Page 1
THE SOUND THAT CREATES LEGENDS
Pro Junior
TYPE: PR 257
Owner,s Manual
P/N 047443
Page 2
Pro Junior introduction
The Fender Pro Junior amplifier is the ultimate in a
professional practice amp. A TRUE ALL TUBE AMP
with that late nite blues tone found nowhere else but
in a Fender.
The Fender Pro Junior amplifier offers both simplicity
and versatility through its top panel mounted controls:
Power Switch, Power On indicator, Tone, Volume
and Input jack. You‘ll get smooth tones from sparkly
clean all the way to the edge with the Fender Pro
Junior.
The speaker is connected through a standard 1/4”
jack allowing the player‘s choice of the internal
speaker or any external 8Ω cabinets.
Pro Junior sound settings
The Fender Pro Junior‘s compact size, professional
tone, and traditional styling make it ideal for practice, backstage warm up, and serious recording.
The selection of a Fender amplifier will reward you
with years of quality performance and a wide range
of musical sounds. The built in quality of a Fender
amplifier is the result of over four decades of dedication in the combined skills of research and development by our engineers and musicians.
That is why we proudly say...FENDER, The Sound
That Creates Legends
Page 3
Pro Junior front panel functions
A. Power Switch – This switch turns the AC power
ON and OFF. When the switch is OFF, the amplifier
is completely shut down.
B. Power Indicator – When the indicator is illuminated the Pro Junior is receiving power.
Pro Junior rear panel
F. Speaker Connector – This jack provides a con-
nection for the internal speaker. An Eight Ohm
external speaker cabinet may be used instead of the
internal speaker.
WARNING: NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
PERSONNEL ONLY.
C. Tone – Adjusts the amount of boost or cut in the
upper mids and highs.
D. Volume – Adjusts the overall loudness of the
amplifier.
E. Input – A high impedance, high sensitivity plug-in
connection for instruments.
Page 4
Pro Junior specifications
PART NUMBER: 120V VERSION:21-3103
INPUT IMPEDANCE: Greater than 1 Meg Ohm
NOMINAL INPUT LEVEL: 100mV
POWER OUTPUT: 15 Watts R.M.S. at 8 Ohms
RATED LOAD IMPEDANCE: 8 Ohms
POWER REQUIREMENTS: 120V VERSION:120 VAC 60 Hz., .6A Max.
SPEAKER COMPLEMENT: One 8 Ohm 10” Fender Special Design Speaker
DIMENSIONS: Height: 14.5” (36.8 cm)
WEIGHT: 20 lbs. (9.1 kg)
230V VERSION:21-3163
230V VERSION:230 VAC 50 Hz., .3A Max.
Width: 15” (38.1 cm)
Depth: 8.75” (22.2 cm)
SOUND:
Hot, Bluesy, Incredible!
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORP.,
CORONA, CA 91720
Loading...