Firenzi FWM1000 Manual

0 (0)
WASHING MACHINE
1000
AUTOWASH
ON/OFF
QUICK WASH
RINSE HOLD
HALF LOAD
PROGRAMMES
LPR 710
FWM 1000
132991960
INSTRUCTION BOOKLET
GB
Important Safety Information
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.
These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance.
Installation
This appliance is heavy. Care should be taken when moving it.
It is dangerous to alter the specifications or attempt to modify this product in any way.
All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in instructions.
Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.
Child Safety
This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.
Pets and children have been known to climb into washing machines. Please check your drum before use.
The glass door becomes very hot during the washing cycle. Keep children away from the vicinity of the appliance whilst it is in operation.
Keep all packaging well away from children.
Keep all detergents in a safe place out of children’s
reach.
Use
Always unplug the appliance and turn off the water supply after use.
Do not overload the appliance. See relevant section in the instruction book.
Only wash fabrics which are designed to be machine washed. If in doubt, consult the care label on the clothes.
Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed.
Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine.
Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.
Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum.
Only use the advised quantities of fabric softener. Damage to the fabric can ensue if you over-fill. Refer to the manufacturer’s recommendations of quantities.
As some duvets and eiderdowns should be washed in large commercial machines because of their bulk, please check with the manufacturer of the item before washing in a domestic machine.
Leave the porthole door slightly ajar between washes to preserve the door seal.
Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts.
2
Contents
For the User
Important Safety Information Your New Washing Machine Description of the Appliance
Detergent dispenser drawer 5
The Control Panel Operating sequence
Washing 4.5 kg of white cotton at 95°C 7 Load the laundry 7 Measure out the detergent 7 Measure out the fabric softener 7 Select the required option 7 Select the required programme 7 Start the machine 8 At the end of the programme 8
Washing 2 kg of mixed fabrics at 50°C 9 Load the laundry 9 Measure out the detergent 9 Measure out the fabric softener 9 Select the required option 9 Select the required programme 9 Start the machine 9 At the end of the programme 10
7-10
For the Installer
2
Installation Instructions
4
Technical Specifications
5
Unpacking 22 Positioning 22 Water inlet 23
6
Water drainage 23-24 Levelling 24 Special conditions 24 In the interest of the environment 24 Electrical connection 25 Building-in 26-27
21 21
Washing Hints
Which detergent?.... 12 And in which form? 12
Wash Care Symbols Washing Programmes Maintenance and Cleaning
Descaling 16 After each wash 16 Maintenance Wash 16 External cleaning 16 Cleaning the dispenser drawer 16 Cleaning the drawer recess 16 Cleaning the filter 16-17 The dangers of freezing 17 Emergency emptying out 17
Something Not Working Service and Spare Parts Guarantee Conditions
11-12
13 14-15 16-17
18-19
19
20
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions Hints and tips Environmental information
3
Your New Washing Machine
Your new washing machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption.
Automatic cooling of the wash water to 60°C
before draining, with the 95°C programme. This reduces thermal shock to fabrics, helping to prevent creasing.
The special wool programme with its new delicate wash system treats your woollens with extreme care.
Ecological hints
To save water and energy and help protect the environment, we recommend that you follow these hints:
Adjust the quantity of detergent according to the hardness of your water supply, the amount of laundry and the degree of soiling.
A programme without prewash is sufficient for normally soiled laundry.
The machine works more economically if it is fully loaded.
With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature, so saving energy.
Select the “quick” option for lightly soiled laundry.
In the interest of the environment
Materials marked with the symbol are recyclable.
Check with your local Council or Environmental Health Office to see if there are facilities in your area for re-cycling this appliance.
When the appliance is to be scrapped, cut off the power supply cable and make the door lock device unusable to prevent young children from being trapped inside.
Help to keep your country tidy - use authorised disposal sites for your old appliance.
How do we help to protect the environment? We use recycled paper!
Important
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin. If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the wash load manually and select a spin programme. For more detailed information see the section headed "Something Not Working".
4
Description of the Appliance
1
2
7
8
9
3456
1000
AUTOWASH
ON/OFF
QUICK WASH
RINSE HOLD
HALF LOAD
PROGRAMMES
FWM 1000
P0520
1 Detergent dispenser drawer 2 Programme guide 3 “Mains-on” light 4 ON/OFF button 5 “Option” buttons 6 Programme selector dial 7 Door opening handle 8 Filter 9 Adjustable feet
Detergent dispenser drawer
Prewash Main wash Fabric softener
The programme chart is in the interior part of the drawer.
5
The Control Panel
1 2 3 4 5 6 7
1000
QUICK WASH
RINSE HOLD
HALF
LOAD
ON/OFF
PROGRAMMES
FWM 1000
AUTOWASH
1 Programme guide 2 Mains-on light
This light illuminates when the machine starts working and goes out when the ON/OFF button is released.
3 ON-OFF button
By depressing this button the machine starts operating. When depressed again, the machine stops. The push button is provided with a child-proof safety lock. Move the small slider placed in the middle of the button downwards to lock the button in the «off» position.
4 QUICK WASH button
By depressing this button on programmes A, B, C, D and G the wash time is reduced. This is only suitable for garments which are lightly soiled.
5 RINSE HOLD button
Press this button to make the machine stop with water in the drum after the cotton, synthetic or delicate wash cycles. This prevents any creasing which may occur if the clothes are left damp in the drum. When it is convenient for you to empty the machine, simply press this button again so that the machine can proceed to drain and spin, or select the drain programme “P”. If this button is not activated, the washing programmes will end with a spin.
6 HALF LOAD button
Select this button to reduce water consumption on the rinse cycle when washing a smaller load of cottons or linens (maximum load size = 2.25 kg).
7 Programme selector dial
Push the dial to pop it out. Turn the dial clockwise to select the required wash programme.
Before setting the dial to any position the machine must be switched off by depressing the ON/OFF button again.
6
Operating Sequence
P0994
P0004
P0429A
B
QUICK WASH
RINSE HOLD
HALF LOAD
ON/OFF
P0995
Before the first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.
WASHING 4.5 KG OF WHITE COTTON AT 95°C
Suppose you have 4.5 kg of normally soiled laundry to wash. It is white cotton and is suitable for high temperature washing.
1. Load the laundry
Open the door by pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
3. Measure out the fabric softener
If required, pour fabric softener into the compartment marked (the amount used must not exceed the “MAX” mark in the drawer). Close the drawer gently.
4. Select the required option
Depress RINSE HOLD or QUICK WASH button, if your laundry is lightly soiled.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent required and pour it into the main wash compartment . If you wish to carry out the prewash, pour detergent into the compartment marked .
5. Select the required programme
Push the programme selector dial to pop it out and turn it clockwise to the programme B or A (if you wish to perform a prewash).
7
6. Start the machine
P0471S
ON/OFF
Before starting up the machine check that:
the appliance is plugged in
the water supply tap is turned on
the drain hose is correctly and securely positioned
the door and the detergent dispenser drawer are closed.
Depress the ON/OFF button: the mains-on light will illuminate and the machine starts operating.
7. At the end of the programme
The machine stops automatically. If you have depressed the RINSE HOLD button, the
machine will stop with the water left in the tub, to prevent the fabric from creasing. To drain the water and spin, release the same button. To drain only, select programme “P”.
The door is controlled by a safety device which releases 2 minutes after the end of the programme.
Switch the machine off by depressing the ON/OFF button again. The mains-on light goes out.
When the programme has finished you are advised to unplug the appliance and turn off the water tap.
8
WASHING 2 KG OF MIXED FABRICS AT 50°C
P0995
P0994
P0004
P0471S
ON/OFF
P0429B
G
QUICK WASH
RINSE HOLD
HALF LOAD
ON/OFF
Suppose you have 2 kg of Mixed fabrics to wash. They are rather delicate fabrics and should not be washed at a high temperature.
1. Load the laundry
Open the door by pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent required and pour it into the main wash compartment .
4. Select the required option
Depress the RINSE HOLD or QUICK WASH button if your laundry is lightly soiled.
5. Select the required programme
Push the programme selector dial to pop it out and turn it clockwise to the programme G.
3. Measure out the fabric softener
If required, pour fabric softener into the compartment marked (the amount used must not exceed the “MAX” mark in the drawer). Close the drawer gently.
6. Start the machine
Before starting up the machine check that:
the appliance is plugged in
the water supply tap is turned on
the drain hose is correctly and securely positioned
the door and the detergent dispenser drawer are closed.
Depress the ON/OFF button: the mains-on light will illuminate and the machine starts operating.
9
Loading...
+ 18 hidden pages