Fagor LAP-08 V, LAP-08 P, LAP-10 V, LAP-10 P Product information
LAUNDRY
PROFESSIONAL
WASHER EXTRACTORS
–
01.
MORE FEATURES
- New TP2 scheduler with touch
screen. It allows to create an
indefinite number of programs
(26 preestablished).
- Allows programming, importing
or exporting programs and
software updates via USB.
- Standard traceability:
The entire washing process
(temperatures, water levels) is
stored in the washing machine
and can be extracted to a PC
via USB memory.
- WET CLEANING included in
the scheduler (modifiable water
levels and washing speed).
- Wash-Control, PC software
for program management,
traceability and other data.
- Designed for remote
connections.
- Designed for multipayment
system.
- 8 programmable automatic
liquid dosing signals with
timedelay element. With a
choice of 6 extra signals.
- Reduced washing cycles
(heating power 6 kW).
02.
MORE ROBUSTNESS
- Gray skinplate.
- Tank, drum and blades
made of AISI 304.
- Robust door made of aluminum.
- Industrial door lock machine
door seal (no inner drum seal).
- Industrial housing
and bearings.
- Frequency converter and
industrial motor.
CHARACTERISTICS
- High spinning washers, not
requiring anchoring to the ground.
- Tank with 4 detergent
compartments.
- 2 standard water inlets.
- Equipped with a frequency
converter (standard 50-60 Hz).
Balancing system controlled by
the same converter.
- Model with drain valve (V) and
model with drain pump (P).
- Model with valve specially
designed to wash mops.
- Includes levelers.
- CE and WRAS product certifications.
PROFESSIONAL
LAUNDRY
03.
MORE VERSATILITY
- New possibility to customize the
machines from factory with the
available options.
- OPL
- ONE UNIT
- ELECTRIC
- DRAIN VALVE
OPTIONS
- Double drain (only valve mode).
- Drain pump kit.
- Drain normally closed "NC".
- 6 extra signals for dosing: a total
- Silicone door seal.
- Door with opposite opening.
- Delayed door opening, in case
- Stainless steel fitment AISI 304.
- Designed for remote connections.
COIN
Convertible models from
self-service to OPL and vice versa.
COLUMN
Standard model easily installable
in column.
HOT WATER
Standard electric model easily
convertible to hot water model
and vice versa.
DRAIN PUMP
Standard models easily convertible.
Easy access for maintenance.
In case of power failure, the water
stays inside the tank.
of up to 14 available.
of power failure.
(Wifi, Ethernet ...)
INDUSTRIAL
LAUNDRY
04.
MORE EFFICIENCY
- Intelligent and manual weighing
system. Automatic adjustment
of water and chemicals.
- Possibility of configuring three
levels of savings.
- High Factor G 450. Reduced
residual humidity
drying time.
- Designed for use with tanks for
water recovery.
- Plinth that facilitates access
to the machine.
- Special mop plinth (with filter) valve models only.
- Plinth and water recovery tank.
- Kits for self-service: Central
payment, file, wallet.
- Voltage 110 1N 50/60 Hz.
- Voltage 440 3~ (No N) 50/60 Hz.
Reduces
LAUNDRY | PROFESSIONAL WASHER EXTRACTORS
TECHNICAL DATA
UNID. LAP-08 V LAP-08 P LAP-10 V LAP-10 P
DRUM
Load capacity (KG) 1:9 / 1:10 Kg 9/8 9/8 11/10 11/10
Volume I 80 80 100 100
Diameter mm 532 532 532 532
Depth mm 360 360 425 425
GENERAL DETAILS
Washing speed / Spinning speed r.p.m. 50/ 1.250 50/ 1.250 50/ 1.250 50/ 1.250
G Factor - 450 450 450 450
Self service version - SI SI SI SI
Double drain - Si No Si No
Weighing system / tilting system - No No No No
DOOR
Height center door / Height base door mm 537/280 537/280 537/280 537/280
Diameter mm 373 373 373 373
DYNAMIC FORCE
Static Load KN 1,4 1,4 1,5 1,5
Maximum Dynamic load KN 0,5 0,5 0,6 0,6
Vertical maximum load KN 0,64 0,64 0,75 0,75
Max revolutions r.p.m. 1.250 1.250 1.250 1.250
Frequency of dynamic load - 18,33 18,33 18,33 18,33
POWER
Motor kW 0,75 0,75 0,75 0,75
Electric heating kW 6 6 6 6
Hot water heating kW 0 0 0 0
Max. power electric model kW 6,25 6,25 6,25 6,25
Max. power HW model kW 0,75 0,75 0,75 0,75
Max. power steam kW No No No No
CONNECTIONS
Water inlet inch 3/4” 3/4” 3/4” 3/4”
Drain mm/inch 2” 1” (Bomba) 2” 1” (Bomba)
DIMENSIONS / PACKING DIMENSIONS
Width / width mm 680/710 680/710 680/710 680/710
Depth / Depth mm 698/832 698/832 772/832 772/832
Height / height mm 1.040/1.130 1.040/1.130 1.040/1.130 1.040/1.130
Net weight / Gross weight kg 140/150 140/150 140/150 150/160
01. Soap dispenser
02. USB port
03. Drain
04. Main switch
05. Electric connection to liquid soap pumps
06. Electrical connection
07. Liquid soap inlet
08. Cold water inlet
09. Hot water inlet
10. Plinth height 389 mm
A B C D E F G H I J K L M N O P Q
LAP-08 V 680 698 1040 278 373 86 964 962 922 944 954 110 366 453 528 603 199
LAP-08 P 680 698 1040 278 373 - 964 962 922 944 954 110 366 453 528 603 -
LAP-10 V 680 772 1040 278 373 86 964 962 922 944 954 110 366 453 528 603 199
LAP-10 P 680 772 1040 278 373 - 964 962 922 944 954 110 366 453 528 603 -
Loading...