Fisher Paykel DD24DTI9N Planning guide
DATUM : FRONT OF CARCASS
in
"
/8"
2 9/16"
21 /4"
5/16"
11/16"
/8"
- 2 /4"
2 1/4"
- 4 5/8"
1 9/16"
– 15/16"
20 /4"
in
4"
2 5/8"
22 1/16"
5/16"
1/16"
1/2"
1/2"
CLEARANCE :
CORNER CUPBOARD
DATUM : TOP OF PRODUCT
23 9/16"
B
PLAN VIEW
23 9/16"
B
C
21 /4"
i
CLEARANCE :
CORNER CUPBOARD
DATUM : FRONT OF CARCASS
i C
21 /4"
24" Double DishDrawer™ Panel Ready Tall
DATA SHEET
Model no:
DD24DTI9_N
DD24DHTI9_N
(refer page for metric measurements)
Product Dimensions
a Overall height* of DishDrawer™
B Overall width** of DishDrawer™
C Depth of DishDrawer™ chassis**
d Ventilation gap between custom panels
e Height of chassis at rear (not including mounted feet)
f Height of mounted feet (adjustable)
g Height of toekick custom panel (adjustable)
h Depth from front of drawer panel to front of toekick
panel***(adjustable)
i Depth of drawer (open) (measured from front datum)**
* Includes adjustable mounted feet and the range of movement.
** Does not include the custom drawer panels, handles or toekick panel to be
manufactured and fitted by cabinetmaker.
*** Assuming panel thickness of 11/16". If the toekick depth is greater than 1
15/16", the panel will need to be cut to clear the underside of the tub, please
refer to the installation manual for more detail.
Note: Service outlet at rear extends both sides, hoses and cords can be routed
to either or both.
– 36
34
0 5 10 20
FRONT VIEW
inches
A
4" 6 /8"
Minimum Clearances
Minimum inside height of cavity from bottom datum
Minimum inside width of cavity
Minimum inside depth of cavity from front datum
Minimum ventilation gap between custom panels
Minimum clearance from underside of bench to top of custom
e
d
g
f
h
PROFILE VIEW
panel
Minimum clearance from bottom of toekick panel to floor
Minimum clearance from a corner cupboard
INDICATES CABINETRY / PRODUCT DATUM -------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
DATE: 28.05.2018
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
CUSTOM PANEL PREPARATION
in
17 /8"
2 7/16"
- 24 /16"
12 1/4"
- 14 1/16"
16 5/16"
- 18 11/16"
5/16"
2 1/4"
- 4 5/8"
5/8"
- 1/16"
20lb
24" Double DishDrawer™ Panel Ready Tall
Model no:
DD24DTI9_N
DD24DHTI9_N
(refer page 4 for metric measurements)
Dimensions
a Minimum height of top drawer panel*
B Width of top drawer and bottom drawer panels
C Minimum height of bottom drawer panel*
D Height from floor to top of bottom drawer panel
E Ventilation gap between top drawer panel and bottom drawer
B
F Height of toekick panel*
A
G Depth of custom panels
a
E
Maximum weight of each drawer panel (including handle)
* The top drawer panel may be extended up, or the bottom panel down
from the fixed gap between both. Adjust the height of the toekick panel
D
C
g
E
accordingly.
NOTE: If the toekick depth is greater than 1 15/16", the panel will need to be
cut to clear the underside of the tub, please refer to the installation manual
and panel preparation downloads for more detail.
C
f
ISO VIEW PROFILE VIEW
DATE: 28.05.2018
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
Loading...