Fairchild Semiconductor 1.5KE91CA, 1.5KE91A, 1.5KE82A, 1.5KE82CA, 1.5KE75A Datasheet
...
1.5KE6.8(C)A - 1.5KE440(C)A
Features
• Glass passivated junction.
• 1500W Peak Pulse Power capability
at 1.0 ms.
• Excellent clamping capability.
• Low incremental surge resistance.
• Fast response time; typically less
than 1.0 ps from 0 volts to BV for
unidirectional and 5.0 ns for
bidirectional.
• Typical I
less than 1.0 µA above 10V .
R
DO-201AE
COLOR BAND DENOTES CATHODE
Discrete POWER & Signal
Technologies
1.0 min (25.4)
Dimensions in
inches (mm)
0.375 (9.525)
0.265 (6.731)
0.210 (5.334)
0.188 (4.775)
0.042 (1.067)
0.037 (0.940)
1.5KE6.8(C)A - 1.5KE440(C)A
DEVICES FOR BIPOLAR APPLICA TIONS
- Bidirectional types use CA suffix.
- Electrical Characteristics apply in both directions.
1500 Watt Transient Voltage Suppressors
Absolute Maximum Ratings* T
Symbol Parameter Value Units
P
PPM
I
PPM
P
D
i
f(surge)
T
stg
T
J
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Note 1: Measured on 8.3 ms single half-sine wave; Duty cycle = 4 pulses per minute maximum.
Peak Pulse Power Dissipation at TA = 25°C, TP=1ms
Peak Pulse Current see table A
Steady State Power Dissipat i on
.375 " lead length @ T
Peak Forward Surge Current
superimposed on rated load (JEDEC m et hod)
Storage Temperature Range -65 to +175
Operating Junction Temperature -65 to +175
= 75°C
A
= 25°C unless otherwise noted
A
(Note 1)
minimum 1500 W
5.0 W
200 A
°C
°C
1998 Fairchild Semiconductor Corporation
Transient Voltage Supressors
(continued)
1.5KE6.8(C)A - 1.5KE440(C)A
Electrical Characteristics T
Uni-directional
Bi-directional (C)
Device
Reverse
Stand-off Voltage
V
(V)
RWM
Breakdown Volt age
V
min max
= 25°C unless otherwise noted
A
BR
(V)
Test
Current
(mA)
IT
Max Clamping
Voltage @IPPM
VC(V)
Max Peak Pulse
Surge Current
I
(A)
PPM
Max Reverse
Leakage V
IR (uA)*
1.5KE6.8(C)A 5.80 6.45 7.14 10 10.5 143 1000
1.5KE7.5(C)A 6.40 7.13 7.88 10 11.3 133 500
1.5KE8.2(C)A 7.02 7.79 8.61 10 12.1 124 200
1.5KE9.1(C)A 7.78 8.65 9.55 1 13.4 112 50
1.5KE10(C)A 8.55 9.50 10.5 1 14.5 103 10
1.5KE11(C)A 9.40 10.5 11.6 1 15.6 96.2 5
1.5KE12(C)A 10.2 11.4 12.6 1 16.7 90.0 5
1.5KE13(C)A 11.1 12.4 13.7 1 18.2 82.0 5
1.5KE15(C)A 12.8 14.3 15.8 1 21.2 71.0 5
1.5KE16(C)A 13.6 15.2 16.8 1 22.5 67.0 5
1.5KE18(C)A 15.3 17.1 18.9 1 26.2 59.5 5
1.5KE20(C)A 17.1 19.0 21.0 1 27.7 54.2 5
1.5KE22(C)A 18.8 20.9 23.1 1 30.6 49.0 5
1.5KE24(C)A 20.5 22.8 25.2 1 33.2 45.2 5
1.5KE27(C)A 23.1 25.7 28.4 1 37.5 40.0 5
1.5KE30(C)A 25.6 28.5 31.5 1 41.4 36.2 5
1.5KE33(C)A 28.2 31.4 34.7 1 45.7 33.0 5
1.5KE36(C)A 30.8 34.2 37.8 1 49.9 30.1 5
1.5KE39(C)A 33.3 37.1 41.0 1 53.9 28.0 5
1.5KE43(C)A 36.8 40.9 45.2 1 59.3 25.3 5
1.5KE47(C)A 40.2 44.7 49.4 1 64.8 23.2 5
1.5KE51(C)A 43.6 48.5 53.6 1 70.1 21.4 5
1.5KE56(C)A 47.8 53.2 58.8 1 77.0 19.5 5
1.5KE62(C)A 53.0 58.9 65.1 1 85.0 17.7 5
1.5KE68(C)A 58.1 64.6 71.4 1 92.0 16.3 5
1.5KE75(C)A 64.1 71.3 78.8 1 104.0 14.6 5
1.5KE82(C)A 70.1 77.9 86.1 1 113.0 13.3 5
1.5KE91(C)A 77.8 86.5 95.5 1 125.0 12.0 5
1.5KE100(C)A 85.5 95.0 105.0 1 137.0 11.0 5
1.5KE110(C)A 94.0 106.0 116.0 1 152.0 9.9 5
1.5KE120(C)A 102.0 114.0 126.0 1 165.0 9.1 5
1.5KE130(C)A 111.0 124.0 137.0 1 179.0 8.4 5
1.5KE150(C)A 128.0 143.0 158.0 1 207.0 7.2 5
1.5KE160(C)A 136.0 152.0 168.0 1 219.0 6.8 5
1.5KE170(C)A 145.0 162.0 179.0 1 234.0 6.4 5
1.5KE180(C)A 154.0 171.0 189.0 1 246.0 6.1 5
1.5KE200(C)A 171.0 190.0 210.0 1 274.0 5.5 5
1.5KE220(C)A 185.0 209.0 231.0 1 328.0 4.6 5
1.5KE250(C)A 214.0 237.0 263.0 1 344.0 4.5 5
1.5KE300(C)A 256.0 285.0 315.0 1 414.0 3.8 5
1.5KE350(C)A 300.0 333.0 368.0 1 482.0 3.2 5
1.5KE400(C)A 342.0 380.0 420.0 1 548.0 2.8 5
1.5KE440(C)A 376.0 418.0 462.0 1 602.0 2.6 5
RWM
* For bidirectional parts with V
<10V, the IR max limit is doubled.
RWM
Loading...