• 4 ports of SFP+ 10GbE or 4 ports of
SFP 1GbE on front faceplate
• 16 port multi-rate (100Mb/1/2.5Gb)
PoE+ switch with 32 10/100/1000
PoE+ ports
• All configurations Non-blocking
full duplex
• Two new 48 port switches with
10GbE uplinks that support 24 ports
with half/full-duplex operation
• Copper, Fiber, and PoE-Plus models
• Optional two-port 10 GbE fiber and
copper options to provide additional
10Gbps streams of uplink bandwidth
• Optional two-port 40 GbE to provide
80 Gbps uplinks or SummitStackV160 stacking
• 40 Gbps stacking via frontpanel 10Gb Ethernet ports or
optional SummitStack
Form Factor
• 1 RU w/ 1 expansion slot for additional
interface ports and 1 expansion slot
for timing options
Features
• Secure Network Access through role
based policy or Identity Management
• Front-to-Back or
Back-to-Front airflow
• SyncE G.8232 and IEEE 1588
PTP Timing
• 850W of PoE-Plus budget with 1 PSU
• 1440W of PoE-Plus budget with
2 PSUs
• Multi-rate Ethernet
(100Mb/1/2.5Gb) support
• Y.1731 OAM Measurements in
hardware for accuracy
• Energy Ecient Ethernet – IEEE
802.3az on 10/100/1000 ports
• Hot-Swappable Power Supplies and
Fan Tray
Data Sheet
ExtremeSwitching™ X460-G2 Series
Scalable advanced aggregation switch with ExtremeXOS®
modular operating system.
The X460-G2 series is based on Extreme Networks revolutionary
ExtremeXOS, a highly resilient OS that provides continuous uptime,
manageability and operational eciency. Each switch oers the same highperformance, non-blocking hardware technology, in the Extreme Networks
tradition of simplifying network deployments through the use of common
hardware and software throughout the network.
The X460-G2 switches are eective campus edge switches that support
Energy Ecient Ethernet (EEE – IEEE 802.3az) with IEEE 802.3at PoEplus and can also serve as aggregation switches for traditional enterprise
networks. The X460-G2 series is also an option for DSLAM or CMTS
aggregation, or for active Ethernet access.
The X460-G2 can also be used as a top-of-rack switch for many data
center environments with features such as high-density Gigabit Ethernet
for concentrated data center environments; XNV™ (ExtremeXOS Network
Virtualization) for centralized network-based Virtual Machine (VM)
inventory, VM location history and VM provisioning; Direct Attach™ to
ooad VM switching from servers, thereby improving performance; highcapacity Layer 2/Layer 3 scalability for highly virtualized data centers; and
intra-rack and cross-rack stacking with industry leading flexibility.
Comprehensive Security Management
• User policy and host integrity enforcement, and identity management
• Universal Port Dynamic Security Profiles to provide fine granular
security policies in the network
WWW.EXTREMENETWORKS.COM
1
Page 2
• Threat detection and response instrumentation to
react to network intrusion with CLEAR-Flow Security
Rules Engine
• Denial of Service (DoS) protection and IP security
against man-in-the-middle and DoS attacks to harden
the network infrastructure
• Role Based Policy enables support for policy profiles to
secure and provision network resources based upon the
role the user or device plays within the network
Flexible Port Configuration
The X460-G2 oers flexible port configurations. X460-G2
24 port copper models with 10G uplinks can have up to
8 fiber GbE ports (four dedicated ports + four shared
ports) and 20 GbE copper ports (PoE-plus or non-PoE).
The X460-G2 24 port copper models with 1Gb uplinks can
provide up to 12 SFP ports with 20 Gigabit Ethernet ports
or eight SFP ports with 24 copper GbE ports.
All models come equipped with either 4 ports of SFP+
10 GbE or 4 ports of SFP 1GbE resident on the faceplate
of each model. Through an optional VIM slot, X460-G2
switches can be equipped with an additional 2 ports of 10
GbE for a total of six 10 Gigabit Ethernet ports on the 10Gb
uplink models.
As another option, each unit can be equipped with 2 ports
of QSFP+ 40 Gigabit Ethernet for uplinks or stacking.
provides long-distance 40 Gbps stacking connectivity
of up to 40 km while reducing the cable complexity of
implementing a stacking solution. SummitStack-V is
compatible with X440, X440-G2, X450, X450-G2, X460,
X460-G2, X480, X670, X670V, X670-G2 and X770 switches
running the same version of ExtremeXOS. SummitStack-V
enabled 10 GbE ports must be physically direct-connected.
Note: SummitStack-V is NOT supported on the 1GbE (SFP) front panel
faceplate ports of non-10Gb X460-G2 models but SummitStack-V is
supported on the 10GbE VIM cards (VIM-2x or VIM-2t) when used in the
non-10GbE switches.
SummitStack-V160 — Flexible Stacking
Over 40GbE
The X460-G2 also supports high-speed 160 Gbps stacking,
which is ideal for demanding applications where a high
volume of trac traverses through the stacking links, yet
bandwidth is not compromised through stacking.
SummitStack-V160 can support passive copper cable
(up to 3m), active multi-mode fiber cable (up to 100m),
and QSFP+ optical transceivers for 40 GbE up to 10km.
With SummitStack-V160, the X460-G2 provides a flexible
stacking solution inside the data center or central oce
to create a virtualized switching infrastructure across rows
of racks. SummitStack-V160 is compatible with X460-G2,
X480, X670V, X670-G2 and X770 switches running the
same version of ExtremeXOS.
Note: The 40Gb Ethernet ports CANNOT be fanned out into four
10Gb ports.
High-Performance Stacking
Up to eight X460-G2 switches can be stacked using
three dierent methods of stacking: SummitStack,
SummitStack-V, and SummitStack-V160.
SummitStack — Stacking Using Copper
CX4 Connections
The X460-G2 supports SummitStack by using the X460-G2VIM-2ss module, which oers high-speed 40 Gbps stacking
performance and provides compatibility with the X440,
X460, X460-G2 and X480 stackable switches running the
same version of ExtremeXOS.
SummitStack-V — Flexible Stacking Over 10GbE
ExtremeXOS supports the SummitStack-V capability
using 2 of the native 10 GbE ports on the faceplate as
stacking ports, enabling the use of standard cabling and
optics technologies used for 10 GbE SFP+, SummitStack-V
Intelligent Switching and MPLS/
H-VPLS Support
The X460-G2 supports sophisticated and intelligent
Layer 2 switching, as well as Layer 3 IPv4/IPv6 routing
including policy-based switching/routing, Provider Bridges,
bidirectional ingress and egress Access Control Lists, and
bandwidth control by 8 Kbps granularity both for ingress
and egress.
To provide scalable network architectures used mainly
for Carrier Ethernet network deployment, the X460-G2
supports MPLS LSP-based Layer 3 forwarding and
Hierarchical VPLS (H-VPLS) for transparent LAN
services. With H-VPLS, transparent Layer 3 networks
can be extended throughout the Layer 3 network cloud by
using a VPLS tunnel between the regional transparent
LAN services typically built by Provider Bridges (IEEE
802.1ad) technology.
WWW.EXTREMENETWORKS.COM
2
Page 3
IEEE 802.3at PoE-plus
Role-based Policy
IEEE 802.3af Power over Ethernet has been widely used
in the campus enterprise edge network for Ethernetpowered devices such as wireless access points, Voice
over IP phones, and security cameras. Ethernet port
extenders such as Extreme Networks ReachNXT™ 100-8t
can also utilize PoE, making installation and management
easier and reducing maintenance costs. The newer IEEE
802.3at PoEplus standard expands upon Power over
Ethernet by increasing the power limit up to 30 watts, and
by standardizing power negotiation by using LLDP. The
X460-G2 supports IEEE 802.3at PoE-plus and supports
standards-compliant PoE devices today and into the future.
1588 Precision Time Protocol (PTP)
The X460-G2 oers Boundary Clock (BC), Transparent
Clock (TC), and Ordinary Clock (OC) for synchronizing
phase and frequency and allowing the network and
the connected devices to be synchronized down to
microseconds of accuracy over Ethernet connection.
Audio Video Bridging (AVB)
The X460-G2 series supports IEEE 802.1 Audio Video
Bridging to enable reliable, real-time audio/video
transmission over Ethernet. AVB technology delivers the
quality of service required for today’s high-definition and
time-sensitive multimedia streams.
Utilizing NetSight Policy Management, the role-based policy
framework empowers a network administrator to define
distinct roles or profiles that represent industry specific
operational groups that may exist in an education or a
business environment (e.g., administrator, teacher, student,
guest). Each defined role is granted individualized access to
specific network services and applications and these access
privileges remain associated with users as they move across
both wired and wireless network access points.
Users can be authenticated via IEEE 802.1X, MAC address,
or web authentication, and then assigned a pre-defined
operational role. Network operations can be seamlessly
tailored to meet business-oriented requirements by
providing each role with individualized access to network
services and applications, thus aligning network resource
utilization with business goals and priorities.
In addition, administrators can easily transition from basic
VLAN and complex ACL deployments to the Extreme
Networks role based policy framework in a seamless
fashion, without the need to make changes to their
RADIUS infrastructure.
Ordering Notes
The X460-G2 base switches do not ship with fan trays
or power supplies. The fan tray, power supplies, and any
optional VIM cards must be ordered separately. There is
only one optional VIM slot on each X460-G2 switch. The
optional Timing Module has a separate dedicated slot on
the back of the X460-G2 switch. Beginning with EXOS 22.1,
all X460-G2 base systems will include an Advanced Edge
license -- an upgrade over the Edge License bundled with
earlier EXOS releases.
WWW.EXTREMENETWORKS.COM
3
Page 4
Specifications
Performance/Scale
Switch ModelWW
X460-G2-24t-10GE428-62296 Gbps220.2 Mpps
X460-G2-48t-10GE448-62336 Gbps250 Mpps
X460-G2-24x-10GE428-62296 Gbps220.2 Mpps
X460-G2-48x-10GE448-62336 Gbps250 Mpps
X460-G2-24p-10GE428-62296 Gbps220.2 Mpps
X460-G2-48p-10GE448-62336 Gbps250 Mpps
X460-G2-24p-24hp-10GE448-62336 Gbps250 Mpps
X460-G2-24t-24ht-10GE448-62336 Gbps250 Mpps
X460-G2-16mp-32p-10GE4321662384 Gbps285.7 Mpps
X460-G2-24t-GE432-22224 Gbps166.7 Mpps
X460-G2-48t-GE452-22264 Gbps196.4 Mpps
X460-G2-24p-GE432-22224 Gbps166.7 Mpps
X460-G2-48p-GE45222264 Gbps196.4 Mpps
Maximum Active
10/100/1000 Ports
• Less than 4 microsecond latency (64-byte)
• Layer 2/MAC Addresses: 96K (98,304)
• IPv4 Host Addresses: 62K
Maximum Active
100/1/2.5GbE Ports
Maximum Active
10GbE Ports
Maximum Active
40GbE Ports
Aggregated Switch
Bandwidth
• Rate Limiting Granularity: 8 Kbps
• All ports Full Duplex - half duplex operation is not
supported except for 24 ports on X460-G2-24p-24hp-
Frame Forwarding
Rate
10GE4 and X460-G2-24t-24ht-10GE4
• IPv4 LPM Entries: 12K, 16K on X460-G2-16mp32p-10GE4
• IPv6 Host Addresses: 24K
• IPv6 LPM Entries: 6K, 8K on X460-G2-16mp-32p-10GE4
• Policy Capabilities
• Rules per Profile: Up to 1464
• Authenticated Policy Users per Switch: Up to 12,288
• Authenticated Policy Users per Port: Up to 12,288
• Unique Permit/Deny Rules per switch: 1464
• 4096 VLAN/VMANs
• The following number of rules listed below can be
• 9216 Byte Max Packet Size (Jumbo Frame)
• 128 load sharing trunks, up to 32 members per trunk
• 4,096 ingress bandwidth meters
• Ingress and egress bandwidth policing/rate limiting per
flow/ACL
• 8 QoS egress queues/port
• Egress bandwidth rate shaping per egress queue and
aected by the switch configuration options in EXOS
22.4 or greater
• MAC Rules: up to 512
• IPv4 Rules: up to 1280
• IPv6 Rules: up to 256
• L2 Rules: up to 184
• Rate Limiting: Per Class of Service
NOTE: Policy and rule limits here reflect support available in EXOS 22.4
or greater
per port
WWW.EXTREMENETWORKS.COM
4
Page 5
Front-Panel Ports
Switch HardwarePorts
• 24 x 10/100/1000BASE-T (RJ-45) - 4 ports are combo ports
• 8 x 100/1000BASE-X (SFP) unpopulated ports – 4 ports are combo ports
X460-G2-24t-10GE4
X460-G2-48t-10GE4
X460-G2-24t-24ht-10GE4
X460-G2-24x-10GE4
X460-G2-48x-10GE4
X460-G2-24p-10GE4
X460-G2-48p-10GE4
X460-G2-24p-24hp-10GE4
X460-G2-24t-GE4
• 4 x 10GBASE-X SFP+ (unpopulated ports)
• 1 x Serial (console port RJ-45)
• 1 x 10/100/1000BASE-T out-of-band management port
• 1 x USB port for external USB flash
• 48 x 10/100/1000BASE-T (RJ-45)
• 4 x 10GBASE-X SFP+ (unpopulated ports)
• 1 x Serial (console port RJ-45)
• 1 x 10/100/1000BASE-T out-of-band management port
• 1 x USB port for external USB flash
• 24 x 10/100/1000BASE-T Full-Duplex (RJ-45)
• 24 x 10/100/1000BASE-T Full/Half-Duplex (RJ-45)
• 4 x 10GBASE-X SFP+ (unpopulated ports)
• 1 x Serial (console port RJ-45)
• 1 x 10/100/1000BASE-T out-of-band management port
• 1 x USB port for external USB flash
• 24 x 100/1000BASE-X (SFP) unpopulated ports – 4 ports are combo ports
• 8 x 10/100/1000BASE-T (RJ-45) - 4 ports are combo ports
• 4 x 10GBASE-X SFP+ (unpopulated ports)
• 1 x Serial (console port RJ-45)
• 1 x 10/100/1000BASE-T out-of-band management port
• 1 x USB port for external USB flash
• 48 x 100/1000BASE-X (SFP) unpopulated ports
• 4 x 10GBASE-X SFP+ (unpopulated ports)
• 1 x Serial (console port RJ-45)
• 1 x 10/100/1000BASE-T out-of-band management port
• 1 x USB port for external USB flash
• 24 x 10/100/1000BASE-T PoE-Plus - 4 ports are combo ports
• 8 x 100/1000BASE-X (SFP) unpopulated ports – 4 ports are combo ports
• 4 x 10GBASE-X SFP+ (unpopulated ports)
• 1 x Serial (console port RJ-45)
• 1 x 10/100/1000BASE-T out-of-band management port
• 1 x USB port for external USB flash
• 48 x 10/100/1000BASE-T PoE-Plus
• 4 x 10GBASE-X SFP+ (unpopulated ports)
• 1 x Serial (console port RJ-45)
• 1 x 10/100/1000BASE-T out-of-band management port
• 1 x USB port for external USB flash
• 24 x 10/100/1000BASE-T Full-Duplex PoE-Plus
• 24 x 10/100/1000BASE-T Full/Half-Duplex PoE-Plus
• 4 x 10GBASE-X SFP+ (unpopulated ports)
• 1 x Serial (console port RJ-45)
• 1 x 10/100/1000BASE-T out-of-band management port
• 1 x USB port for external USB flash
• 24 x 10/100/1000BASE-T (RJ-45) - 4 ports are combo ports
• 8 x 100/1000BASE-X (SFP) unpopulated ports – 4 ports are combo ports
• 4 1GBASE-X SFP (unpopulated ports)
• 1 x Serial (console port RJ-45)
• 1 x 10/100/1000BASE-T out-of-band management port
• 1 x USB port for external USB flash
WWW.EXTREMENETWORKS.COM
5
Page 6
Front-Panel Ports (cont.)
Switch HardwarePorts
• 24 x 10/100/1000BASE-T PoE-Plus - 4 ports are combo ports
• 8 x 100/1000BASE-X (SFP) unpopulated ports – 4 ports are combo ports
X460-G2-24p-GE4
X460-G2-48p-GE4
X460-G2-16mp-32p-10GE4
X460-G2 VIM-2x2 x 10GBASE-X SFP+ (unpopulated ports)
X460-G2 VIM-2t2 x 10GBASE-T Ports
X460-G2 VIM-2ss2 x SummitStack (CX4) Ports
X460-G2 VIM-2q2 x 40GBASE-X QSFP+ (unpopulated ports)
X460-G2 TM-CLKClock Module for SyncE and 1588 with 2 mini-BNC connectors for 10MHz and 1PPS signals
• 4 1GBASE-X SFP (unpopulated ports)
• 1 x Serial (console port RJ-45)
• 1 x 10/100/1000BASE-T out-of-band management port
• 1 x USB port for external USB flash
• 48 x 10/100/1000BASE-T PoE-Plus
• 4 x 1GBASE-X SFP (unpopulated ports)
• 1 x Serial (console port RJ-45)
• 1 x 10/100/1000BASE-T out-of-band management port
• 1 x USB port for external USB flash
• 16 x 100Mb/1/2.5GbE PoE-Plus
• 32 x 10/100/1000BASE-T PoE-Plus
• 4 x 10GBASE-X SFP+ (unpopulated ports)
• 1 x Serial (console port RJ-45)
• 1 x 10/100/1000BASE-T out-of-band management port
• 1 x USB port for external USB flash
NOTE: All X460-G2 switches have a USB 2.0 port that is supported as a port to a storage device with all EXOS versions of 22.1 or higher
NOTE: The multi-rate ports do NOT support SynchE
Physical
Switch ModelWeightPhysical Dimension
X460-G2-24t-10GE412.9 lb (5.85 kg)
X460-G2-48t-10GE413.3 lb (6.03 kg)
X460-G2-24t-24ht-10GE413.3 lb (6.03 kg)
X460-G2-24x-10GE413.1 lb (5.94 kg)
X460-G2-48x-10GE414.1 lb (6.4 kg)
X460-G2-24t-GE412.9 lb (5.85 kg)
X460-G2-48t-GE413.3 lb (6.03 kg)
X460-G2-24p-10GE414.6 lb (6.62 kg)
X460-G2-48p-10GE415.2 lb (6.9 kg)
X460-G2-24p-24hp-10GE415.2 lb (6.9 kg)
X460-G2-16mp-32p-10GE415.2 lb (6.9 kg)
X460-G2-24p-GE414.6 lb (6.62 kg)
X460-G2-48p-GE415.2 lb (6.9 kg)
X460-G2 VIM-2x0.57 lb (0.26 kg)
X460-G2 VIM-2t0.57 lb (0.26 kg)
X460-G2 VIM-2ss0.57 lb (0.26 kg)
Height: 1 RU / 1.73 inches (4.4 cm)
Width: 17.4 inches (44.1 cm)
Depth: 16.94 inches (43.03 cm)
Height: 1 RU / 1.73 inches (4.4 cm)
Width: 17.4 inches (44.1 cm)
Depth: 19.2 inches (48.8 cm)
Height: 1.4 inches (3.55 cm)
Width: 3.4 inches (8.6 cm)
Depth: 5.5 inches (13.9 cm)
Height: 1.4 inches (3.55 cm)
Width: 3.4 inches (8.6 cm)
Depth: 5.5 inches (13.9 cm)
Height: 1.4 inches (3.55 cm)
Width: 3.4 inches (8.6 cm)
Depth: 5.5 inches (13.9 cm)
WWW.EXTREMENETWORKS.COM
6
Page 7
Physical (cont.)
Switch ModelWeightPhysical Dimension
X460-G2 VIM-2q0.57 lb (0.26 kg)
X460-G2 TM-CLK0.19 lb (0.08 kg)
X460-G2 Front-to-Back fan module1.0 lb (0.46 kg)
X460-G2 Back-to-Front fan module1.0 lb (0.46 kg)
NOTE: Switch weights include installed fan module. They do not include installed VIM2 modules or PSUs.
* Please refer to the Summit Family Switches Hardware Installation Guide for packaged weight and dimensions.
Dual 300W AC or DC PS with Front to Back (FB) Air Flow
Declared Sound Power (LWAd)**
• 6.0 bels, 0C to 45C
• 6.6 bels @ 50C
Dual 300W AC or DC PS with Back to Front (BF) Air Flow
Declared Sound Power (LWAd)**
• 5.9 bels, 0C to 35C
• 7.2 bels, 45C
• 7.8 bels, 50C
Dual 300W AC or DC PS with Front to Back (FB) Air Flow
Declared Sound Power (LWAd)**
• 5.9 bels, 0C to 45C
• 7.7 bels, 50C
Dual 300W AC or DC PS with Back to Front (BF) Air Flow
Declared Sound Power (LWAd)**
• 5.9 bels, 0C to 35C
• 7.2 bels, 45C
• 7.8 bels, 50C
Dual 715W or 1100W AC PS with Front to Back (FB) Air Flow
Declared Sound Power (LWAd)**
• 6.9 bels, 0C to 45C
• 7.6 bels, 50C
Dual 715W or 1100W AC PS with Back to Front (BF) Air Flow
Declared Sound Power (LWAd)**
• 7.2 bels, 0C to 31C
• 7.6 bels, 35C
• 7.9 bels 50C
Dual 715W or 1100W AC PS with Front to Back (FB) Air Flow
Declared Sound Power (LWAd)**
• 7.3 bels, 0C to 35C
• 8.1 bels, 50C
Dual 715W or 1100W AC PS with Back to Front (BF) Air Flow
Declared Sound Power (LWAd)**
• 7.3 bels, 0C to 35C
• 8.1 bels, 50C
Dual 300W AC or DC PS with Front to Back (FB) Air Flow
Declared Sound Power (LWAd)**
• 6.0 bels, 0C to 45C
• 7.5 bels, 50C
Dual 300W AC or DC PS with Front to Back (FB) Air Flow
Declared Sound Power (LWAd)**
• 6.0 bels, 0C to 35C
• 6.9 bels, 45C
• 7.8 bels, 50C
WWW.EXTREMENETWORKS.COM
10
Page 11
Fan Acoustics (cont.)
Switch ModelAcoustic Information
Dual 300W AC or DC PS with Front to Back (FB) Air Flow
Bystander Sound Pressure*
• 48.9 dB(A), 0C to 45C
• 60.5 dB(A) @ 50C
X460-G2-48x-10GE4
Bystander Sound Pressure*
• 48.8 dB(A), 0C to 35C
• 57.5 dB(A), 45C
• 66.1 dB(A), 50C
* Bystander Sound Pressure is presented for comparison to other products measured using Bystander Sound Pressure.
**Declared Sound Power is presented in accordance with ISO-7779:2010(E), ISO 9296:2010 per ETSI/EN 300 753:2012-01
Dual 300W AC or DC PS with Back to Front (BF) Air Flow
Declared Sound Power (LWAd)**
• 6.0 bels, 0C to 45C
• 7.4 bels, 50C
Declared Sound Power (LWAd)**
• 6.0 bels, 0C to 35C
• 6.9 bels, 45C
• 7.8 bels, 50C
Accessories
X460-G2 POWER SUPPLIES
All X460-G2 series switches are sold a la carte so
power supplies and fans must be ordered separately. If
redundancy or higher power Power-over-Ethernet plus
capability is required, an additional power supply can be
installed in the system. Each power supply has a front-toback model and an equivalent back-to-front model for air
flow control.
• 300W AC PSU
• 300W AC PSU is compatible with X460-G224t/48t/24x/48x switches.
• 300W DC PSU
• 300W DC PSU is compatible with X460-G224t/48t/24x/48x switches.
• 350W PoE AC PSU
• 350W PoE AC PSU is compatible with all X460-G2
PoE switches and provides 150 watts of PoE-plus
power budget per one supply. When two PSUs are
installed, the total PoE-plus power budget becomes
300 watts.
• 715W PoE AC PSU
• 715W PoE AC PSU is compatible with all X460-G2
PoE switches switches and provides 500 watts of
PoE-plus power budget per one supply. When two
PSUs are installed, the total PoE-plus power budget
becomes 1031 watts.
• 1100W PoE AC PSU
• 1100W PoE AC PSU is compatible with all X460-G2
PoE switches switches and provides 850 watts of
PoE-plus power budget per one supply. When two
PSUs are installed, the total PoE-plus power budget
becomes 1440 watts.
• Optional Rear Rail Mounting Kit
• The Rear Rail Kit (order code 16776) is an optional
accessory for certain X460-G2 non-PoE and SFP
models. It enables four post mounting for non-PoE and
SFP X460-G2 models when needed. Please note that
"deeper" X460-G2 PoE models already ship with this
mounting option included.
X460-G2 Optional Modules
X460-G2 series switches have two slots, VIM and Timing, to
support optional modules that support 10 Gigabit Ethernet,
40Gigabit Ethernet, stacking and timing modules. The VIM
slot supports a two-port SFP+ 10 Gigabit Ethernet module,
a two-port 10GBase-T Gigabit Ethernet module, a two-port
SummitStack module, or a two-port QSFP+ 40 Gigabit
Ethernet module. The Timing slot supports a timing module
for SyncE and 1588PTP.
• VIM Modules
• X460-G2 VIM-2x
• X460-G2 VIM-2t
• X460-G2 VIM-2ss
• X460-G2 VIM-2q
• Timing Modules
• X460-G2 TM-CLK
X460-G2 VIM-2X
2-port 10 Gigabit Ethernet module - provides two
SFP+ ports. These two SFP+ ports can support both
10 Gigabit Ethernet SFP+ transceivers and Gigabit
Ethernet transceivers.
X460-G2 VIM-2T
2-port 10 Gigabit Ethernet module, provides two 10GBase-T
copper ports.
WWW.EXTREMENETWORKS.COM
11
Page 12
X460-G2 VIM-2SS
X460-G2 TM-CLK
SummitStack module has two SummitStack stacking
ports, and provides a 40 Gigabit stacking solution. This
stacking module oers compatibility with other Extreme
Module required for supporting G.8232 Synchronous
Ethernet (SyncE) and ITU 1588 Precision Time Protocol
(PTP) – available on all X460–G2.
Networks stackable switches, which are Summit X440,
Summit X460, and Summit X480.
X460-G2 VIM-2Q
2-port 40 Gigibit Ethernet module – provides 2 fully
functional QSFP+ ports for uplinks or can be used for
Warranty
Ltd. Lifetime with eAHR-2
For warranty details, visit http://www.extremenetworks.
com/go/warranty
SummitStack-V160 providing a 160 Gigabit stacking
solution.
Power Supplies, Fan Tray. Timing Modules and VIMS Are Ordered Separately
Ordered Empty
Shipped Empty with blank panels for 1 PSU
slot, VIM slot & Timing Module slot
Optional: Timing
Module for SyncE
and 1588 PTP
ordered separately
WWW.EXTREMENETWORKS.COM
Optional: VIM Cards
ordered separately
Required: Fan
Tray with Air
Flow Direction
ordered separately
Optional: Redundant/
Additive Power
Supply with Air
Flow Direction
ordered separately
Required: First
Power Supply with
Air Flow Direction
ordered separately
12
Page 13
Transceiver Support Matrix
Part Numbers
16701, 16702, 16703, 16704, 16705,
16706, 16720, 16756, 16757
16711
10GB Transceivers and Cables10Gb Front Panel10Gb SFP+ VIM
1030110GBASE-SR SFP+YY
1030210GBASE-LR SFP+YY
1030910GBASE-ER SFP+YY
10310ZR SFP+ moduleYY
10303
10304
10305
10306
10307
10GBASE-LRM SFP+NY
10GBASE-CR4 1mYY
10GBASE-CR4 3mYY
10GBASE-CR4 5mNY
10GBASE-CR4 10mNY
Part Numbers
16701, 16702, 16703, 16704, 16705,
16706, 16720, 16756, 16757
16711
1GB and 100MB Transceiver10Gb Front Panel10Gb SFP+ VIM
10051H, 10071H1000BASE-SX SFPYY
10052H, 10072H1000BASE-LX SFPYY
10053H1000BASE-ZX SFPYY
10056H, 10057H1000BASE-BX-D SFP and BX-U SFPYY
10064
10063
10060
1000BASE-LX100 SFPYY
100FX SFPNN
100FX/1000LX SFPNN
10070H, 1006510/100/1000BASE-T SFP1Gb Mode Only1Gb Mode Only
10067100BASE-FX SFPNN
10066
10058, 10059
100BASE-LX10 SFPNN
100BASE-BX-D SFP and BX-U SFPNN
WWW.EXTREMENETWORKS.COM
13
Page 14
Transceiver Support Matrix (cont.)
Part Numbers16705, 1670616701, 16703, 16716, 16718
1GB and 100MB Transceiver24/48 Port SFP SwitchesSFP Combo Ports
TAA 24 10/100/1000BASE-T, 4 1000BASE-X unpopulated SFP, Rear VIM Slot (unpop’d),
Rear Timing Slot (unpop’d), 2 power supply slots populated with 300W PS, fan module
Front-to-Back, ExtremeXOS Advanced Edge license with Policy
TAA 24 10/100/1000BASE-T POE+, 4 10GBASE-X unpopulated SFP+, Rear VIM Slot
(unpop’d), Rear Timing Slot (unpop’d), 2 power supply slots populated with 715W PS, fan
module Front-to-Back, ExtremeXOS Advanced Edge license with Policy
TAA 48 10/100/1000BASE-T POE+, 4 10GBASE-X unpopulated SFP+, Rear VIM Slot
(unpop'd). Rear Timing Slot (unpop'd), 2 power supply slots populated with 1100W PS, fan
module Front-to-Back, ExtremeXOS Advanced Edge license with Policy
TAA 24 SFP, 4 10GBASE-X unpopulated SFP+, Rear VIM Slot (unpop’d), Rear Timing Slot
(unpop’d), 2 power supply slots populated with 300W PS, fan module Front-to-Back,
ExtremeXOS Advanced Edge license with Policy
TAA 48 SFP, 4 10GBASE-X unpopulated SFP+, Rear VIM Slot (unpop’d), Rear Timing Slot
(unpop’d), 2 power supply slots populated with 300W PS, fan module Front-to-Back,
ExtremeXOS Edge license with Policy
TAA 24 10/100/1000BASE-T POE+, 4 1000BASE-X unpopulated SFP, Rear VIM Slot
(unpop’d), Rear Timing Slot (unpop’d), 2 power supply slots populated with 715W PS, fan
module Front-to-Back, ExtremeXOS Advanced Edge license with Policy
TAA 48 10/100/1000BASE-T POE+, 4 1000BASE-X unpopulated SFP, Rear VIM Slot
(unpop’d), Rear Timing Slot (unpop’d), 2 power supply slots populated with 1100W PS, fan
module Front-to-Back, ExtremeXOS Advanced Edge license with Policy
TAA-compliant Optional Virtual Interface Module for the rear of the X460-G2 providing 2
40GBASE-X ports unpopulated QSFP+
TAA-compliant Optional Virtual Interface Module for the rear of the X460-G2 providing 2
10GBASE-X ports unpopulated SFP+
TAA-compliant Optional Virtual Interface Module for the rear of the X460-G2 providing 2
10GBASE-T ports
TAA-compliant Optional Virtual Interface Module for the rear of the X460-G2 providing 2
ports of Extreme’s SummitStack
TAA-compliant Optional Timing Module for the rear of the X460-G2 providing the hardware
for SyncE and 1588 PTP clocking with 2 ports of mini-BNC connectors for clocking outputs
16 100Mb/1.0/2.5GbE PoE+, 32 10/100/1000BASE-T PoE+, 4 1000/10GBaseX unpop’d SFP+
ports, Rear VIM Slot (unpop’d), Rear Timing Slot (unpop’d), 2 1100 watt power supplies, fan
module Front-to-Back, EXOS Advanced Edge license w Policy, Trade Agreement Act
X460-G2 24 10/100/1000 full duplex PoE+, 24 10/100/1000 full/half duplex PoE+, 4
1000/10G SFP+ ports, Rear VIM Slot, Rear Timing Slot, 2 1100W AC power supplies , fan
module, Front-to-Back airflow, ExtremeXOS Advanced Edge w Policy, Trade Agreement Act
X460-G2 24 10/100/1000 full duplex, 24 10/100/1000 full/half duplex, 4 1000/10G SFP+
ports, Rear VIM Slot, Rear Timing Slot, two 300W AC power supplies, fan module, Front-toBack airflow, ExtremeXOS Advanced Edge w Policy, Trade Agreement Act model
ExtremeXOS Advanced Edge License for X460 series switches. For those upgrading a
X460-G2 switch already installed with an Edge License.
ExtremeXOS Advanced Core License upgrade from Edge License for X460 series switches.
For those upgrading a X460-G2 switch already installed with an Edge License.
ExtremeXOS Advanced Core License upgrade from Advanced Edge License for
X460 series switches
WWW.EXTREMENETWORKS.COM
16
Page 17
Ordering Information (cont.)
Part NumberNameDescription
16426X460 Multimedia (AVB) Feature Pack
109411100W AC PSU FB
109421100W AC PSU BF
10951715W AC PSU FB
10952715W AC PSU BF715W AC PoE Power Supply Module for X460-G2 series switches with Back-to-Front airflow
10930A300W AC PSU XT
10953350W AC PSU FB350W AC Power Supply Module - front to back airflow
10954350W AC PSU BF350W AC Power Supply Module - back to front airflow
10943300W AC PSU BF300W AC Power Supply Module – Back-to-Front airflow
10933300W +24V/-48V DC PSU
10944300W DC PSU BF300W DC Power Supply Module – Back-to-Front airflow
10945X460-G2 Fan Module FBFront-to-back airflow fan module for X460-G2 series switches
10946X460-G2 Fan Module BFBack-to-front airflow fan module for X460-G2 series switches
10319QSFP+ SR4 Module40 Gigabit Ethernet QSFP+ SR4 optical module, MPO connector, 100m link length1
10GB-F10-SFPP10 GB, ACTIVE OPTICAL DAC, 10 M 10Gb, Active optical direct attach cable with 2 integrated SFP+ transceivers, 10m
10GB-F20-SFPP10 GB, ACTIVE OPTICAL DAC, 20 M 10Gb, Active optical direct attach cable with 2 integrated SFP+ transceivers, 20m
10GB-BX10-D10 GB, SINGLE FIBER SM, -D 10 KM
10GB-BX10-U10 GB, SINGLE FIBER SM, -U 10 KM
10GB-BX40-D10 GB, SINGLE FIBER SM, -D 40 KM
10GB-BX40-U10 GB, SINGLE FIBER SM, -U 40 KM
10Gb, Single Fiber SM, Bidirectional, 1330nm Tx / 1330nm RX, 10Km, Simplex LC SFP+ (must
be paired with 10GB-BX10-U
10Gb, Single Fiber SM, Bidirectional, 1330nm Tx / 1330nm RX, 10Km, Simplex LC SFP+ (must
be paired with 10GB-BX10-D)
10Gb, Single Fiber SM, Bidirectional, 1330nm Tx / 1330nm RX, 40Km, Simplex LC SFP+ (must
be paired with 10GB-BX40-U)
10Gb, Single Fiber SM, Bidirectional, 1330nm Tx / 1330nm RX, 40Km, Simplex LC SFP+ (must
be paired with 10GB-BX40-D)
1x40Gb Mode Only
Data networking, not stacking
Supported configuration is to populate every other SFP+ port in system, with a maximum of half the 10Gb SFP+ ports configured with 10GBASE-T
transceivers. An adjacent SFP+ port should remain unused for every 10GBASE-T SFP+ installed
NOTE: Power supplies and fan tray MUST be ordered separately. They are NOT INCLUDED in the base switch model.