Ordering Information:
PRC70 ............Multifunction Calibrator
PRC70-NIST ..PRC70 with NIST Certificate
Specifications subject to change without notice.
Copyright © 2010 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
www.extech.com
7/7/11 - R1
Features:
• Simultaneously source excitation voltage and measure
mA output of 2-wire transmitters
• Source 0 to 22mA with 1μA resolution
• Measure 0 to 50mA (1μA resolution)
• Select Type R, S, J, K, T, E, N, or B thermocouple and
RTD (Pt100, Pt1000) for precision calibrations in °F/°C
• Output 0 to 100mV, 0 to 1V, or 0 to 10.0000V
• Measure 0 to 50.00V
• Single/continuous step function for Voltage and Current
• Self-contained 24V loop power supply drives
current loads up to 1000Ω
• Complete with four AAA batteries and test leads
Precision Simultaneous Source and Measure
For thermocouples (Types R, S, J, K, T, E, N and B), RTD, mA, mV, V, Hz,
and Ω devices
Multifunction Process Calibrator
Specifications Range Accuracy
Source
Current 0.000 to 22.00mA ±(0.02% of reading ± 0.02%Range)
Voltage -1.0000V to 11.0000V ±(0.02% of reading ± 0.01%Range)
Resistance 0.00 to 40.000KΩ ±(0.02% of reading ± 0.025%Range)
Type J -328 to 2192°F (-200 to 1200°C) ±1.2°F or 0.7°C
Type K -328 to 2501°F (-200 to 1372°C) ±1.6°F or 0.9°C
RTD (Pt100) -328 to 1472°F (-200 to 800°C) ±1.4°F or 0.8°C
Frequency 1.00Hz to 110kHz ±2 digits
Pulse 1.0 to 100000 cycles ±2 digits
Switch (open/close) 1.00Hz to 110kHz ±2 digits
Loop Power 24V ±10%
Max. Load 1000 @ 20mA
Measure
Current -5.000 to 55.000mA ±(0.02% of reading ± 0.01%Range)
Voltage -5.000mV to 55.00V ±(0.02% of reading ± 0.01%Range)
Resistance 0.00 to 5.5000kΩ ±(0.05% of reading ± 0.02%Range)
Type J -76 to 2192°F (-60 to 1200°C) ±1.8°F or 1.0°C
Type K -148 to 2501°F (-100 to 1372°C) ±2.1°F or 1.2°C
RTD (Pt100) -328 to 1472°F (-200 to 800°C) ±1.4°F or 0.8°C
Frequency 3Hz to 50.000kHz ±2 digits
Continuity <50Ω
Dimensions/Weight 8 x 3.7 x 1.7" (205 x 95 x 42mm)/1.1lbs (500g)