Fantech AC 3600, AC 4800 Installation And Operation Manual

Installation and Operation Manual
AC 3600 & AC 4800
Air Curtains
Item #: 204407
Rev Date: 2016-07-14
Techical / Customer Support:
United States Tel.: 800.747.1762 Canada Tel.: 800.565.3548
D
Note Warning /
Information Technical
Important
note
Read and Save these instructions for future reference.
The Air Curtain is designed for horizontal, fixed installations. The low height of the appliance and front inlet also makes it possible to be mounted close to the ceiling. This saves space and enables the Air Curtain to be used in places where there is not much room between door and ceiling.
NOTE: Air pressure imbalance between rooms separated by an air
curtain, crosswinds, or strong drafts may cause a considerable reduction of the efficiency of the Air Curtain. The ventilation of the premises should consequently be balanced
CAUTION: To reduce the risk of injury to persons, install fan at least 7 ft
above the floor.
CAUTION: Before servicing or cleaning unit remove plug from receptacle.
CAUTION: For general ventilating use only. Do not use to exhaust hazard-
ous or explosive materials and vapors.
Practical tip
information
Dimensions
H
L
C
BA
Model A B C D H L
AC 3600 3 3/430 1/48 1/28 1/29 1/436
AC 4800 3 3/442 1/28 1/28 1/29 1/448
Dimensional information is in inches.
Warnings
1. To reduce the risk of electric shock, do not expose to water or rain.
2. To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
Installation guidelines
1. Locate the door or opening in which you plan to mount your Air Curtain.
2. Locate the center of door or opening using the referenced dimensional on the following page. Note: Mounting brackets are not centered on unit.
3. Mount brackets to structure using the appropriate fasteners for the surface being mounted to.
4. Screw the bolt w/rubber stopper into the back bottom corner.
5. Lift unit to brackets and secure with hardware provided
6. Unit is provided with a 3-prong cord. Note: Make sure cord is secured to structure to prevent any sagging.
fantech
Mounting unit to brackets on wall
Hardware to mount the unit to brackets is included into the kit. Hardware to mount the brackets to the wall or ceiling structure is not included into the kit. Please use appropriate fasteners for mounting of bracket to structure .
Loading...
+ 2 hidden pages