T-100 (3 mm)
SOLID STATE LAMPS
.047 (1.2)
.032 (.08)
.189 (4.8)
.165 (4.2)
.059 (1.5)
.035 (0.9)
1.040 (26.4)
MIN
(ANODE)
.040 (1.00)
MIN
.100 (2.54)
.122 (3.1)
.106 (2.7)
.137 (3.48)
.113 (2.88)
DIA
.020 (.51)
.016 (.41)
2X
.018 (.46)
.012 (.30)
2X
PACKAGE DIMENSIONS
PURE GREEN HLMP-K600 TINTED
PURE GREEN HLMP-K640 CLEAR
SOFT ORANGE HLMP-K400 TINTED
SOFT ORANGE HLMP-K401 TINTED
SOFT ORANGE HLMP-K402 TINTED
DESCRIPTION
These T-100 LEDs are widely used as general
purpose indicators. The pure green lamps is
made with a GaP LED on a GaP substrate. The
soft orange is made with a GaAsP LED on a GaP substrate. They
are encapsulated in epoxy packages and are designed to provide
superior light output and a wide viewing angle.
FEATURES
• Popular T-100 package
• Low drive current
• Solid state reliability
• Wide viewing angle
• Choice of pure green or soft orange colors
Parameter GREEN ORANGE UNITS
Power Dissipation 110 110 mW
Forward Current 40 40 mA
Peak Forward Current (f=1kHz, DF=10%) 200 200 mA
Lead Soldering Time at 260° C 5 5 sec
Operating Temperature -40 to +100 -40 to +100 °C
Storage Temperature -40 to +100 -40 to +100 °C
ABSOLUTE MAXIMUM RATING
(TA =25°C)
NOTES:
1. ALL DIMENSIONS ARE IN INCHES (mm).
2. LEAD SPACING IS MEASURED WHERE THE LEADS
EMERGE FROM THE PACKAGE.
3. PROTRUDED RESIN UNDER THE FLANGE IS 1.5 mm (.059)
MAX.
2001 Fairchild Semiconductor Corporation
DS300014 2/27/01 1 OF 4 www.fairchildsemi.com
Part Number HLMP-K600 HLMP-K640* HLMP-K400 HLMP-K401 HLMP-K402 Condition
Luminous Intensity (mcd) IF= 10mA
Minimum 1.0 4.0 1.0 2.0 3.0
Typical 4.5 15.0 4.0 5.0 7.0
Forward Voltage (V) IF= 10mA
Maximum 2.7 3.0 2.4 2.4 2.4
Typical 2.1 2.2 1.9 1.9 1,9
Peak Wavelength (nm) 555 555 612 612 612 IF= 10mA
Spectral Line Half Width (nm) 24 24 40 40 40 IF= 10mA
Reverse Voltage (V) 5 5 5 5 5 IR= 100µA
Viewing Angle (°) 90 45 90 90 90 IF= 10mA
ELECTRICAL / OPTICAL CHARACTERISTICS
(TA =25°C)
* HLMP-K640 test condition is IF= 20mA
T-100 (3 mm)
SOLID STATE LAMPS
www.fairchildsemi.com 2 OF 4 2/27/01 DS300014