Model: FS 3 FS 3+
FS 5 FS 5+
S5
®
Powershred
®
Personal Series
Operating Instructions
Mode d’emploi
Instrucciones de funcionamiento
Bedienungsanleitung
Bedieningsinstructies
Istruzioni sul funzionamento
®
2
Safety Instructions
• Read and save these instructions.
• Follow all warnings and instructions marked on the product.
• Always turn off and unplug the machine before moving,
cleaning or any other conduct other than normal operation.
Serious injury may result.
• Shredder should never be placed near or over a radiator, heat
register or water.
• Operate shredder from the power source indicated on the serial
label or power supply. If you are not sure of the type of power
available, consult your dealer or a power company.
• Do not rest anything on the power cord. Do not place machine
where persons may walk on the cord.
• If an extension cord is used, make sure that the total ampere
ratings of the products plugged into the extension cord do not
exceed the extension cord ampere rating and that the total of
all products plugged into the wall outlet does not exceed 15
amperes.
• Power cord should be easily accessible because it serves as the
disconnect switch.
• Do not service this product yourself. An opened cover may
expose you to dangerous voltage points or other risks, and will
void manufacturer’s warranty.
• Keep loose objects (jewelry, ties, long hair) away from
shredder.
• CAUTION: Do not insert aerosol cleaners or lubricants into or
around the machine. Some agents may combust, causing
serious injury.
• If your shredder does not come with a wastebasket, make
certain the basket selected provides a stable base for the
shredder. High, narrow baskets may create an unstable, top
heavy environment.
• Empty wastebasket frequently.
• Do not exceed recommended sheet capacity or usage. (See
Specifications
).
• Do not shred continuous forms.
• Do not shred labels, transparencies, glossy paper, newsprint,
plastic or cardboard.
• This compact shredder is intended for paper only. Do not
attempt to shred paper clips and other hard materials as
damage to the cutting system may result.
• Keep out of the reach of children and pets.
• Never insert your hand or fingers into feed opening.
• This shredder should be operated only with an operator in
attendance.
Installation
• Position shredder over basket and extend adjustable arm
(Figure A) so shredder solidly rests on basket edges (Figure B).
• With shredder positioned on basket, plug into outlet. Do not
alter the plug.
Operation
Prepare paper to be shredded.
Remove staples and paper clips and
make sure to feed no more than the
recommended sheet capacity at one
time.
• Slide the main switch to the
(
I
)position to activate the
standby mode.
•The shredder automatically
STARTS
when paper is placed in entry and
STOPS
when
finished shredding.
Overload Protection
This shredder is protected by a built-in thermal overload device that serves
to protect the motor from overuse. When continuous shredding is
conducted for an extended period of time, the shredder will automatically
turn itself off to cool down. When shredding is automatically stopped,
allow the unit to stand for about 30 minutes before using it again.
Important Note
This paper shredder is not intended to shred high volumes of paper.
Please refer to the
Specifications
for the recommended daily usage
and sheet capacity of this shredder. Please note that if the paper is wider
than the entry, and you fold it to fit, the paper thickness increases and the
recommended capacity may be exceeded.
If a Jam Occurs
1. Immediately return power switch to OFF (
O
) position.
2. Depress power switch to the REVERSE (
R
) position until the
jammed paper has been fully removed from the cutter.
3. DO NOT PULL ON PAPER. Damage to the drive system could
occur.
4. If the machine jams in reverse, unplug the unit and cut all
excess paper off the top and bottom of the machine before
repeating the jam-clearing procedure.
5. Shred smaller quantities. See
Specifications
.
Figure A
Figure B
®
3
Specifications
Without Basket With Basket
FS3 FS5 FS3+ FS5+ S5
Sheet Capacity 3 5 3 5 5
20# (74gsm)/DIN A4, 70 g/m
2
Entry Width 9”/230mm
Shred Size 1/4”/7mm
Shredding Speed 14 fpm/4.2 mpm
Recommended Daily Usage 30 sheets
Power Source 120V/60Hz (North America)
230-240V/50Hz (Europe)
Dimensions (HxWxD) 5-3/4” x 13-11/16” x 3-3/8” 14-1/4” x 13” x 8-1/4”
146 x 348 x 86 mm 362 x 330 x 210 mm
Overload Protection
This shredder is protected by a built-in thermal overload device that serves to protect
the motor from overuse. When continuous shredding is conducted for an extended
period of time, the shredder will automatically turn itself off to cool down. When
shredding is automatically stopped, allow the unit to stand for about 30 minutes
before using it again.
Important Note
This paper shredder is not intended to shred high volumes of paper. Please refer to
the specifications for the recommended daily usage and sheet capacity of this
shredder. Please note that if the paper is wider than the entry, and you fold it to fit,
the paper thickness increases and the recommended capacity may be exceeded.
Limited Warranty
Fellowes Manufacturing Company warrants the cutting cylinders of all
Fellowes shredders to be free from defects in material and workmanship
for 1 year from the date of purchase by the original consumer. Fellowes
warrants all other parts of the machine to be free of defects in material
and workmanship for 1 year from the date of purchase by the original
consumer. If any part is found to be defective during the warrant period,
your sole and exclusive remedy will be repair or replacement, at Fellowes’
option and expense, of the defective part.
This warranty does not apply in cases of abuse, mishandling or
unauthorized repair. ANY IMPLIED WARRANTY, INCLUDING THAT OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY
LIMITED IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET
FORTH ABOVE. In no event shall Fellowes be liable for any consequential
or incidental damages attributable to this product. This warranty gives you
specific legal rights. You may have other legal rights that vary from state
to state.
For more detail or to obtain service under this warranty, please contact
Fellowes Customer Service at 1-800-955-0959, Monday through Friday, 8
AM - 5 PM (Central Standard Time).
For specific instructions on obtaining service under this warranty on
machines purchased outside the USA, contact the appropriate location
listed in the
Contact for Service
section of this instruction manual.
Warrantor: Fellowes Manufacturing Company.
Declaration of Conformity
Fellowes Manufacturing Company
Doncaster Road, Kirk Sandall • Doncaster, South Yorkshire, DN31H
England
declares that the product Models FS3, FS3+, FS5, FS5+
conforms with the requirements of the Low Voltage Directive (73/23
EEC) and the Electromagnetic Compatibility Directive (89/336 EEC) and
the following harmonized European Normes (EN Standards) and IEC
Standards.
Safety: EN60950 ‘Information Technology Equipment’
EMC: Performance
Standar
d Severity Level Criteria
EN 55014-2:1997 Categpry Level NA
EN 55104-1:1993 NA
+A1:1997
EN 61000-3-2:1995 Class A NA
EN 61000-3-3:1995 Section 6.1 (FS3) NA
EN 61000-3-3:1995 Section 5 (FS5) NA
Itasca, Illinois, USA _____________________
March, 2000 Anthony Storrie
Australia Benelux Canada France Germany Italy Japan Poland United Kingdom
Tullamarine, Vic Vianen, NL Markham, Ont. Rennes, I-V Garbsen, Han. Camerano, AN Tokyo Warsaw Doncaster, S. Yorks.
®
1789 Norwood Avenue • Itasca, Illinois 60143-1095
630-893-1600 • Customer Service 1-800-955-0959
http://www.fellowes.com
© 2000 Fellowes Printed in China. Part #32068
Contact For Service
Vos Contacts Fellowes
Sus Contactos Fellowes
Ihr Fellowes Kontakt
Uw Fellowes Contacten
Vostri Contatti Fellowes
United States 1-800-955-0959
Australia (In Melbourne) (03) 9330-3211
(Outside Melbourne) 1-800-331-177
Canada 1-800-665-4339
United Kingdom 01302-885 331
Japan +81-3-5496-2401
Benelux +31-(0)347-377988
Italy +39-071730041
Germany +49-5131-49770
France +33-(0)4-72-08-25-45
Loading...