Faber JEWL2430 User Manual

Jewel - Custom Tilt Out Range Hood

Integrated custom range hood

The Jewel comes with an unfinished metal front
which you can attach your own custom cabinet
face to. When tilted out the Jewel extends for a
total depth of 20.5” from front to back, providing
adequate coverage for most cook tops.

For a seamless look in the kitchen, the Jewel is your integrated solution. The Jewel tilts in, flush with your cabinets, neatly tucking
the hood away. You supply your own custom cabinet face to integrate the Jewel in with your other cabinets. The hood is 18” tall
which replaces your standard upper cabinet with an attractive stainless steel range hood with a 600 cfm PRO motor.

Model # Size | Color Performance Range Sound Levels

JEWL2430
JEWL36

front panel is unnished, ready to accept a custom wood panel - 15 lb. maximum

24 / 30
36

200 - 600 CFM
200 - 600 CFM

3.5 - 6.5 sones

3.5 - 6.5 sones

Feature Chart

Product Dimensions 22 3/16” or 34” (W) x 18 7/8” (H) x 11” (D)

Convertible to Ductless / Recirculating Yes - charcoal kit needed

Controls 3 Speed Push

Lighting 2 X 20 (W) Halogen

Ducting Top 6” Round

Grease Filters dishwasher safe mesh

Auto On / Off Yes - fan turns on when pulled out

Integrate front panel Yes - Use your own custom wood front

Adjustable Mounting Hardware Yes - up/down & in/out

Pro Motor with Metal Impellers Ye s

AC Input 120 V - 60 hz

AC Power Max 490 W at 4.1 A

Annual Electricty Costs $5.29 / Year *

* Note – ran 30 minutes a day on low speed with the lights on, 365 days, using the North American average of 12.2 cents per kWh.

p.o. box 435 • Wayland, MA 01778 • tel: [phone] • fax: [phone] • e-mail: [e-mail] • www.faberonline.com

Dimensional Diagrams

(see installation instructions for more information)

Front View

Side Views (Closed and Open)

Custom Front Panel Dimensions -

24”, 30”, 36”

for integrating the Jewel into your existing cabinetry

If you need a 30” wide cabinet, you
would purchase the 24” Jewel and
have a cabinet shop make a 30” wide
by 18 7/8” high panel. Or your cabinet
maker can fabricate 2 - (3”) wide filler
strips for either side of the 24” Jewel.
For a 24” wide cabinet, make a 24”
wide by 18 7/8” tall panel. For a 36”
wide cabinet, make a 36” wide by 18
7/8” tall panel.

ACCESSORIES

Charcoal Filters # FILTER1

For recirculating installations, high
quality, heavy duty filters ensure the
removal of smoke and odors from the
kitchen. Some ductwork is required to
exhaust the unit out of the cabinet.

WARNING! Product specifications are subject to change without notification. Consult the installation instructions before you begin installing this range hood.

CFM Reducer Kit

For use in make up air environments where
an under 300 cfm hood is required. This kit
reduces the ducting to 5” round and reduces
the cfm to under 300

# CFMRED

Rev. 1/13