SOLID STATE LED LAMPS
SUBMINIATURE T-1 3/4 (1.9mm)
1 of 4 4/4/00 300049A
PACKAGE DIMENSIONS
FEATURES
• Subminiature package
• Low profile package
• Three lead bend options for
surface mounting
• Available in tape and reel
NOTE:
Dimensions are in inches (mm).
AlGaAs RED HLMP-Q106A Clear
AllnGaP ORANGE HLMA-QH00A Clear
AllnGaP YELLOW HLMA-QL00A Clear
DESCRIPTION
These subminiature LED lamps are intended for high volume,
low cost status indication on PCBs, as well as for backlighting
keyboards and switches. Choices of “Yoke”, “Z-Bend” or “GullWing” lead bends are available.
Parameter
AlGaAs Red AllnGaP Orange AllnGaP Yellow
Units
HLMP-Q106A HLMA-QH00A HLMA-QL00A
Continuous Forward Current - I
F
50 50 50 mA
Peak Forward Current - I
F
200 100 100 mA
(f = 1.0 KHz, Duty Factor = 1/10)
Reverse Voltage - VR (IR = 10 µA) 5 5 5 V
Power Dissipation - P
D
100 120 120 mW
Operating Temperature - T
OPR
-40 to +100 °C
Storage Temperature - T
STG
-40 to +100 °C
Lead Soldering Time - T
SOL
Wave 260 for 5 sec °C
Reflow 260 for 10 sec
ABSOLUTE MAXIMUM RATINGS
(TA= 25°C unless otherwise specified)
Part Number
AlGaAs Red AllnGaP Orange AllnGaP Yellow
Condition
HLMP-Q106A HLMA-QH00A HLMA-QL00A
Luminous Intensity (mcd) IF= 20mA
Minimum 50 150 150
Typical 500 500 500
Forward Voltage (V) IF= 20mA
Maximum 2.4 2.4 2.4
Typical 1.9 1.9 1.9
Peak Wavelength (nm) 660 620 590 IF= 20mA
Spectral Line Half Width (nm) 20 18 15 IF= 20mA
Viewing Angle (°) 25 25 25 IF= 20mA
ELECTRICAL / OPTICAL CHARACTERISTICS
(TA =25°C)