MO53 Pinless
Moisture Meter
Use Extech’s MO53 Pinless Moisture Meter for non-invasive
measurements on wood and other building materials with
virtually no surface damage. The depth of measurement is
approx <0.75" (20mm). Easy-to-operate with display icons that
indicate the levels of moisture content plus audible alert feature.
Ideal for building restoration projects and applications where
moisture detection on floors, tiles and under carpets is critical.
A must-have tool for analyzing the after-effects of water leakage
behind walls and in ceilings.
Features
Features
• Pinless moisture measurement depth to <0.75" (20mm)
• Measures Moisture up to 99.9% for Wood and 56.5%
for other building materials
• Displays moisture level in wood and building
materials such as wall board, sheet rock,
cardboard, plaster, concrete, and mortar
• Audible Alert — Tone rate beeps faster as the
moisture level increases
• Icons display low, medium and high levels of
moisture content
• Easy-to-use, compact-sized design
• Data Hold freezes reading on display
• Built-in battery level check and measurement
verification test
• Auto Power Off conserves battery power
• Complete with 9V battery and wrist strap
Specifications
Sensor Type Pinless sensor
Measurement Depth <0.75" (20mm)
Wood Moisture Range 0 to 99.9%
Other Building Materials 0 to 56.5%
Resolution 0.1%
Wood Moisture Icon Levels Low: 0.1 to 29.9%; Medium: 30.0 to 69.9%; High: 70.0 to 99.9%
Building Material Icon Levels Low: 0.1 to 13.9%; Medium: 14.0 to 41.9%; High: 42.0 to 56.5%
Dimensions/Weight 6.7x2.6x1.2" (170x65x30mm) / 4.2oz (120g) battery not included
PRODUCT DATASHEET
PRODUCT DATASHEET
Ordering
MO53 ................ Pinless Moisture Meter
Specifications subject to change without notice. Copyright © 2017 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form.
Rev. 10/18/17
UPC Code: 793950470534
www.extech.com