An obvious quality choice, the AISI 304 steel has
always distinguished Falmec hoods. A high quality
material, it is the only steel that is truly stainless due
to its nickel content.
Steel Fasteel
No fingerprints technology. The patented imprintproof Fasteel is steel that does not leave fingerprints
or streaks. The result is a material that is very easy
to clean.
“Brillant” Steel
A special process is used to obtain a brilliant finish
from the AISI 304. This finishing touch allows the
steel to become mirror-like, emphasizing product
appearance and shape.
Halogen “Easy Open”
The halogen lighting distinguishes itself with its
square shape that combines well with modern
hoods. The front opening makes it simple to replace
the internal light bulb.
Lighting LED
The new LED lights bring together suitable lighting,
low energy consumption levels, and longevity.
Filters TOP
Stainless steel filters with five aluminium layers for a
higher level of efficiency over time. It is safe to wash
them in the dishwasher.
FASTEEL
LUX 55
MIRA TOP 56
PLANE TOP 57
ALTAIR 54
RIALTO 58
Falmec offers a wide variety
of blowers for every need. In
CFM
addition to efficiency, special
attention is given to noise
reduction to enhance the comfort
of your kitchen.
CFM
Perimeter suction
Using a special perimeter aspiration system, motor
capacity is concentrated within a limited space; this
increases air pressure and provides a much better
distribution of aspiration. All hoods with perimeter
aspiration are equipped with sound-absorbing
panels.
E-MOTION
E-motion conceals a sophisticated automation
that makes the appliance easier to use and grants
the maximum efficiency and the best performance.
24h FUNCTION
The 24h function allows you to refresh the air
inside the kitchen for better overall indoor air
quality. Once activated the hood works at a lower
speed for one hour and then it stops for the
following three hours. This cycle continues until
inactivated and it is useful on the suction hood
version.
®
NRS
NRS® technology makes the range hood
absolutely silent, ensuring optimal comfort in the
kitchen. This enhancement does not affect motor
capacities and air flow.
600
CFM
1000
CFM
4
4
JUST FALMEC...
ONLY RANGE HOODS FOR THE LAST 30 YEARS
Falmec ventilation products are a reection of workmanship that is of exceptional quality
and truly focused on detail. From the beginning, Falmec has chosen to focus exclusively
on ventilation products, thereby dedicating technological know-how into this specialized
category. For this reason, Falmec hoods offer the absolute highest levels of design, functionality,
and durability. We are condent our products will effectively remove cooking odours and
vapours to provide a clean air environment. In addition to providing this important function,
Falmec hoods will also complement your kitchen by offering a wide variety of contemporary
and stylish designs.
6
MADE IN ITALY
6
JUST ITALIAN...
COMPLETELY MADE IN ITALY
Falmec is WINNER 2010 for RIALTO and PRESTIGE design
Falmec is WINNER 2010 for MIRABILIA MANHATTAN design
Falmec hoods are entirely designed and manufactured in Italy. With 130 employees, all
processing phases take place at the modern Vittorio Veneto (Treviso) company. The plants
are equipped with state-of-the-art equipment utilizing numerous robotic production lines to
ensure the highest quality standard.
From laser cutting, automated bending, welding and painting to the nal assembly of
motors and electronics, each production phase is carefully carried out. As a result of this
commitment and passion, outstanding products are created, satisfying the needs of even the
most discerning customers.
8
8
JUST 304...
USING ONLY THE BEST STEEL
BRILLANT
STEEL
When manufacturing a premium line of hoods, the choice of materials obviously plays a
fundamental role. For all Design hoods, Falmec uses AISI 304 stainless steel, made of an 18%
chrome and 8% nickel alloy. Hygienic, easy to clean, and extremely resistant to corrosion,
AISI 304 is without a doubt the best material to be used in a kitchen environment. Falmec also
utilizes exclusive Fasteel imprint-proof stainless steel which is a contributing factor in making
Falmec hoods unique. Thanks to this innovative ”no ngerprint technology,” the surface
always retains its beautiful luster and will remain free of blemishes.
In an effort to provide quality design and value to our customers Falmec also utilizes AISI
403 in the production of the Potenza and Insert product lines. This stainless steel is most
commonly used in the luxury appliance industry and provides a beautiful nish for a lifetime
To Falmec the word “quality” has many different meanings, all of equal importance.
First of all, it means manufacturing hoods that satisfy the senses: efcient extraction,
beautiful design, and noise reduction.
But, to Falmec, “quality” also means offering a sales network and service in 40
countries worldwide, because it’s not just our products but also our service that must
meet and exceed customers’ expectations. Through the synergy between knowledge,
constant innovation and attention to the client, Falmec combines the skills needed to
guarantee the perfect range hood in terms of functionality and elegance.
10
10
JUST SILENCE...
NOISE REDUCTION SYSTEM
Since its establishment, Falmec has been sensitive to the enviroment. We looked for a
responsible and respectful way to reconcile production with attention to resources, market
and desirability.
®
Falmec collaborated with specialized laboratories to develop the new NRS
System) project. Through studies of uid dynamics and the application of damping material
we have achieved unimaginable results.
In particular, the study of uid dynamics, performed with a highly innovative software program,
was applied to the hood and its exhaust system. It has enabled us to achieve an optimization
of reduced air ow turbulence, thereby eliminating any type of resistance, the main cause of
operational noise.
A range hood is 86% quieter with the new Falmec system: only 42 decibels at 315 CFM.
Also, the use of new materials that have been designed to contain the natural noise produced
by the mere movement of air, have allowed us to achieve further noise reductions for a quieter
kitchen.
Thanks to the NRS
IN THE WORLD.
®
System, we can lay claim to having one of the QUIETEST RANGE HOODS
®
(Noise Reduction
®
NRS
collection
LUMINA 14
HORIZON 16
PLANE 18
GRUPPO INCASSO 19
14
max 43 1/12
"
-
1095
20 5/6
"
-
530
2 3/16"
55
35 1/2"- 900
18 11/12
" -
480
11 3/4
"
- 300
14
" -
355
BRILLANT
STEEL
max 48 3/4" - 1230
23 3/4" - 600
2 3/16" - 55
35 1/2" - 900
15 1/4" - 387
12 3/16" - 310
23 3/8" -585
14
LUMINA NRS
®
500
CFM
Scotch Brite stainless steel (AISI 304)
NRS® technology for a quieter kitchen
Perimeter asperation
Metallic grease filter, removable and washable
Touch control + 24h function
White fluorescent ambient light
Tempered glass: white version
Optional charcoal filter
-82%
reduction of sound
Motor speed
Noise
I.E.C.60704-2-13
dB (A) re 1pW
Capacity CFM
con I.E.C. 61591
Normalized pipes
Maximum pressure(Pa)
Power (W)
1234
33384351
220345490690
190310410520
95110145220
500 CFM
Wall 36" - 90 cm
Motor and control 500 CFM
4 spd Touch control
Filters “Base” 274x274 mm
High performance filters 101078900
Lighting: Fluorescent 1 x 21 W
Minimum distance from cooktop 65 cm
FNLUM36W5SS Lumina NRS
Available optional accessories: Wall/Island chimney extension - Magic Steel protective and cleaning wipe.
®
Wall 36" 500 CFM
Island 36" - 90 cm
Motor and control 500 CFM
4 spd Touch control
Filters “Base” 274x274 mm
High performance filters 101078900
Lighting: Fluorescent 2 x 21 W
Minimum distance from cooktop 65 cm
FNLUM36I5SS Lumina NRS
®
Island 36" 500 CFM
16
BRILLANT
STEEL
16
HORIZON NRS
®
1000
CFM
Scotch Brite stainless steel (AISI 304)
NRS® technology for a quieter kitchen
Perimeter asperation with sound-absorbing panel
Metallic grease filter, removable and washable
Touch control + 24h function
Tempered glass
Optional charcoal filter
Motor speed
Noise
I.E.C.60704-2-13
dB (A) re 1pW
Capacity CFM
con I.E.C. 61591
Normalized pipes
Maximum pressure(Pa)
Power (W)
1234
36414754
440690980 1380
190310410520
95X2 110X2 145X2 220X2
1000 CFM
-73%
reduction of sound
Island 60" - 150 cm
Motor and control 2x500 CFM
4 spd Touch control
Filters “Base” 274x274 mm
High performance filters 101078900
Lighting: Fluorescent 4 x 13 W
Minimum distance from cooktop 62 cm
FNHRZ60W5SS Horizon NRS
Available optional accessories: Wall/Island chimney extension - Magic Steel protective and cleaning wipe.
®
Island 60" 2x500 CFM
max 50" - 1270
23 3/4" -600
100
25 9/16" - 650
15 1/4" -
387
12 3/16" - 310
35 3/8" - 900
59 1/16" - 1500
18
BRILLANT
STEEL
BRILLANT
STEEL
PLANE NRS
Scotch Brite stainless steel (AISI 304)
NRS® technology for a quieter kitchen
Top filters removable and washable
Electronic control
Optional charcoal filter
®
500
CFM
-85%
reduction of sound
Motor speed
Noise
I.E.C.60704-2-13
dB (A) re 1pW
Capacity CFM
con I.E.C. 61591
Normalized pipes
Maximum pressure(Pa)
Power (W)
1234
33384250
220360490710
190310410520
95110145220
500 CFM
GRUPPO INCASSO NRS
®
Scotch Brite stainless steel (AISI 304)
NRS® technology for a quieter kitchen
Top filters removable and washable
Electronic control
LED lighting
Optional charcoal filter
Remote control included
500
CFM
Wall 36" - 90 cm
Motor and control
Filters
High performance filters
Lighting: Halogen
Minimum distance from cooktop
11 3/4"
-
14" -355
max 43 1/4" -1100
21" -530
19 1/4" - 490
300
35 3/8"
900
-
FNPLS36W5SS Plane NRS
Available optional accessories: Wall/Island chimney extension - Magic Steel protective and cleaning wipe.
Scotch Brite stainless steel (AISI 304)
Top filters removable and washable
Touch control + 24h function
Tempered glass: black or white version
Decorative front panels with automatic opening system
LED lighting
Wall 36" - 90 cm
Motors and control 500 CFM
4 spd Touch Control
Filters “Top ”
charcoal: 6
Lighting: LED lamp 4x1 W
Minimum distance from cooktop 60 cm
200
7 7/8"
13 3/4" - 350
13 3/4" - 350
Remote control optional (cod. 105080050)
white glassblack glass
Island 36" - 90 cm
Motors and control 500 CFM
4 spd Touch Control
Filters “Top ”
charcoal: 6
Lighting: LED lamp 4x1 W
Minimum distance from cooktop 61 cm
10 1/2"
268
13 3/4" - 350
17 1/2" - 445
15 3/4" - 400
15 1/2" - 390
187
7 1/4"
35 3/8" - 900
FDBWH36W5SG Butterfly Wall 36" White 500 CFM
FDBBK36W5SG Butterfly Wall 36" Black 500 CFM
Available optional accessories: Under-roof extractor fan - Outdoor extractor fan - Island chimney extension - Magic Steel protective and cleaning wipe
max 7 1/16"
Automatic opening
42 1/2" - 1080 ÷ 52 1/4" - 1330
15 3/4" - 400 14" - 355
7 1/4"
187
FDBWH36I5SG Butterfly Island 36" White 500 CFM
FDBBK36I5SG Butterfly Island 36" Black 500 CFM
max 24 3/4" - 625
Automatic opening
35 3/8" - 900
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.