Fiberstars 6004 installation Guide
6004 SERIES
INSTALLATION MANUAL
10.5” 9.75”
22.75”
SPECIFICATIONS
CONSTRUCTION
Case: High Impact Polycarbonate
Ventilation: 110 cu ft/min air volume
Acoustic rating: 50dB(A)
Weight: 20 lbs.
12”
MAXIMUM SOIL HEIGHT:
DO NOT ALLOW FILL TO
EXCEED THIS LEVEL!
10.75”
4”
4”
13”11.5”
LAMP
Type: Metal-Halide, proprietary design
Lamp life: 6000 hrs average
Cool down restrike period: 3 minutes
Replacement p/n: Y20-6000
ELECTRICAL
Voltage required: 120VAC 60Hz
Power consumption: 200 Watts max
Start current load: 4.4 amps
Current usage: 1.8 amps
79-15022-00 Rev. C
44259 NOBEL DRIVE FREMONT, CA 94538 TEL(800)327-7877 FAX(510)490-3247 www.fiberstars.com
WARNING: DO NOT INSTALL
WITHIN 1.5M (5 FT.) OF A POOL,
SPA ,OR HOT TUB.
ADVERTISSEMENT: NE PAS INSTALLER A MOINS DE 1,5 M D'UNE
PISCINE OU D'UNE CUVE DE RELAXATION.
ELECTRICAL CONNECTIONS
6004
120v 60HZ ONLY
TOGGLE SWITCH POSITIONS
MANUAL CONTROL
COLOR WHEEL
ON
COLOR WHEEL
OFF
EXTERNAL AUTO CONTROL
COLOR WHEEL
OPTIONAL RM6000 CONTROL
COLOR WHEEL
POWER
ON
POWER
OFF
POWER
POWER
EXTERNAL
COLOR WHEEL
CONTROL
(BROWN)
GREEN WHITE BLACK
GROUND NEUTRAL HOT
EXTERNAL AUTO CONTROL HOOK-UP FOR COLOR WHEEL
For Jandy Aqualink, Compool, Aquadyne, etc.
Run a 120V hot wire to the illuminator from a second relay in the control's
sub panel for the color wheel control. Connect this wire to the folded
brown wire with fuse. Place the Color Wheel toggle switch in the bottom
position.
OPTIONAL RM-6000 WIRELESS REMOTE
1 Year warranty!
Light On
Light Off
This RM-6000 Automatic Operating System package is
specifically designed for the Lifetime iIluminatorTM fiber optic
illuminator and should not be modified or adapted in any way.
This is an electric component and should only be installed by a
qualified technician. Please follow the instructions carefully.
RANGE IS APPROXIMATELY 75 FEET DEPENDING ON
CONDITIONS.
Color Wheel Start
Color Wheel Stop
TOGGLE SWITCH POSITIONS
OPTIONAL RM-6000 CONTROL
COLOR
WHEEL
POWER
Loading...