that flows from the spout could result in burns.

●

During the rinse cycle hot water flows from the spout. Please keep hands clear of the spout to avoid the risk of burns.

●

This appliance produces hot water and steam may form while it is in operation.

●

Models with glass surfaces: do not use the appliance if the surface is cracked.

●

Do not use the appliance when it is out the cabinet. Make sure the appliance is turned off before extracting it. The only exception is adjusting the coffee mill which must be done with the machine extracted (see section ‘Adjusting the coffee mill’).

Note: Use original or manufacturer recommended accessories and spare parts only.

FIRST USE

Checking the appliance

After removing the packaging, make sure the product is complete. If the appliance is damaged, contact customer support.

Note: that coffee has been used to factory test the appliance, so it is possible that there may be traces of coffee in the mill.

●

You should Customize water hardness as soon as possible following the instructions in section ‘Setting water hardness’.

Connect the appliance to the mains

electricity supply.

Display

Appliance

settings menu

My menu to

customize the

beverages settings

Customisable

profiles

Scroll arrow

PROFILE 1 SIZE

ESPRESSO

Selected strength

00:00

COFFEE

Beverage selection

Make sure the main switch on the side

of the appliance is pressed down. To select language press or

until the flag corresponding to the required language appears on the display, then press the flag.

Clock

CAPPUCCINO

Selected

size

Strength selection

STRENGTH

LATTE

MACCHIATO

selection

Size

Scroll arrow

FIRST USE

Follow the instructions indicated on the appliance display:

FILL TANK WITH

FRESH WATER: remove the water tank.

Close the lid and put

the tank back in the appliance.

Open the lid.

INSERT WATER SPOUT:

Check that the steam wand is inserted on the connection nozzle.

Fill with fresh water to the

MAX line (marked on the inside of the tank).

Place a container

underneath the spouts. WATER CIRCUIT EMPTY

PRESS OK TO START FILLING PROCESS. Press the appliance

will deliver water from the spout and then turn off.

Note:

●

When using the appliance for the first time, you will need to make four to five coffees, before the appliance starts to deliver a consistent level of beverage quality.

●

When using the appliance for the first time, the water circuit is empty and the appliance could be noisy. This level of noise will reduce as the circuit fills.

●

When making the first four to five coffees it is normal to hear the sound of boiling water. Following this, the noise will reduce.

●

To improve the performance of your appliance, we recommend installing a water softener filter. If your model is not provided with a filter, you can request one from Customer Care.

FIRST USE

Turning the appliance on

IMPORTANT!

During rinsing, a little hot water comes out of the coffee spouts and is collected in the drip tray underneath. During this cycle, keep hands clear of the spout to avoid contact with the water.

Note:

●

Before turning the appliance on, make sure the main switch is pressed.

●

Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which cannot be interrupted.

●

The appliance is ready for use only after completion of this cycle.

To turn the appliance on, press .

The message HEATING UP UNDERWAY PLEASE WAIT will appear on the display.

When heating is complete, the message

changes to: RINSING UNDERWAY, HOT WATER FROM SPOUTS. As well as heating the boiler, this also heats the internal circuits by circulating hot water.

The appliance is ready to use when the

home screen appears on the display.

Turning the appliance off

Whenever the coffee maker is turned off after being used, it performs an automatic rinse cycle.

IMPORTANT!

●

During rinsing, a little hot water flows from the coffee spouts. Keep hands clear of the spout to avoid contact with the water.

●

Never press the main switch while the appliance is on or in stand-by mode.

To turn the appliance off, press .

The message TURNING OFF, PLEASE

WAIT will appear on the display. The appliance will perform a rinse cycle and then go into stand-by mode.

Press the main switch at the side of

the appliance.

To ensure that cleaning message prompts

appear on the display as scheduled, we recommend leaving the coffee maker in stand-by mode. If you will not be using the coffee maker for an extended period, turn the appliance off by pressing the main switch.

FIRST USE

Measuring and setting water hardness

How frequently the appliance alerts you that a descale is required, is determined by the level of water hardness. The appliance has a default water hardness setting of 4. However, to ensure the continued high performance of your coffee maker, it is important to measure the water hardness before the first use.

Measuring water hardness

Remove the ‘total hardness test’ indicator paper from its pack.

Immerse the paper completely in a glass of water for one second.

Remove the paper and shake lightly. After about a minute, a number of red squares

form, which indicates the hardness of the water. Use this result to set the level of water hardness on the coffee maker. Each square corresponds to one level.

Soft water – level 1

Slightly hard water – level 2

Hard water – level 3

Very hard water – level 4

Setting water hardness

Press .

Press or until WATER HARDNESS appears on the display.

To change the level selected, press WATER HARDNESS until the required level

of water hardness is displayed. (Level 1 = soft water; Level 4 = very hard water).

4 Press BACK.

The coffee maker is now programmed with the new water hardness setting.

MENU SETTINGS

Rinsing

Use this function to deliver hot water from the coffee spouts and steam wand, to clean and heat the appliance’s internal circuit. Place a container under the coffee and hot water spouts.

IMPORTANT!

Do not leave the appliance unattended while hot water is being delivered.

Press .

Press or until RINSING appears

on the display. Press to start rinsing.

After a few seconds, hot water is delivered first from the coffee spouts, then

from the steam wand (if inserted). RINSING UNDERWAY, HOT WATER FROM SPOUTS appears on the display, along with a progress bar which fills gradually to indicate the stage of completion. The rinsing cycle will finish automatically. If you would like to cancel this function

press CANCEL.

Note:

●

If the appliance is not used for more than four days, when switched on again, we recommend performing three rinses before use.

●

After cleaning, it is normal for the grounds container to contain water.

Drinks settings

This allows you to view the current drinks settings for each profile. By using this function, you can reset drinks settings to the default value. To customize the drinks settings to your personal preference, see the ‘customizing drinks’ section.

1 Check that the profile you want to change the drinks settings for is active.

The current active profile is displayed on the home screen.

Press or until DRINKS SETTINGS appears on the display. To change the drink

press NEXT.

Press . The values for the first drink appear on the display.

The settings for each drink are displayed on vertical bars. The default value is indicated

by a circle symbol at the side of the bar, while the current value is highlighted by the solid part of the vertical bar.

To go back to the settings menu, press BACK. To scroll and display more drinks,

press NEXT. To reset the default values for the drink displayed, press

Press to confirm. Press BACK to go back.

DEFAULT VALUES SET will appear on the display. Press . The drink has been reset

to the default value.

Note:

●

To change the drink settings in another profile, go back to the home screen, select the required profile and repeat the steps.

●

To reset all the drinks in a profile to the default values, see the ‘Default Values’ section.

Press .

RESET

MENU SETTINGS

Set time

To adjust the time on the display: Press .

Press or until SET TIME appears on the display

Press . The time setting panel will appear on the display.

Set the current time by pressing or .

To confirm, press (to cancel, press BACK), then press BACK to go back to the

home screen.

Auto-start

You can set the auto-start time in order to have the appliance ready at a certain time (eg in the morning) so that the appliance is ready to make coffee immediately.

Note: To enable this function, the time must already be set correctly.

To enable auto-start: Press .

Press or until AUTO START appears on the display.

Select the function by pressing AUTO START. The time setting panel appears

on the screen.

Press or to set the time of day you require the coffee maker to

automatically turn on. Press or to disable or enable auto start.

To confirm, press or to cancel and return to the settings menu press BACK.

Press BACK again to return to the home screen.

Note: If the auto-start function is enabled, and the mains switched is turned off, this function will be reset.

Auto off (standby)

The auto-off function can be enabled so that the appliance turns off after a set amount of time.

To programme Auto off: Press .

Press or until AUTO OFF appears on the display.

Press AUTO OFF until the required timeframe is displayed.

Press BACK to go back to the home screen. The function is enabled and the

appliance will turn-off after the timeframe that has been selected.

Energy saving

Use this function to enable or disable energy saving. When enabled, the function reduces energy consumption.

To disable or enable ‘Energy Saving’:

Press .

Press or until ENERGY SAVING appears on the display.

Press or to disable or enable energy saving.

Press BACK.

If enabled, the corresponding symbol appears on the display alongside the time to indicate that the function has been enabled.

MENU SETTINGS

Coffee temperature

To modify the temperature of the water used to make the coffee:

Press .

Press or until SET COFFEE TEMPERATURE appears on the display

along with the current selected temperature of: low, medium, high or maximum.

Press SET COFFEE TEMPERATURE until the required temperature is displayed.

Press BACK to go back to the home screen.

Note: A different temperature can be set for each profile (see section ‘Memorising your personal profile’).

Selecting the language

To change the language of the display:

Press .

Press or until SET LANGUAGE appears on the display.

Press SET LANGUAGE. Press or to display the flag corresponding to the

required language. Confirm your selection by pressing the required flag.

Press BACK to go back to the home screen.

Beep

This enables or disables the beep emitted by the machine each time an icon is pressed or an accessory is inserted/removed.

To disable or enable beeping: Press .

Press or until BEEP SOUND appears on the display.

Press or to disable or enable the beeping.

Press BACK.

Cup light

This function enables or disables the cup lights. The lights come on each time coffee drinks or hot milk is delivered and during each rinse cycle.

To disable or enable this function, proceed as follows:

1 Press . 2 Press or until CUP LIGHTING appears on the display. 3 Press or to disable or enable the cup lighting. 4 Press BACK to go back to the home screen.

Note: The interior lighting comes on when the appliance is turned on.

Emptying the circuit

We recommend emptying the water circuit if the appliance is to be left idle for a long period of time, or before taking it to customer support for a service or repair:

Press .

Press or until WATER CIRCUIT EMPTYING appears on the display.

Press .

EMPTY GROUNDS CONTAINER AND DRIP TRAY: extract and empty the grounds

container and drip tray. Press NEXT.

+ 33 hidden pages