Fire-Lite BB-55 User Manual
This cabinet consists of a backbox with an integral,
lockable door that is hinged on the bottom to swing
down for access.
It is designed to be mounted a minimum of 6 inches
(15.24 cm) below the fire alarm control panel
(FACP). When both cabinets are surface mounted,
the knockout in the bottom-right corner of the FACP
will line up directly above the knockout in the topÂright corner of this enclosure.
This enclosure should be mounted in a clean, dry,
vibration-free area, using the six holes provided.
Battery/Peripherals Enclosure
Product Installation Document
PN 50295:B 07/24/2001 ECN 01-250
FACP
6 inch
minimum
(15.24 cm)
Conduit
Note: The enclosure has 0.875 in. (2.2225 cm)
knockouts which accept standard 0.75 in. (1.905 cm)
conduit.
7.730 in.
(196.342 mm)
DoorLeft Side
7.730 in.
(196.342 mm)
4.0 0 in .
(101.6 mm)
3.875 in.
(98.425 mm)
Battery/Peripherals Enclosure
2.80 in. (71.12 mm)
Top
24.125 in. (612.775 mm )
16.00 in. (406.4 mm )
8.0 0 in .
(203.2 mm)
2.6 6 in .
(67.564 mm)
2.125 in.
(53.975 mm)
14.06 in.
(357.124 mm)
2.00 in. (50.8 mm)
3.250 in. (82.55 mm)
7.250 in.
(184.15 mm)
15.00 in.
(381 mm)
1.25 in
(31.75 mm)
Battery/Peripherals Enclosure PN 50295:B 07/24/2001
23.750 in. (603.25 mm )
Front (without door)
10.00 in.
(254 mm)
14.75 in
(374.65 m
Loading...