Extech MP510 Data Sheet

Applications:

• True RMS is ideal for voltage and current

measurements of distorted waveforms in office and industrial locations

• Wide bandwidth for audio frequency and

digital electronic production test and repair

• Monitor, display and store data

using the optional PC software

Additional Features Model MP530:

• True RMS measurements

for AC Voltage and Current

• °F/°C Temperatur e function

• Relative, Min, Max,

Max-Min and 5ms Peak hold

• Analog bargraph Zoom provides

5x resolution to detect small signals (updates 60/sec)

Model MP510

• 0.08% Basic

DC Accuracy

Features:

• High basic DC Voltage accuracy of 0.08%

• Wide AC Voltage bandwidth of 40Hz to 20kHz

• Rugged design with protective holster

and water resistant housing

• Optically isolated RS-232 PC interface

with Windows®95/98/NT/2000/ME/XP compatible software (optional) allows user to collect, display, plot, save or export data or graphs

• Backlit 5000 count LCD display for

high resolution (0.01mV, 0.1µA,

0.01, 0.01nF, 0.001Hz)

• Smart auto power off is disabled if

signal is present at test leads

• Hold and low resistance auto-lead zero

• Measurement functions include

AC/DC Voltage and Current, Resistance, Frequency, Capacitance, Diode and Continuity

• Complete with built-in stand, CAT. III

test leads, protective holster, 9V battery and temperature probe (-58 to 482°F/-50 to 250°C) for MP530

Ordering Information:

MP510..............MultiPro™Professional MultiMeter

MP510-NIST....MultiPro™Professional MultiMeter with NIST Certificate

MP530..............MultiPro™True RMS Professional MultiMeter w/ Temp

MP530-NIST....MultiPro™True RMS Professional MultiMeter w/ Temp

SW800..............MultiPro™Software Diskette and RS-232 Cable

TP872...............Spare bead wire Temperature Probe

TL805...............Spare set of CAT. III - 1000V Test Leads

TL807...............Set of Alligator Clips (2pk)

CA899 ..............Vinyl Pouch Carrying Case

FS880...............Spare Fuse

Specifications Range Max. Resolution Basic Accuracy

(%rdg+digits)

DC/AC Voltage: 50mV,500mV,5V, 0.01mV ±(0.08%+2d) DC

50V,500V,1000V ±(0.5%+3d) AC

DC/AC Current: 500µA,5000µA, 50mA, 0.1µA ±(0.2%+4d) DC

500mA, 5A, 10A ±(0.6%+3d) AC

Resistance (Ω): 50, 500k, 5k,50k, 0.01Ω ±(0.1%+2d)

500k, 5M, 50M

Capacitance: 50nF ,500nF, 5µF, 0.01nF ±(0.8%+3d)

50µF, 500µF, 9999µF Frequency: 0.001Hz to 125kHz 0.001Hz ±(0.01%+2d) Temperature: -58 to 1832°F 1°F/°C ±(0.3%+3d) (MP530 only) (-50 to 1000°C ) Dimensions/ Wt: 7.32 x 3.42 x 1.39" (186 x 87x 35.5mm) / 0.75lb (340g)

All models include Double injection molded CAT. III - 1000V Test Leads for safety, better grip and added durability.

MultiPro™Series Professional MultiMeters

High Performance Autoranging Digital MultiMeters with RS-232 PC Interface

EXTECH INSTRUMENTS CORPORATION

285 Bear Hill Road, Waltham, MA 02451-1064 Phone: 781-890-7440 • FAX 781-890-7864

04/04/05 - R2

ISO 9001:2000 CERTIFIED

Product

DATASHEET

CAT IV - 600V

“Make mine an Extech!™”

www.extech.com

FUNCTION RANGE ACCURACY (% rdg + digits) NOTES

DC Voltage: 50.00mV ±(0.12% + 2d) Input Impedance: 10MΩ

500.0mV ±(0.06% + 2d) Input protection; V;1050Vrms, mV; 600VDC/AC

5.000V ±(0.08% + 2d)

50.00V ±(0.08% + 2d)

500.0V ±(0.08% + 2d) 1000V ±(0.08% + 2d)

AC Voltage: 50.00mV ±(0.5% + 3d) Input Impedance: 10MΩ

500.0mV ±(0.5% + 3d) Stated specification at 50/60Hz (wider specs at 40Hz to 20kHz)

5.000V ±(0.5% + 3d) True RMS (MP530)

50.00V ±(0.5% + 3d) Input protection; V;1050Vrms, mV; 600VDC/AC

500.0V ±(0.5% + 3d) 1000V ±(0.5% + 3d)

DC Current: 500.0µA ±(0.2% + 4d) Burden voltage; 0.15mV/µA, 3.3mV/mA, 0.03V/A

5000µA ±(0.2% + 4d) On 10A range, 20A for 30 seconds with 5 minute cool down

50.00mA ±(0.2% + 4d) Input protection; µA/mA 1A/240V fuse, A 13A/240V fuse

500.0mA ±(0.2% + 4d)

5.000A ±(0.2% + 4d)

10.00A ±(0.2% + 4d)

AC Current: 500.0µA ±(0.6% + 3d) Stated specification @ 50/60Hz (wider specs at 40Hz to 1kHz)

5000µA ±(0.6% + 3d) On 10A range, 20A for 30 seconds with 5 minute cool down

50.00mA ±(0.6% + 3d) True RMS (MP530)

500.0mA ±(0.6% + 3d) Input protection; µA/mA 1A/240V fuse, A 13A/240V fuse

5.000A ±(0.6% + 3d)

10.00A ±(0.6% + 3d)

Resistance: 50.00Ω ±(0.2% + 6d) Open circuit voltage:<1.3VDC

500.0Ω ±(0.1% + 3d) (<3VDC on 50Ω &500Ω ranges)

5.000kΩ ±(0.1% + 2d) Input protection; 600VDC/AC

50.00kΩ ±(0.1% + 2d)

500.0kΩ ±(0.1% + 2d)

5.00MΩ ±(0.4% + 3d)

50.00MΩ ±(1.5% + 5d)

Capacitance: 50.00nF ±(0.8% + 3d) Accuracies stated for film capacitors or better

500.0nF ±(0.8% + 3d) Input protection; 600VDC/AC

5.000µF ±(1.0% + 3d)

50.00µF ±(2.0% + 3d)

500.0µF ±(3.5% + 5d)

9999µF ±(5.0% + 5d) Temperature: -58F to 1832°F ±(0.3% + 5d) Thermocouple range and accuracy not included (MP530 only) -50 to 1000°C ±(0.3% + 3d)

Frequency: Function Range Sensitivity Accuracy (%rdg + digits)

mV 10Hz to 125kHz 300mV ±(0.01% + 2d)

5V 10Hz to 125kHz 2V ±(0.01% + 2d)

50V 10Hz to 20kHz 20V ±(0.01% + 2d)

500V 10Hz to 1kHz 80V ±(0.01% + 2d)

1000V 10Hz to 1kHz 300V ±(0.01% + 2d)

Ω, Cx, diode 10Hz to 125kHz 300mV ±(0.01% + 2d)

µA, mA, A 10Hz to 125kHz 10%FS ±(0.01% + 2d)

Diode test: 2.000V ±(1% + 1digit) Open circuit voltage <3.5V, 0.8mA typical test current Continuity: Buzzer sounds between 20Ω and 200Ω, Response time <100µs Crest Mode: (for V&A) ±150 digits for changes > 5msec in duration Display: 5000 count LCD with backlighting and bargraph Update Rate: 5 per second, Bargraph; 60 per second Auto Power Off: After 17 minutes inactive Standards: IEC 1010, CAT IV- 600V Operating Temperature: 32 to 122°F (0 to 50°C) Storage Temperature: -4 to 176°F (-20 to 60°C) Relative Humidity: 80% (32 to 95°F/ 0 to 35°C), 70% (95 to 122°F/ 35 to 50°C) Power Supply: 9V alkaline battery Power consumption: 2.7mA typical Dimensions: 7.32 x 3.42 x 1.39" (186 x 87 x 35.5mm) Weight: 0.75lb (340g)