Extech PRT200 Data sheet

Specifications subject to change without notice.
Copyright © 2011 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.

www.extech.com

07/20/11 - R1

Checks phase sequence and phase status

Tests up to 1000VAC with LED and audible indication

Non-Contact Phase Sequence Tester

Ordering Information:

PRT200 ........Non-Contact Phase Sequence Tester

Features:

• 75 to 1000VAC input voltage with 45 to 65Hz frequency range

• LEDs indicate phase orientation (clockwise or counter-clockwise)

and whether each phase is live

• Beeper sounds intermittently when correct phase is detected and

continuously if phase is reversed

• Durable housing with back cover magnet for attachment to an AC

distribution panel for easy measurement

• Adjustable Hi/Lo LED brightness switch for making measurements in

dimly lit areas or sunlight

• Fully insulated alligator clips with wide jaws

• Low battery warning

• CAT IV-600V safety rating

• Dimensions: 4.7 x 2.7 x 1.5" (118 x 69 x 38mm);

Weight: 13oz (370g)

• Complete with three built-in 30" test leads with large color-coded

alligator clips, four AA batteries, and pouch case