Ferguson M 3610 U, M 3615 UT Operating Instructions Manual

M 3610 U AND M 3615 UT

COLOUR TELEVISION

WITH FASTEXT

Mains connection and remote batteries

Mains connection

The TV is suitable for use on a.c. mains supply, 220-240V,50 Hz only.
It must not be connected to d. c. mains.

ThemainsleadoftheTVisfittedwitha moulded plug.If themains
sockets are not compatible or if for any reason the plug is
removed please follow these directions:

The moulded plug cannot be rewired and if removed must be disposed of safely.
DO NOT under any circumstances plug the severed plug into any mains socket as this could

resultin electric shock.
IMPORTANT:Iftheplug is removedrewirenewplug as follows:The wiresin the mains plugare

coloured in accordance with the following code: BLUE - NEUTRAL / BROWN - LIVE.
As the colours of the wires in the mains lead of this apparatus may not correspond with the

coloured markings identifying the terminals in your plug, proceed as follows:

- BLUE wire to the terminal coded N (Neutral) or coloured black.

- BROWN wire to the terminal coded L (Live) or coloured red.
DO NOT make any connectionto the terminal in the plug which is marked by the letterE or by

the safety ear th symbol
Afused plugmustbefittedwitha 5A fuseapprovedbyASTAorBSItoBS1362 and fusecovers

must always be securely replaced.

or coloured green or green and yellow.

Remote control batteries

The remote control requires two batteries size AA as supplied with the unit.
Unclip the cover at the rear and insert the batteries the correct way round as
shown. The ends are usually market + and -.

Replace the batteries when the unit no longer operates at normal viewing distances.

When replacing batteriesdo not mix oldand new -do not mixmakes and types.
alkaline types are recommended for long life.Never risk damage to theremote
controlby extreme heat -do not leave close to a radiatoror on a window ledge
in direct sunshine.

1

Connections

220- 240V ~50Hz

2

1. Aerial Socket

Enables connection of the aerial and, if required, a video recorder (see manual for latter).
To tune the channel reserved for your video recorder, start up the recorder then carry out

MANUAL CHANNEL SETTING operations.
Store at any programme ending with a 9 (9,19,29, etc.)

Each time you use the video recorder , switch to the channel assigned to it.

2. SCART Socket

This is used to connect:

– a VHS, 8 MM, S–VHS or Hi–8 video recorder or camcorder,
– a P AY TV decoder,
– a video games console.
To use the connected device, select the audiovisual programme by pressing the

Para ciertos aparatos esta selección se efectúa en forma automática.
A V is display ed at the bottom of the screen.

IfyouhaveanS-VIDEOdevice,pressthe
of the screen for a few seconds.

When you switch off the device and if you have not changed channel during play, the TV set
automatically returns to the previous channel.

If the TV set has been switched on by the video recorder, it will be placed on stand–by when the
video recorder is switched off.

buttonagain. S-VIDEO is then display edat the bottom

button.

3. Audio / Video CINCH Sockets

These are used to connect a VHS or 8 mm camcorder.
Press the

When you switch off the connected device, the TV set remains in audiovisual (A V) mode.
Call up the channel you wish to watch using the numerical keypad on the remote control.
In order to maintainthe optimum sound and picture qualityof your TV set, avoidconnecting 2 devi ces

to the SCART socket and the AUDIO/VIDEO sockets simultaneously .

button to select the audiovisual programme to view your recordings.

3

Remote Control

Display programme No.

and sleep timer

Display Timer Menu

(Green button)

Call up personal

adjustments

(Red button)

Confirmanactionor

validate a menu

Toleaveamenu

V olume level

(Yellow
button)

option

Stand-by

Inactive

Call upTeletext/Fastext(pur-

ple key)

Adjustment: move to
Right/Left in menus and
select one of the proposed
options

To go to Picture and
Channel Adjustment
menus

Move Up and Down in
the menus

To change programme

Sound mute

To switch to connected

equipment

(e.g.: video recorder)

8

Direct access to
programmes and entering
numerical values in
menus

The red, yellow, green and
blue buttons are also used for
teletext.

Batteries: Remove the lid at the back of the remote control and insert two 1.5

V, LR06 batteries.

”Please respect the environment! Before throwing any batteries away, consult
your distributor who may be able to take them back for specific recycling..”

4