Fiat Multipla 2005 User Manual

FIAT
MULTIPLA

Bluetooth

®

3

TABLE OF CONTENTS

OVERVIEW .......................................................................................................................... 4

SYSTEM COMPONENTS ................................................................................................ 5

COMPATIBLE MOBILE PHONES .................................................................................. 5

ACTIVATING THE HANDS-FREE KIT ........................................................................ 6

PAIRING YOUR MOBILE PHONE AND THE HANDS-FREE KIT

FOR THE FIRST TIME ........................................................................................................ 6

PAIRING WITH OTHER ADDITIONAL PHONES .................................................. 6

CLEARING THE MEMORY .............................................................................................. 7

PAIRING PRIORITY .......................................................................................................... 7

COMMUNICATING .......................................................................................................... 7

ERICSSON/SONY ERICSSON PHONES .................................................................... 8

NOKIA 6310, 6310i, 6650, 7600, 8910 PHONES ...................................................... 10

NOKIA 3650, 3660, N-GAGE, AND SIEMENS SX11 PHONES............................ 11

TROUBLESHOOTING ...................................................................................................... 13

4

OVERVIEW

Bluetooth

®

wireless technology en­ables wireless connection between
your mobile phone and the hands-free
kit installed on your car.

Communication is based on the
transmission of radio shortwaves, that
exchanges data and voice at a speed of
approx. 1 Mb/sec. within a range of
about 10 metres.

The radio frequency used by Blue-

tooth

®

wireless technology is not sub­ject to restrictions or limitations and
is free of charge.

– automatic storage of your tele­phone directory (only available with
Ericsson/SonyEricsson phones);

– use of different telephone numbers
for each contact (e.g. home, work, cel­lular according to mobile phone type);

– starting/answering/refusing calls
with voice command (according to
mobile phone type);

– volume adjustment through phone
menu and through sound system vol­ume controls (see the Sound System
manual);

– “confidential” conversation mode,
to switch from hands-free mode to
phone mode (according to mobile
phone type);

– echo and background noise reduc­tion.

The hands-free kit with voice recog­nition enables to make and receive
calls safely and securely under what­ever driving condition without re­moving your hands from the steering
wheel as required by current regula­tion.

The system installed on your car of­fers you the following functions:

– automatic mute of the car radio
during calls;

– hands-free conversation;

– conversation diffusion through car
speakers;

– pairing of up to three mobile
phones with activation of one mobile
phone at a time (for connection pri­ority see next pages);

– voice recognition (according to
mobile phone type);

HANDS-FREE KIT WITH VOICE RECOGNITION
AND Bluetooth

®

wireless technoogy

5

SYSTEM COMPONENTS

The hands-free kit consists of the fol-

lowing main components:

– electronic control box
– microphone
– keypad

The electronic control box, located

in the dashboard, houses the Blue-

tooth

®

wireless technology radio
transmitter, the signal processing mi­croprocessor and the operating soft­ware.

The high-grade microphone housed
in the front roof lamp has been de­signed to guarantee optimum com­munication under whatever condition.

The keypad fig. 1, located on the
panel housing the rear power window
controls, features two buttons, A and
B-fig. 1, to be used for controlling
every function of the hands-free kit.

Press button A-fig. 1:

– to activate voice recognition;

– to answer a call or dual call;

– to redial the last number called;
– to activate the “confidential” mode.

Press button B-fig. 1:
– to end the communication;
– to refuse a call.

Press buttons A and B-fig. 1 si­multaneously for at least 2 sec­onds for clearing the system
memory.

IMPORTANT Clearing the mem-

ory will disconnect all stored phones,
will clear any phone number stored in
the system memory and will require
to repeat the pairing phase.

COMPATIBLE MOBILE
PHONES

Compatible mobile phones are those

tabulated below:

Make Model

Ericsson R520, T39m, T68m

Motorola V500, V525, V600

270C, 280i

Nokia 3650/3660,

6310, 6310i, 6600,

6650, 7600,

8910, 8910i, N-Gage,

Panasonic X70

Philips Fisio 820, Fisio 825

Siemens S55, S56, SX1

Sony Ericsson T68i, P800,

P900,T606/
T610/T630,
Z600/Z608

PDA/Smartphone E200, XDA II

fig. 1

F0E0695m

6

ACTIVATING THE HANDS­FREE KIT

After first pairing, just turn the igni­tion key to MAR to activate the sys­tem. To pair your phone and the
hands-free kit after first pairing, get in­to the car with your phone on and the

Bluetooth®function active.

PAIRING YOUR MOBILE
PHONE AND
THE HANDS-FREE KIT FOR
THE FIRST TIME

To pair your mobile phone with your
hands-free kit for the first time you
shall activate the Bluetooth®function
on your phone as described on your
phone user’s guide. The correspond­ing icon is displayed on your phone
when the function is active.

When pairing for the first time, the
message “Accoppiare l’apparecchio”
(pair kit) will be heard (the message will
always be in Italian since it is the default
language). Phone/hands-free kit pairing
procedure described in the phone
manual shall therefore be carried out
(follow the pairing instructions given
on your phone user’s guide).

IMPORTANT When the use of

the hands-free kit with Bluetooth

®

wireless technology is not desired,
message “Accoppiare l’apparecchio”
(pair kit) can be prevented from being
repeated by setting car radio channel
PHONE minimum volume (see Sound
System manual). Turn the sound sys­tem on to hear message “Accoppiare
l’apparecchio” (pair kit).

During the pairing procedure
the message asking for the pass­code will be displayed; enter
“1234” as passcode and then con­firm it.

Once this done, connection between
your phone and your hands-free kit
will take place automatically as soon
as the two devices are less than a few
meters apart. A “beep” will be heard,
indicating that connection is estab­lished. Here follows an example of first
pairing procedure for the most com­mon mobile phones.

IMPORTANT The system oper­ates only when the ignition key is
turned to MAR. Pairing procedure
shall be performed only the first time
you pair your phone and your hands­free kit. Should instruction “Accoppi­are l’apparecchio” (pair kit) not be
heard at first pairing, reset the system
by pressing simultaneously buttons A-
fig. 1 and B-fig. 1 on the keypad for
2 seconds at least.

PAIRING WITH OTHER
ADDITIONAL PHONES

If you decide to pair another phone,
you just have to follow the ordinary
pairing procedure described in the
previous paragraph, in this way you
can connect up to 3 mobile phones.
To pair other phones you shall reset
the system (any phone number stored
will be cleared).

7

CLEARING
THE MEMORY

Press the green A-fig. 1 and red B-

fig. 1 buttons simultaneously for at least

2 seconds for clearing the system mem­ory.

IMPORTANT Clearing the memo­ry will disconnect all stored phones, will
clear any phone number stored in the
system memory and will require to re­peat the pairing phase.

PAIRING PRIORITY

If 2 mobile phones at least are paired,
the first phone paired (in chronologi­cal order) will have highest priority.
This means that when getting into the
car with system active (key at MAR),
this will be the first phone to be
searched and, if present, to be con­nected. Should the priority phone not
be found, the system will then search
for the other phones.

COMMUNICATING

Find below a description of the main
communication procedures valid for
almost all mobile phones.

Making a call manually:

– dial the number on the mobile
phone keypad;

– press directly the phone button to
start the call;

– the call will be switched automati­cally to hands-free mode (on certain
phone models, e.g. SIEMENS S55, but­ton A-fig. 1 must be pressed to shift
the telephone call to hands-free
mode).

Making a call using the voice
recognition (after assigning a
voice tag to a phonebook
entry):

– press button A-fig. 1 on the key­pad;

– wait for sound signal to be heard
and/or “PHONE” writing to appear on
sound system display;

– pronounce the name of the person
you wish to call;

– the system will repeat the name for
confirmation and then will start the
call;

– if the name pronounced by the sys­tem is not the required one, press but­ton B-fig. 1 on the keypad and repeat
the procedure.

Call through voice recognition is pos­sible only if voice tags have been as­signed to phonebook entries.

The hands-free kit recognises all
voice tags recorded on the phone thus
enabling to call with voice recognition
any voice tagged number.

It is however possible to store (ac­cording to mobile phone type) voice
tags directly in the hands-free kit mem­ory but, in this case, the hands-free kit
will recognise just those voice tags.

8

IMPORTANT Voice prompts are
recognised by the system only if prop­erly recorded, for this reason you have
to speak out naturally and clearly.

To obtain optimum operation,
please, comply with these recommen­dations:

– close the doors and windows;

– turn off your engine and ventilation
(key at MAR);

– make the recording from the dri­ver’s seat;

– if using long names (e.g.: “John
Brown” instead of “John”) notice that
the system will record a voice tag for
max. 2 seconds.

IMPORTANT Before using voice
prompts check that Bluetooth

®

wire­less technology, “Voice recognition”
and “Wordspotting” functions on
your phone are active (according to
mobile phone type). Voice recognition
performances are available and de­pending on mobile phone model used.

– to end the call, press button B-fig.

1 once.

IMPORTANT The second call can

be accepted or refused only if the
“Avviso di chiamata” (“Call waiting”)
function on your phone is active.

ERICSSON/SONY ERICSSON
PHONES

Assigning a voice tag to a name

– From the “Connectivity” menu, se-

lect “Accessories”;

– select the system menu;
– select “Phone book”;
– select “List” (the list of your phone

book entries will be displayed);

– choose a name and select it;

– you will hear the system prompt,
then you have to pronounce clearly
the name displayed towards the mi­crophone located in the front roof
lamp;

Answering a call:

press button A-fig. 1 on the keypad.

Refusing a call:

press button B-fig. 1 on the key-

pad.

Ending a call:

press button B-fig. 1 on the key-

pad.

To redial last number called:

press button A-fig. 1 on the key-
pad and keep it pressed up to redi­alling of the number.

Dual call (according to mobile
phone type):

– press keypad button B-fig. 1 to
refuse the new call;

– press keypad button A-fig. 1 once
to pick up the new call;

– press button A-fig. 1 once again to
return to the first call;

9

– the system will repeat the name
and ask you to repeat it for confirma­tion.

Repeat the procedure for each name
to be voice tagged.

For proper recording of voice tags
comply with these recommendations:

– make recording in quite place;

– close the doors and windows;

– turn off your engine, radio and ven­tilation;

– speak out clearly and naturally to­wards the microphone.

Keywords

The hands-free kit has two preset
voice prompts (“Telephone” and
“Hang up”). “Telephone” is used to
call or answer a call (function of but­ton A-fig. 1 on the keypad, whereas
“Hang up” is used to refuse or end a
call (function of button B-fig. 1).

You need to record keywords for
use with “Wordspotting” option, pro­ceed as follows:

– from the “Connectivity” menu, se­lect “Accessories”;

– select the system menu;

– select “Voice recognition”;

– select “Keywords”;

– select the word to be recorded
(“Telephone” or “Hang up”);

– you will hear the system prompt,
then you have to pronounce clearly
the name displayed towards the mi­crophone located in the front roof
lamp;

– the system will repeat the name
and ask you to repeat it for confirma­tion.

Making a call using the
“Wordspotting” option:

– pronounce the keyword “Tele-

phone”;

– wait for the beep;
– pronounce the name you wish to

call;

– the system will repeat it for con-

firmation and then will start the call;

– if the name pronounced by the sys­tem is not the one you desire, say
“Hang up” or press button B-fig. 1 on
the keypad and repeat the procedure.

Answering/refusing/ ending a
call using the “Wordspotting”
option:

IMPORTANT The “Wordspot-

ting” option (for answering, refusing
or ending a call through voice
prompts) is variable and it depends on
the type of cellular phone being used.
For certain models it may therefore
be necessary to press first buttons A-
fig. 1 and B-fig. 1 and then pro­nounce the “Wordspotting” required
to answer, to refuse or to end a call.

10

menu and select the Bluetooth

®

wireless technology option and then
“View paired devices”; when the sys­tem name is displayed select “Op­tions” and then “Request conn. Au­thorisation”.

Storing names

To assign a voice tag to a name, ac­cess your phone book, find the desired
name and click in sequence on “De­tails”, “Options” and “Add voice tag”.
The following message is displayed
“Press Start then speak after the
tone”. Then press “Start” and say the
name.

To remove the voice tag for any
name, access your phone book and
click in sequence on “Details”, “Op­tions” and “Voice tag”.

By clicking “Change” you can re­record over the voice tag.

By clicking “Erase” you will delete the
voice tag recording.

Clearing the system memory

– Press and hold simultaneously both
buttons A-fig. 1 and B-fig. 1 on the
keypad;

– reset will be announced by the sys­tem.

IMPORTANT Clearing the mem­ory will disconnect all stored phones,
will clear any phone number stored in
the system memory and will require
to repeat the pairing phase.

Adjusting the volume

Use the keys of the handset to adjust
the volume of the conversation.

NOKIA 6310, 6310i, 6650,
7600, 8910 PHONES

IMPORTANT After getting into

the car and turning the ignition key to
MAR, your phone should ask you
whether to establish the connection.
If you want to, you can disable this
function. To do that, go into the phone

– to answer a call say “Telephone”;
– to hang up say “Hang up”;
– to refuse a call say “Hang up”.

Copying the phone book to
hands-free kit system memory

Bluetooth

®

wireless technology en­ables to copy the cellular phone book
to the hands-free kit system memo­ry.

IMPORTANT You can only copy
the entries stored in phone memory,
therefore before copying your phone
book to the system memory, you are
recommended to transfer all entries
from the SIM card to the phone mem­ory.

Copying the phone book:

– from the “Connectivity” menu, se­lect “Accessories”;

– select the system menu;

– the system will start data transfer
and display a message on the phone;

– at the end of operation another
message will be displayed.

11

Communicating

Making a call
manually

Use the phone keypad to dial the
number. Your call will be connected
automatically in hands-free mode. Key­pad buttons A-fig. 1 and B-fig. 1 are
the tools for making and receiving calls.

Making a call using the voice
recognition

Press button A-fig. 1 on the keypad
and wait for the tone. Then say the
name of the person you want to call.

To redial last number called

Press button A-fig. 1 on the keypad
and keep it pressed up to redialling of
the number.

Answering a call

Press button A-fig. 1 on the keypad.

Refusing a call

Press button B-fig. 1 on the keypad.

Dual call

– Press the keypad button B-fig. 1

to refuse the new call.

– Press the keypad button A-fig. 1

once to communicate with new caller.

– Press button A-fig. 1 once again to

return to your first caller.

– Press button B-fig. 1 once to end

the communication.

Adjusting the volume

Use the keys of the handset to adjust

the volume of the conversation.

Conversation in “confidential”
mode

Press the keypad button A-

fig. 1 briefly to switch the conversa-

tion to hands-free or handset mode.

It is also possible to activate the
“confidential” mode directly from the
telephone set: see telephone set man­ual.

Clearing the memory

Press and hold pressed simultane-

ously both buttons A-fig. 1 and B-fig.

1 on the keypad.

IMPORTANT Clearing the mem-

ory will disconnect all stored phones,
will clear any phone number stored in
the system memory and will require
to repeat the pairing phase.

NOKIA 3650, 3660, N-GAGE,
6600 AND SIEMENS SX1
PHONES

IMPORTANT After getting into

the car and turning the ignition key to
MAR, your phone should ask you
whether to establish the connection.
If you want to, you can disable this
function. To do that, go into the phone
menu and select the Bluetooth

®

op­tion and then “Linked equipment”; se­lect the system name, “Options” and
then “Def. as authorised”.

12

Dual call:

– press keypad button B-fig. 1 to

refuse the new call;

– press keypad button A-fig. 1 once

to communicate with new caller;

– press button A-fig. 1 once again to

return to your first caller;

– press button B-fig. 1 once to end

the communication.

Conversation in “confidential”
mode

Press button A-fig. 1 briefly to
switch the conversation to hands-free
or handset mode.

It is also possible to activate the
“confidential” mode directly from the
telephone set: see telephone set man­ual.

Auto answer

From your phone, display the “Main
menu” and select “Tools”.

Then select:

– “Settings” for Nokia 3650, 6600
and Siemens SX1 telephones;

– “Tools” for Nokia N-GAGE tele-

phones.

Select in sequence “Settings”, “Ac-

cessories” and “Handsfree”.

Select in sequence “Automatic an­swer”, “Options”, “Change”, “On”
and confirm with “OK”.

Adjusting the volume

Use the keys of the handset to adjust
the volume of the conversation.

Clearing the memory

Press and hold pressed simultane­ously both buttons A-fig. 1 and B-fig.

1 on the keypad.

IMPORTANT Clearing the mem-

ory will disconnect all stored phones,
will clear any phone number stored in
the system memory and will require
to repeat the pairing phase.

IMPORTANT You can select the
required hands-free kit system settings
from the accessories menu.

Communicating

Answering a call:

– press button A-fig. 1 on the key­pad.

Refusing a call:

– press button B-fig. 1 on the keypad.

To redial last number called:

– press button A-fig. 1 on the key­pad and keep it pressed up to redialling
of the number.

TROUBLESHOOTING

PROBLEM

The system is not working
The system says that the Bluetooth

®

wireless

technology is not detected
Your telephone does not detect the hands-free kit

Your telephone is not detected
The person you are calling complains of the bad

sound quality during communication
The person you are calling complains of an echo

during communication
You cannot hear the voice of the person

you are calling
No connection after entering

the passcode “1234”
Your telephone is detected too slowly

when switched on
When making a call with voice recognition

the system says that the name
you desire is not voice tagged

Dual call failing
Certain phone book entries are not copied

in the system memory
The system does not recognise voice prompts

13

SOLUTION

Check that the ignition key is turned to MAR
Switch off your telephone and then switch it back on again (if the hands-free kit is not

operating)
Switch off your telephone and then switch it back on again

Check that the connection of the Bluetooth

®

wireless technology of your telephone is

enabled (refer to the manual of your phone, if necessary)
Repeat the connection phase
Make sure that you are speaking clearly and according to microphone direction

Lower the volume on the mobile phone. Also lower the volume of car radio channel
PHONE, if necessary (see Sound System manual)

Adjust the volume on the mobile phone. Also check the volume of car radio channel
PHONE, if necessary (see Sound System manual)

Go back to the main menu and repeat the pairing procedure

Set user priority (refer to paragraph “Pairing priority”)

Check that the required name is voice tagged
Repeat the name clearly towards the microphone

Check that the “Avviso di chiamata” (Call waiting) option on your phone is enabled
Check that these entries are present in the phone book and not only in the

SIM card memory

Check that Bluetooth®wireless technology, “Voice recognition” and “Wordspotting”
options on your phone are enabled

IMPORTANT System checks and repairs, if required, shall only be performed by Fiat Dealership.

NOTES

Fiat Auto S.p.A.

After Sales - Post Vendita - Assistenza Tecnica - Ingegneria Assistenziale

Largo Senatore G. Agnelli, 5 - 10040 Volvera - Torino (Italia)

Print no. 603.46.602 - II/2005 - 1

st

Edition

ENGLISH