Fellowes Powershred Performance Oil MSDS

SECTION 1: COMPANY AND PRODUCT IDENTIFICATION
Fellowes, Aus Pty Ltd.
79-81 South Centre Rd. Melbourne Airport Business Park
Australia
Telephone: +61383369700 Fax: +61393301242
Product Name: Description:
35250 Fellowes Powershred Shredder Lubricant Lubricant
SECTION 2: HAZARD IDENTIFICATION
Inhalation: Eyes: Skin: Ingestion:
May cause slight irritation. May cause slight irritation. May cause slight irritation. May cause gastrointestinal discomfort.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name: CAS No. EINECS No. Maximum Weight :
Canola Oil 120962-03-0
>99%
SECTION 4: FIRST AID MEASURES
Inhalation: Eyes: Skin: Ingestion:
Move to fresh air. Flush with water. Wash with soap and water. Do not induce vomiting. Seek medical attention.
SECTION 5: FIREFIGHTING MEASURES
Flash Point: Flammability Limits in Air by volume: Extinguishing Media: Special Firefighting
Measures:
Unusual Hazards:
>500F (260C) Closed Cup
Lower:
Not explosive
Upper:
Not explosive Do not use water jet. Use dry chemical, halon, carbon dioxode, water spray, fog, or foam. None
None
Fellowes, Inc. www.fellowes.com
Page 1 of 3
SECTION 6: ACCIDENTAL RELEASE MEASURES
Use absorbent material and dispose of appropriately. For large spills, keep product out of sewers and advise authorities if product has entered sewers. Surfaces may become slippery after spillage.
SECTION 7: HANDLING AND STORAGE
Handling: Storage:
Keep away from heat and sources of ignition. Do not store near heat or flame. Store away from strong oxidizers.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Eyes and Face: Clothing: Respiratory: Ventilation:
None necessary when product is used as intended. No special protective clothing when used as intended. None necessary when product is used as intended. Normal ventilation is adequate.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Boiling Point: Evaporation Rate: Specific Gravity: Solubility in Water: Appearance/Odor:
>575F Not available
0.92 g/ml (7.67 lb/gal) @ 25C Not soluble Yellow to amber liquid; faint fatty odor.
SECTION 10: STABILITY AND REACTIVITY
Stable: Conditions to Avoid: Chemical Incompatibility: Hazardous Decomposition: Polymerization:
Stable under normal conditions. Keep away from heat and open flame. Avoid strong oxidizing agents. Strong oxidizers Combustion produces carbon monoxide, carbon dioxide, along with thick smoke. Will not occur
SECTION 11: TOXICOLOGICAL INFORMATION
Not listed on NTP, OSHA, or IARC.
Fellowes, Inc. www.fellowes.com
Page 2 of 3
Loading...
+ 1 hidden pages