Fairchild Semiconductor DM74ALS1240AWMX, DM74ALS1240AWM Datasheet
© 2000 Fairchild Semiconductor Corporation DS006261 www.fairchildsemi.com
September 1986
Revised February 2000
DM74ALS1240A Octal 3-STATE Bus Driver
DM74ALS1240A
Octal 3-STATE Bus Driver
General Description
These octal 3-STATE bus drivers are designed to provide
the designer with flexibility in implementing a bus interface
with memory, microprocessor, or communication systems,
and are low power dissipation versions of the
DM74ALS240A and DM74ALS241A. The output 3-STATE
gating control is organized into two separate groups of four
buffers. The DM74ALS1240A control inputs symmetrically
enable the respective outp uts when set l ogic LOW. The 3STATE circuitry contains a feature that maintains the buffer
outputs in 3-STATE (high impedance state) during pow er
supply ramp-up or ramp-d own. This eliminates bus gli tching problems that arise during power-up and power-down.
Features
■ Advanced oxide-isolated, ion-implanted Schottky TTL
process
■ Switching response specified into 500Ω and 50 pF load
■ Switching response specific ations guaranteed over full
temperat ure and V
CC
supply range
■ PNP input design reduces input loading
■ Low power dissipation version
■ Low level drive current: 74ALS = 16 mA
Ordering Code:
Devices also availab le in Tape and Reel. Specify by appending th e s uffix let t er “X” to the ordering code.
Connection Diagram
Function Table
H = HIGH Level Logic State
L = LOW Level Logic State
X = Don't Care (Either LOW or HIGH Level Logic State)
Z = High Impedance (OFF) State
Logic Diagram
Order Number Package Number Package Description
DM74ALS1240AWM M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide
Input Output
G
AY
LLH
LHL
HXZ
www.fairchildsemi.com 2
DM74ALS1240A
Absolute Maximum Ratings(Note 1)
Note 1: The “Absolute Maximum Ratings” are those values beyond which
the safety of the dev ice cannot be guaranteed. T he device sh ould not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum ratings.
The “Recommend ed O peratin g Cond itions” t able w ill defin e the co ndition s
for actual device operation.
Recommended Operating Conditions
Electrical Characteristics
over recommended operating free air temperature range (unless otherwise specified)
Supply Voltage 7V
Input Voltage 7V
Voltage Applied to Disabled Output 5.5V
Operating Free Air Temperature Range 0°C to +70°C
Storage Temperature Range −65°C to +150°C
Typical θ
JA
N Package 60.5°C/W
M Package 78.0°C/W
Symbol Parameter Min Typ Max Units
V
CC
Supply Voltage 4.5 5 5.5 V
V
IH
HIGH Level Input Voltage 2 V
V
IL
LOW Level Input Voltage 0.8 V
I
OH
HIGH Level Output Current −15 mA
I
OL
LOW Level Output Current 16 mA
T
A
Operating Free Air Temperature 0 70 °C
Symbol Parameter Conditions Min Typ Max Units
V
IK
Input Clamp Voltage VCC = 4.5V, II = −18 mA −1.2 V
V
OH
HIGH Level VCC = 4.5V to 5.5V IOH = −0.4 mA VCC − 2V
Output Voltage VCC = 4.5V IOH = −3 mA 2.4 V
IOH = Max 2 V
V
OL
LOW Level VCC = 4.5V IOL = 12 mA 0.25 0.4 V
Output Voltage IOL = 24 mA 0.35 0.5 V
I
I
Input Current at Maximum
VCC = 5.5V, VI = 7V 0.1 mA
Input Voltage
I
IH
HIGH Level Input Current VCC = 5.5V, VI = 2.7V 20 µA
I
IL
LOW Level Input Current VCC = 5.5V, VIL = 0.4V −0.1 mA
I
O
Output Drive Current VCC = 5.5V, VO = 2.25V −30 −112 mA
I
OZH
HIGH Level 3-STATE
VCC = 5.5V, VO = 2.7V 20 µA
Output Current
I
OZL
LOW Level 3-STATE
VCC = 5.5V, VO = 0.4V −20 µA
Output Current
I
CC
Supply Current
VCC = 5.5V
Outputs HIGH 5 8 mA
Outputs LOW 8 14 mA
Outputs 3-STATE 8 13 mA
Loading...