2-Channel Digital Oscilloscopes
5.6" (142mm) color LCD display
Makes viewing multiple waveforms easy
Features:
• Three models to choose from:
- Model MS6060 — 60MHz bandwidth
- Model MS6100 — 100MHz bandwidth
- Model MS6200 — 200MHz bandwidth
• One-touch automatic setup optimizes the position,
range, timebase, and triggering to assure a stable
display of virtually any waveform
• Easy-to-use pop-up menu with built-in multi-language
help system
• 23 Automatic Measurements
• Waveform Math: Add, Subtract, Multiply, and Divide
• Store and recall up to 1000 waveform screens
and setups using the installed 2G microSD card
• Automatic cursor tracking measurements
• XY Mode
• Built-in FFT function converts a time-domain signal into
its frequency components to measure harmonic content
and distortion in systems
• Waveform Recorder to capture/replay input waveforms
from CH1 and CH2 with a maximum record length of
1000 frames
• Pass-Fail function compares a stored waveform
to an unknown input
• Average Mode for smoothing waveforms
• Square Wave Output (2V, 1kHz) for probe adjustment
• 6,000 count MultiMeter with analog bargraph
• USB interface and software for transferring waveforms
and data
• Complete with two 1X/10X oscilloscope probes, test
leads, Windows
®
compatible software and USB cable,
7.4V Li-Ion battery, universal AC adaptor/charger, and
case
Ordering Information:
MS6060..........60MHz Dual Channel Digital Oscilloscope ......................................
MS6100..........100MHz Dual Channel Digital Oscilloscope ....................................
MS6200..........200MHz Dual Channel Digital Oscilloscope ....................................
BATT-74V ......7.4V Li-Ion Replacement Battery ....................................................
TL620 ............1X/10X 200MHz Oscilloscope Probe ..............................................
TL625 ............High Voltage Oscilloscope Probe 100MHz, 2000V ..........................
Specifications MS6060 MS6100 MS6200
Bandwidth 60MHz 100MHz 200MHz
Sample rate per channel 500MS/s 500MS/s 500MS/s
Risetime 5.8ns 3.5ns 1.8ns
Glitch Capture 8ns 2.5ns 2.5ns
Common Features/Functions
Oscilloscope Functions
Record Length 1M points per channel
Display Size 5.6" (142mm) color LCD; 640 x 480 pixels
Channels 2
Vertical Sensitivity 2mV to 5V/div
Vertical Resolution 8 bits
Timebase Range 2ns to 2000s/div
Sample Mode Normal, Average, Peak Detect
Trigger Modes Edge, Pulse, Alt, Video
Trigger Source CH1, CH2
Trigger Coupling AC, DC
Input impedance 1MΩ/15pF
Max Input Voltage 300V (peak)
Cursor Measurement Voltage and time; Delta (CH1-CH2)
True RMS MultiMeter Functions
AC Voltage 60mV, 600mV, 6V, 60V, 600V
DC Voltage 60mV, 600mV, 6V, 60V, 600V, 800V
AC/DC Current 60mA, 600mA, 10A
Resistance 600Ω, 6kΩ, 60kΩ, 600kΩ, 6MΩ, 60MΩ
Capacitance 5nF to 400µF
Diode and Continuity Yes
PC Interface USB cable
Power Supply 3 hours Li-ion rechargeable battery; AC Adaptor/Charger
Dimensions/Weight 9.6 x 6.4 x 2" (245 x 163 x 52mm) / 2.6lbs (1.2kg)
PRELIMINARY
DATASHEET
www.extech.com
Specifications subject to change without notice.
Copyright © 2010 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
6/7/11 - R1