Ferm TW-820 Instructions Manual

Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com 0301-16

Ferm Woodworking Bench

TW-820

USER’S MANUAL

Art.nr. 730825

Screwfix Art.nr. 18684

UK Subject to change

Document Ref:
TW-820/18684

Copyright ©
These instructions are the sole property of Ferm-Omega Tools and may not be reproduced

JOINTER’S BENCH

SAFETY INSTRUCTIONS

The following symbols are used in these instructions for
use:

Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of the

instructions in this manual.

Denotes risk of electric shock.

Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.

Ferm products are manufactured to high quality stan­dards they are safe and fit for purpose at time of sale, but
all tools can be dangerous if the correct precautions are
not taken.
Always follow these instructions, do not carry out the
operation until you are sure you can do so in safety.
Remember to consider the work environment for safe
operation as well as safety for tool use.

Warning! When using electric tools, basic safety

precautions should always be followed to reduce
the risk of fire, electric shock and personal injury. Read all
these instructions before attempting to operate this product.
Save these instructions for future reference.

PERSONAL SAFETY
Use Personal Protection Safety Equipment

Protect eyes with safety glasses or goggles note: the use
of safety protective eyewear without the CE mark can
lead to serious injury if the lens breaks. A suitable dust
mask should be worn if cutting, drilling or sanding is
dusty, in particular chipboard or MDF.
Approved safety footwear and headgear should worn as
appropriate, for example on building works or when
heavy weights are involved. Wear suitable gloves and
apron to protect against sparks/debris. Wear earplugs
or ear defenders.

Dress properly

Do not wear loose clothing or jewellery. It can get caught
in moving parts. Non-skid footwear is recommended
when working out doors. Wear protective hair covering
to contain long hair.

Stay alert

Watch what you are doing Use common sense. Do not
operate tools when tired or after taking alcohol or pre­scription/ non-prescription drugs.

OPERATIONAL SAFETY
Concentrate

Routine and repetition can lead to mistakes. Remember
that a slight lack of concentration can result in serious
injuries in a split second

Keep work area clean

Cluttered areas and benches invite injuries.

Consider the work environment

Do not expose power tools to rain or use them in damp
or wet locations. Keep work area well lit. Do not use
power tools in the presence of flammable liquids, vap­ours or gases.

Guard against electric shock

This unit contains dangerous voltages. Use a RCD (residual
current device) to provide protection against electrical shock.

Prevent body contact with grounded surfaces (e.g. pipes,
radiator, ranges or refrigerators).

Keep children and pets away

Do not let children or pets come into contact with the
tool, extension cable or work area.

Do not force the tool

It will work better and safer at the rate for which it was
intended.

Use the right tool

Do not force small tools or attachments to do the job of a
heavy-duty tool. Do not use tools for purposes for which
they were not intended; for example do not use a circular
saw for cutting trees or logs.

Do not abuse the cable

Never carry the tool by the cable or pull it to disconnect
it from the power socket. Keep the cable away from heat,
oil and sharp edges. Do not touch the metal plug pins
when connecting or removing the plug.

Do not over-reach

Keep a proper footing and balance at all times.

Disconnect tools from power supply

When not in use, before servicing and when changing
accessories such as blades, bits and cutters.

Always switch off and unplug the sander from the
power supply before making adjustments or chan-

ging abrasive belts.

Remove adjusting keys and wrenches

Ensure that they are removed from the tool before swit­ching on.

Avoid unintentional starting

Do not carry plugged in tools with your finger on the
switch. Check that the switch is off before plugging in to
socket.

2 Ferm Ferm 7

EXPLODED VIEW