Extreme Networks X430 User Manual

DATA SHEET

Summit X430 Series

Provides Resilient, Secure, and Programmable Solution for Network Edge

Application Connectivity

HIGHLIGHTS

PERFORMANCE

• Summit X430 series switches are based
on the revolutionary ExtremeXOS that
runs across all of Extreme Networks
switches. Powered by ExtremeXOS,
Summit X430 switches provide resilient,
secure, and programmable solution
for your network edge application
connectivity. Summit X430 switch
provides low-to-medium density PoE+
and high-density Gigabit Ethernet ports
plus dedicated SFP ports in a compact
1RU format, supporting intelligent Layer
2 switching with Layer 2 – Layer 4 trac
classification and QoS on every port for
predictable network performance.

FEATURES

• 28 or 52 Gigabit Ethernet ports

• 8 port and 24 port IEEE802.3at PoE
solutions

• Line rate performance on all ports.

• BASE-T connectivity to
the desktop

• Dedicated BASE-X SFP ports.

• ExtremeXOS Layer 2 Edge
feature set

• Limited Lifetime Warranty

Overview

The Extreme Networks Summit X430 series Gigabit Ethernet standalone switches
provide network edge connectivity for enterprises, branch oces, and small and
medium-sized businesses. Summit X430 series are available in 28- or 52-port
10/100/1000 Mpps port models 8 or 24 port 10/100/1000 Mpps IEEE 802.3at
PoE models and are ideal for network convergence of Unified Communications,
wireless mobility, streaming media and multicast trac on a single open fabric
edge network.

The Summit X430 leverages a compact 1RU and 10-inch deep form factor, along
with a low volume operating mode that makes it ideal for open oce and wiring
closet environments. Summit X430 series switches support up to 4 fixed front
panel 100/1000BASE-X (SFP) unpopulated ports (two SFP ports on the 8 port
PoE+ switch) that can be utilized for high-speed backbone or link aggregation
connections between wiring closets.

Summit X430 series simplifies network operation by using the ExtremeXOS, a
modular operating system (OS) that spans all Extreme Networks Summit and
BlackDiamond Ethernet switches. Powered by ExtremeXOS, the Summit X430
series enables organizations to build highly resilient and secure edge networks
that support high network uptime, simplified management, increased operational
eciency with low total cost of ownership.

The Summit X430 provides exceptional Policy-based QoS with advanced trac
management for converged applications. With eight hardware queues per port to
support granular (8kbps-1Mbps) trac classification, the Summit X430 provides
flexible yet reliable solution for converged data, voice and video trac.

Summit X430 Series – Data Sheet 1

Simplified Network Deployment

• Single streamlined operating system across the
entire network.

• Widgets and automation scripts to simplify operation
and configuration.

• LLDP/LLDP-MED to provide device management

Scalability for Future Network Growth

• Layer 2 MAC addresses support – 16K

• Total VLANs – 4094

• Total trunks – 128 load sharing

• Maximum Layer 2 Multicast groups – 1K

High Performance

• High bandwidth, non-blocking architecture

• Quality of Service (QoS) with advanced trac
management capabilities.

• 8, 28 or 52 port

• Line rate ACL for controlling network resource utilization
and network protection.

• Less than 5 µs (64-byte) latency.

Comprehensive Security Features

• Identity aware role based policy and host
integrity enforcement

• Extensive MAC and IP security functionality to help prevent
man-in-the-middle attacks

• Multiple network edge authentication support with multiple
endpoints per port

Programmable Extensibility

• Integrate best-of-breed applications to your network with
an open, yet secure XML-based Application Programming
Interface (API).

• Integrate Extreme Networks and third-party developed
software applications using open standards-based
POSIX interfaces.

Enable Network Convergence

• Quality of Service (QoS) with advanced trac management
capabilities for converged applications.

• Trac policing or rate limiting on ingress, 802.1Q tagging
and Diserv marking, and shaping on egress with eight
queues per port provides predictable network performance.

High Availability and Resiliency

• Modular ExtremeXOS operating system

• Ethernet Automatic Protection Switching (EAPS)
resiliency protocol.

• Spanning Tree (802.1D), Per VLAN Spanning Tree (PVST+),
Rapid Spanning Tree (802.1w) and Multiple Instances of
Spanning Tree (802.1s) protocols for Layer 2 resiliency.

Technical Specifications **

PERFORMANCE WEIGHT AND PHYSICAL DIMENSIONS

SWITCH

MODEL

Summit

X430-8p

Summit

X430-24p

Summit

X430-24t

Summit

X430-48t

BANDWIDTH

20 Gbps 14.8 Mpps

56 Gbps 41.6 Mpps

56 Gbps 41.6 Mpps

104 Gbps 77.4 Mpps

FRAME

FORWARDING

RATE

A list of supported protocols and standards is available on the Extreme Networks website at:

http://www.extremenetworks.com/products/extreme-xos.aspx

SWITCH MODEL WEIGHT PHYSICAL DIMENSION

Summit X430-8p 5.0 lb (2.27 kg)

Summit X430-24p 10.0 lb (4.54 kg)

Summit X430-24t 8.4 lb (3.83 kg)

Summit X430-48t 9.1 lb (4.125 kg)

Summit X430 Series – Data Sheet 2

Height: 1RU 1.73 inches (4.4 cm)

Width: 8.7 inches (22.1 cm)

Depth: 10.0 inches (25.4 cm)

Height: 1RU 1.73 inches (4.4 cm)

Width: 17.4 inches (44.1 cm)

Depth: 10.0 inches (25.4 cm)

Height: 1RU, 1.73 inches (4.4 cm)

Width: 17.4 inches (44.1 cm)

Depth: 8.125 inches (20.6 cm)

Height: 1RU, 1.73 inches (4.4 cm)

Width: 17.4 inches (44.1 cm)

Depth: 10.0 inches (25.4 cm)

Technical Specifications **

ADDITIONAL PERFORMANCE SPECIFICATIONS

• Latency: <5 µs (64 byte)

• Max Packet Size: 9KB (Jumbo Frame Support)

• Total Trunks: 128 load sharing, members per trunk: 8

• VLANs: 4, 094

• Ingress ACLs: 1,024

Forwarding Tables

• Layer 2/MAC Addresses: 16k

• Layer 2/Multicast Groups: 1k

CPU, Memory

• Single Core CPU, 500 MHz clock

• 256MB DRAM

• 256MB Compact Flash

• 1.5MB packet buer on 8 and 24 port switches,

3.0MB packet buer on 48 port switch

QoS, Rate Limiting

• Ingress bandwidth meters: 512

• Ingress metering granularity: 8 kbps

• Ingress bandwidth policing/rate limiting per flow/ACL

• Egress QoS queues/port: 8

• Egress bandwidth rate shaping per egress queue and
per port

• Egress rate granularity: 64 kbps

• LED Indicators

• Per port status LED including power status

• System Status LEDs: management, fan and power

Operating Conditions
Temperature Range

• Humidity: 10% to 93% relative humidity, non-condensing

• Shock (Half Sine): 30m/s2 (3 G), 11 ms, 60 shocks

• Random vibration: 3 to 500 Hz at 1.5 G rms

SWITCH MODEL TEMP RANGE ALTITUDE

Summit X430-8p

Summit X430-24p

Summit X430-24t

Summit X430-48t

0° C to 40° C

(32° F to 104° F)

0° C to 45° C

(32° F to 113° F)

0° C to 45° C

(32° F to 113° F)

0° C to 45° C

(32° F to 113° F)

3048 meters

2000 meters

4000 meters

3000 meters

Storage and Transporation
Conditions (Packaged)

• Transportation Temperature:

-40° C to 70° C (- 40° F to 158° F)

• Storage and Transportation Humidity:
10% to 95% RH

• Packaged Shock (Half Sine):
180 m/s2 (18 G), 6ms, 600 shocks

• Packaged Sine Vibration: 5 – 62 Hz @ Velocity 5mm/s, 62 –
500 Hz @ 0.2 G

• Packaged Random Vibration: 5 – 20 Hz @ 1.0 ASD w/-3dB/
oct. from 20 – 200 Hz 14 drops minon sides & corners @

39.4” (<15kg box)

EMI/EMC Standards

NORTH AMERICA EMC FOR ITE

• FCC CFR 47 part 15 Class A (U.S.A.)

• ICES-003 Class A (Canada)

EUROPEAN EMC STANDARDS

• EN 55022:2010 Class A

• EN 61000-3-2 2006+ A2: 2008 Class A iHarmonics)

• EN 61000-3-3 2008 (Flicker)

• EN 55024 2010

• ETSI EN 300 386: v1.6.1 2008+A2:2010 (EMC
Telecommunications)

• EN 61000-6-4: 2007+A1: 2011 (General Emissions for
Industrial, Scientific and Medical)

• EN 61000-6-2:2005 (General Immunity for Industrial,
Scientific and Medical)

• EN 50121-4:2006 (Emission and immunity of the signaling
for Railway Applications

• 2004/108/EC EMC Directive

INTERNATIONAL EMC CERTIFICATIONS

• CISPR 22:2010, Class A (International Emissions)

• CISPR 24 A2:2010(International Immunity) – IEC/EN 61000­4-2:2008 Electrostatic Discharge, 8kV Contact, 15kV Air,
Criteria A –IEC/EN 61000-4-3:2010 Radiated Immunity
20V/m, Criteria A

• IEC/EN 61000-4-4:2012 Transient Burst – Power AC, ± 2.0kV,
Criteria A

• Power DC, ± 2.0kV CM, 1kV DM, Criteria A – I/O Cables, ±

2.0kV for all I/O longer than 3m

• IEC 61000-4-5:2005/EN 61000-4-5:2006 Surge

Summit X430 Series – Data Sheet 3

Technical Specifications **

• AC Power, 1/2kV , Criteria A, test up to 2/4kV

• DC Power 1kV DM, 2kV CM, Criteria A

• I/O 1kV L-G, Criteria A

• IEC/EN 61000-4-6:2008 Conducted Immunity, 0.15-80MHz,
10V/m unmod. RMS, Criteria A

• IEC 61000-4-8:2009/EN 61000-4-8:2010 Magnetic
Immunity, Not applicable

• IEC/EN 61000-4-11:2004 Power Dips and Interruptions,
>30%, 25 periods, Criteria A

International EMC Standards

• VCCI Class A (Japan Emissions)

• RCM (Australia Emissions)

• CCC Mark (China Emissions)

• KCC Mark (Korea Approval)

• GOST-E (Russia)

Telecom Standards

• ETSI EN 300 386: V1.6.1 A2:2010 EMC Telecommunications

• ETSI EN 300 018 (Environmental for Telecommunications)

• MEE 9 compliant

• MEE 14 compliant

Warranty

• Ltd. Lifetime with express Advanced Hardware Replacement

• For warranty details, visit:

http://www.extremenetworks.com/go/warranty

Safety Standards

• UL 60950-12nd Ed., Lisited Devices (U.S.)

• CSA 22.2 #60950-1-03 wnd Ed. (Canada)

• Complies with FCC 21CFR1040.10 (U.S. Laser Safety)

• CDRH Letter of Approval (U.S. FDA Approval)

• En60950-1:2006+A11+A1+A12+country deviations

• EN60825-1:2007 (Lasers Safety) TUV-RGS Mark by German
Notified Body

• 2006/95/EC Low Volatage Directive

• AS/NZX 60950-1 (Australia/New Zealand)

**EXCEPT FOR THE SECTION TITLED “TECHNICAL SPECIFICATIONS” EXTREME
NETWORKS MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO ANY
OTHER DATA CONTAINED IN THIS DATA SHEET INCLUDING ANY (A) WARRANTY
OF MERCHANTABILITY; OR (B) WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE;WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING,
COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE.

IEEE 802.3 Media Access Standards

• IEEE 802.3ab 1000BASE-T

• IEEE 802.3z 1000BASE-X

• IEEE 802.3at PoE Plus

Environmental Standards

• EN/ETSI 300 019-2-1 v2.1.2 - Class 1.2 Storage

• EN/ETSI 300 019-2-2 v2.1.2 - Class 2.3 Transporation

• EN/ETSI 300 019-2-3 v2.1.2 - Class 3.1e Operational

• EN/ETSI 300 753 (1997-10) - Acoustic Noise

• ASTM D3580 Random Vibration Unpackaged 1.5G

• RoHS 6 compliant

• China RoHS compliant

• WEEE Compliant

Summit X430 Series – Data Sheet 4

External Ports

SWITCH MODEL PORTS

Summit X430-8p

Summit X430-24p

Summit X430-24t

Summit X430-48t

• 8 x 10/100/1000Base-T PoE (RJ45)

• 2 x100/1000BASE-X (SFP) unpopulated ports

• 1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port

• 24 x 10/100/1000Base-T PoE (RJ45)

• 4 x100/1000BASE-X (SFP) unpopulated ports

• 1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port

• 24 x 10/100/1000BASE-T (RJ45)

• 4 x 100/1000BASE-X (SFP) unpopulated ports

• 1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port

• 48 x 10/100/1000Base-T (RJ45)

• 4 x 100/1000BASE-X (SFP) unpopulated ports

• 1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port

Fan Acoustic Noise

SWITCH MODEL LOW SPEED HIGH SPEED

DB(A) SOUND PRESSURE (LPA) DB(A) SOUND PRESSURE (LPA)

Summit X430-8p 0 dB(A) (no fan) 0 dB(A) (no fan)

Summit X430-24t 41 49

Summit X430-24p 41 53

Summit X430-48t 38 50

Note: Sound pressure is measured in accordance with ISO 7770:2010(E).

Power Specifications

SWITCH MODEL SWITCH POWER 802.3AT POE POWER TOTAL POWER

Summit X430-8p 24.2W

Summit X430-24t 28.7W N/A 28.7W

Summit X430-24p 55W 370W 425W

Summit X430-48t 55.9W N/A 55.9W

60W Default, 90W

Config Option for

Standalone Operation

84.2W

Power Connections

SWITCH MODEL

Summit X430-8p IEC 320 C14 IEC 320 C13/C14 Min 18A WG N/A

Summit X430-24t IEC 320 C14 IEC 320 C13/C14 Min 18A WG N/A

Summit X430-24p IEC 320 C14 IEC 320 C13/C14 Min 18A WG N/A

Summit X430-48t IEC 320 C14 IEC 320 C13/C14 Min 18A WG N/A

POWER SUPPLY

INPUT SOCKET

POWER CORD INPUT

PLUG/INPUT SOCKET

POWER SUPPLY

CORD GAUGE

REDUNDANT POWER

SUPPLY INPUT SOCKET

Summit X430 Series – Data Sheet 5

Protocols and Standards

A list of supported protocols and standards is available on the Extreme Networks website at:

http://www.extremenetworks.com/products/extreme-xos.aspx

PART NUMBER NAME DESCRIPTION

16515 Summit X430-8p 8 10/100/1000BASE-T PoE+, 2 1000BASE-X unpopulated SFP, 1 AC PSU, ExtremeXOS L2 Edge license

16516 Summit X430-24t 24 10/100/1000BASE-T, 4 1000BASE-X unpopulated SFP, 1 AC PSU, ExtremeXOS L2 Edge license.

16517 Summit X430-24p 24 10/100/1000BASE-T PoE+, 4 1000BASE-X unpopulated SFP, 1 AC PSU, ExtremeXOS L2 Edge license

16518 Summit X430-48t 48 10/100/1000BASE-T, 4 1000BASE-X unpopulated SFP, 1 AC PSU, ExtremeXOS L2 Edge license.

16524

16525 Summit X430-8p Mounting Kit

10051H 1000BASE-SX SFP, Hi 1000BASE-SX SFP, MMF 220 & 550 meters, LC Connector, Industrial Temp

10052H 1000BASE-LX SFP, Hi 1000BASE-LX SFP, LC Connector, Industrial Temp

10053H 1000BASE-ZX SFP, Hi 1000BASE-ZX SFP, SMF 70 km, LC Connector, Industrial Temp

10056H 1000BASE-BX-D SFP, Hi 1000BASE-BX-D SFP, SMF (1490nm TX/1310nm RX Wavelength), Industrial Temp

10057H 1000BASE-BX-U SFP, Hi 1000BASE-BX-U SFP, SMF (1310nm TX/1490nm RX Wavelength), Industrial Temp

10060 100FX/1000LX SFP

10063 100FX SFP 100FX SFP, MMF, LC Connector

10064 1000BASE-LX100 SFP 1000BASE-LX100 SFP, Extra Long Distance SMF 100 km/30dB Budget, LC Connector

10065 10/100/1000Base-T SFP 10/100/1000BASE-T SFP module, Category 5 cable 100m link, RJ45-Connector

10067 100BASE-FX SFP 100M SFP, 100FX MMF, (1310nm, 2km multimode transmission) LC connector

10066 100BASE-LX10 SFP 100M SFP, 100LX10 SMF, (1310nm 10km single mode transmission) LC connector

10058 100BASE-BX-D SFP 100M SFP, 100BASE-BX-D, SMF (1550nm TX/1310nm RX wavelength), 100 Mbps

10059 100BASE-BX-U SFP 100M SFP, 100BASE-BX-U, SMF (1310nm TX/1550nm RX wavelength), 100 Mbps bidirectional

10071H 1000BASE-SX SFP 10 Pack, Hi 1000BASE-SX SFP 10 Pack, Industrial Temp

10072H 1000BASE-LX SFP 10 Pack, Hi 1000BASE-LX SFP 10 Pack, Industrial Temp

Summit X430 Multimedia

(AVB) Feature Pack

ExtremeXOS Audio Video Bridging Feature Pack for Summit X430 series switches - Maximum of 100 active
streams on no more than eight ports

Special “Keep Out” Rack Mounting Kit for the X430-8p Switch that reserves 2RU space for
adequate cooling

100FX/1000LX SFP, SMF, LC Connector (Requires MCP and 6dB Attenuator for
100FX-MMF Operation)

POWER CORDS

In support of the Extreme Networks Green initiatives, power cords can be ordered separately but need to be specified at the time order.

Please refer to www.extremenetworks.com/product/powercords/ for details on power cord availability for this product..

http://www.extremenetworks.com/contact Phone [phone]

©2017 Extreme Networks, Inc. All rights reserved. Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of Extreme Networks, Inc.
in the United States and/or other countries. All other names are the property of their respective owners. For additional information on Extreme Networks Trademarks
please see http://www.extremenetworks.com/company/legal/trademarks. Specifications and product availability are subject to change without notice. 1906-0417-25

WWW.EXTREMENETWORKS.COM

Summit X430 Series – Data Sheet 6