Ordering Information:
MO297................Pinless Moisture Psychrometer w/Memory + IR Thermometer
MO297-NISTL* ..MO297 with NIST Certificate
MO290-P ............Replacement Pin Moisture Probe
*NISTL is a Limited NIST: Product is certified to 33% & 75% Humidity and 77°F &150°F IR Temperature
Specifications subject to change without notice.
Copyright © 2010 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
www.extech.com
04/15/10 - R1
Features:
• Quickly indicates the moisture content of multiple
wood types and other building materials with
Pinless technology without damaging the surface;
Remote Pin-type probe (MO290-P included) allows
for contact moisture readings (3ft/0.9m cable length)
• Wireless communication with FLIR Thermal Imaging
Cameras (b60, i60, B-Series, and T-Series)
• Manually store/recall up to 20 labeled readings
• Easy to read, large dual display with automatic
backlight feature and Fast Analog Bargraph
• Simultaneously displays moisture value of wood
or material being tested, Air Temperature, IR
Temperature, or Humidity
• Pinless measurement depth to 0.75" (19mm)
below the surface
• Programmable high/low Moisture/Humidity alarms
• Designed with a patented IR circuit to measure
non-contact surface temperature
• Built-in Humidity/Temperature probe measures
Relative Humidity, Air Temperature plus Grains Per
Pound (GPP)/(g/kg), Dew Point (DP), Vapor
Pressure, and condensation point
• Automatic calculation of differential Temperature
(IR - DP) to determine condensation point
• Min/Max, Data Hold, and Auto power off
• Complete with pin moisture probe with cable,
9V battery and pouch case
Bluetooth Transmitter with MeterLink
™
Wirelessly transmits moisture and humidity data to your FLIR high-definition
infrared camera to incorporate meter readings with thermal images.
Pinless Moisture Psychrometer + IR Thermometer
Patented IR thermometer
design locates cold spots on
walls, which identifies surfaces
subject to condensation (direct
differential display of IR - DP)
Measure moisture of wall
material with non-invasive
Pinless technology
Pin Moisture Probe included
for making contact moisture
measurements
Specifications
Memory Manually Store/Recall 20 data readings
Pinless Moisture (Non-Penetrating) 0 to 99.9 (Relative); Depth up tp 0.75" (19mm)
Pin-type Moisture (probe included) 0 to 99.9%
Max Resolution 0.1, 0.1°F/°C
Humidity 0 to 100%RH
Temperature (Air) -20 to 170°F (-29 to 77°C)
Temperature (IR) -4 to 392°F (-20 to 200°C)
Vapor Pressure 0 to 20.0kPA
Dew Point -22 to 199°F (-30 to 100°C)
Mixing ratio 0 to 999GPP (0 to 160g/kg)
Field of View 8:1 Distance to Target ratio
Emissivity 0.95 fixed
Dimensions/Weight 6.5x2.8x1.5" (165x70x38)/7.4oz (210g)
METERLiNK frees the Thermographer
from the manual process of
collecting field data
Infrared cameras quickly locate moisture
related problems
Collecting moisture readings on damaged
surfaces and associating them with regions
on an infrared image can be a complicated
and cumbersome process
Manual data collection is time-consuming
and prone to errors. METERLiNK eliminates
this problem by allowing the thermographer
to quickly take moisture readings on a
damaged surface and associate those
readings with the corresponding targets
stored in an infrared image
Patented
Patented