Fisher & Paykel AS/NZS 60335-1, AS/NZS 1044, AS/NZS 60335-2-6 Installation Instructions Manual

Installation instructions

https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Electric/Two_Burners/CE302CPX1/User_Guide_CE302CPX1/02_Installation_instructions

Updated: Sat, 09 Mar 2019 07:23:30 GMT

Powered by

• Read these instructions carefully before installing or using this product.

• Please make this information available to the person responsible for installing the product as it
could reduce your installation costs.

• In order to avoid a hazard, this appliance must be installed according to these instructions for
installation.

This cooktop has been designed and constructed in accordance with the following codes and specifications:

AS/NZS 60335-1 General Requirements for Domestic electrical appliances

AS/NZS 60335-2-6 Particular Requirements for Domestic electrical cooking appliances

AS/NZS 1044 Electromagnetic Compatibility Requirements.

Product dimensions and clearances

The installation shall comply with the dimensions in Figs. 1 and 2, bearing in mind the following requirements:

• A minimum clearance of 40 mm for CE302 models and 30 mm for CE604 models has to be kept between the
bottom of the cooktop and the top of an underbench appliance or a thermal protection barrier (see Figs. 5-7).

1

• Overhead clearances - In no case shall the clearance between the highest part of the cooktop and a range hood

https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Electric/Two_Burners/CE302CPX1/User_Guide_CE302CPX1/02_Installation_instructions

Updated: Sat, 09 Mar 2019 07:23:30 GMT

Powered by

be less than 600 mm. Any other downward-facing combustible surface less than 600 mm above the highest part
of the cooktop shall be protected for the full width and depth of the cooking surface area in accordance with local
regulations in force. However, in no case shall this clearance to any surface be less than 450 mm.

• Side clearances - Where the distance from the periphery of the nearest hotplate to any vertical combustible
surface is less than 50 mm (CE302 models) or 100 mm (CE604 models), the surface shall be protected in
accordance with with local regulations in force to a height of not less than 150 mm above the cooktop for the full
dimension (width or depth) of the cooking surface area.

One side of the cooktop must always be kept clear.

• Protection of combustible surfaces - The required protection shall ensure that the surface temperature of
combustible surfaces does not exceed 50 °C above ambient.

• To comply with this requirement satisfactorily, fix 5mm-thick ceramic tiles to the surface or attach fire-resistant
material to the surface and cover with sheet metal (minimum thickness 0.4 mm).

The underside surface of the cooktop can reach a temperature exceeding 95 °C during

normal use.

2

Fig. 1 CE302 models clearances

https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Electric/Two_Burners/CE302CPX1/User_Guide_CE302CPX1/02_Installation_instructions

Updated: Sat, 09 Mar 2019 07:23:30 GMT

Powered by

Fig. 3 CE302 models product and cutout dimensions

Fig. 2 CE604 models clearances

Fig. 4 CE604 models product and cutout dimensions

3