Page 1
APPLICATIONS
Designed for the optimal low frequencies extension in the
MODUS active line array system
Permanent installations in Theatres, Concert Halls, Clubs,
Places of Worship, Conference Rooms, Indoor Sports,
Arenas & Stadiums
Sound reinforcement for live events: Touring, Bands,
Orchestras, Conference both indoors and out, where
uniform sound pressure level is required over the entire
listening area
KEY FEATURES
Powered subwoofer in bandpass push-pull
0.70” birch plywood enclosure with textured scratch
resistant paint finish
2 x 15” B&C neodymium woofers with 4” voice coil
Class D amplifier delivering 2000W RMS
SPL capability 146dB half space
DSP with 6 eq. presets cardioid configurations
User friendly built-in hardware manufactured with the
highest safety standards
Can either be suspended above the line array modules or
ground stacked
Optional flying bar and trolley for transport
Completely Manufactured in Italy
215 FSA
PRODUCT DESCRIPTION
The FBT MODUS 215FSA powered subwoofer meet the following performance criteria: frequency response of 33Hz to
100Hz, peak output of 146dB half-space, input impedance 22 kOhm . FBT MODUS 215FSA is of bandpass design
incorporating 2x15” B&C neodymium woofers with 4” voice coil. High efficiency internal amplifier 2000W in “D” Class
with switch mode power supply and built in DSP signal processor with 6 eq. presets cardioid configurations. All
components are mounted in a 0,70" birch plywood enclosure with a resistant black textured finish.The rear facing input
panel provides XLR signal input and link, level control, preset, delay , phase 0°-180° switch, diagnostic led, power
supply with Neutrik powercon cable duplex with input and output. The FBT MODUS 215FSA can be suspended above
the line array modules or ground stacked.
ELECTRONIC SPECIFICATIONS PHYSICAL SPECIFICATIONS
System Type
Built-in Amplifier max.
Built-in Amplifier peak
Frequency Response
Max. SPL cont / peak
Dispersion
Input Impedance
AC Power Requirement
Bandpass
2000W RMS
4000W
33Hz - 100Hz
140 / 146dB
Omnidirectional
22kOhm
1840VA
Low Frequency Woofer
Input Connectors
Net Dimensions (WxHxD)
Shipping Dimensions (WxHxD)
Net Weight
Shipping Weight
Enclosure Material
Power Cord
2 x 15" / 4" coil
XLR with loop
28,66" x 28,07" x 32,91"
30,11" x 29,52" x 34,44"
31,29" x 43,30" x 35,62" (with pallet)
208,33lbs
231,48 (with pallet)
birch plywood
16,4ft
Page 2
CONNECTION PANEL
215 FSA
MODUS
215FSA
Processed Active Subwoofer
LMT / PRT
PEAK
ON
0° 180°
0
0
+6
dB
0
5
4
6
3
2
PRESET
1
2.5
1.5
1
3.5
mt.
0.5
0
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
Power Consumption 1840VA
PHASE
LEVEL
DELAY
1 FRONT
2 FRONT
Cardioid rear:
ORIGINAL
PUNCH
INFRA
HUNG
Normal or
cardioid front:
LINK
IN
RIGHT
LINK
IN
LEFT
28,66inch
28,07inch32,91inch
DIMENSIONAL
DRAWING
MADE IN IT
Y
AL
MD-F SUB
AC LOOP OUT
AC INPUT
220-230V
220-230V
50/60Hz
50/60Hz
8A max
8A max
DO NOT EXCEED RA
TED MAX CURRENT
DRAW FROM AC LOOP OUTPUT CONNECTOR
ACCESSORIES
Flying bar
MODUS 4805LA / MODUS 4820LA
on MODUS 215FSA
Trolley for 2 MODUS 215FSA
MD-WB
Stand base to tilt
MD-T SUB
Loading...