Extech MO290-EK, AN100, AN200 Data sheet

Specifications subject to change without notice. Copyright © 2007-2008 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
www.extech.com
4/9/08 - R1
Large display of Airflow or Air Velocity
Plus model with built-in InfraRed Thermometer
CFM/CMM Thermo-Anemometer + IR Thermometer
Ordering Information:
AN200 ..........................CFM/CMM Thermo-Anemometer + IR Thermometer
Features:
Model AN100 — CFM/CMM Thermo-Anemometer
Model AN200 — CFM/CMM Thermo- Anemometer
with built-in non-contact IR Thermometer measures remote surface temperatures to 500°F (260°C) with an 8:1 distance-to-spot ratio and Laser Pointer
Simultaneous display of Ambient Temperature and
Air Flow or Air Velocity
Up to 8 easy to set Area dimensions (ft 2 or cm2) are
stored in the meter’s internal memory
20 point average function for Air Flow
Super large LCD Backlit Display
3% velocity accuracy via low friction 2.83"D (72mm)
ball bearing vane wheel on 3.9ft (120cm) cable
Data Hold and MIN/MAX
Auto Power off
Complete with vane sensor with 3.9ft (120cm) cable,
9V battery, protective rubber holster, and carrying case
Applications:
HVAC installation, repair, diagnostics, and optimization.
Fume hood testing, installation, and verification
Ventilation system installation, servicing, and analysis
Environmental wind and temperature testing/analysis
Boiler rooms
Ionizer flow output monitoring
Automobile aerodynamic testing
Plant/Facilities Maintenance
AN100 and AN200 used in HVAC applications measuring airflow from heating vents.
Model AN200 features built-in non-contact IR Thermometer to measure surface temperature that may be hard to reach
Specifications Range Resolution Basic Accuracy
Air Velocity 0.40 to 30.00 m/s 0.01 m/s ±3% m/s
1.4 to 108.0 km/h 0.1 km/h ±3% km/h 80 to 5906 ft/min 1 ft/min ±3% ft/min
0.9 to 67.2 mph 0.1 mph ±3% mph
0.8 to 58.3 knots 0.1 knots ±3% knots Air Temperature 14 to 140˚F (-10 to 60˚C) 0.1˚F/˚C ±6.0˚F (3˚C) InfraRed Temperature -58 to -4˚F (-50 to -20˚C) 0.1˚F/˚C ±9.0˚F (5.0˚C) (AN200 Only) -4 to 500˚F (-20 to 260˚C) 1˚F/˚C ±2% reading or
±2˚F (˚C) whichever is greater
Airflow 0 to 9999 CMM (m
3
/min) 0.1
0 to 9999 CFM (ft3/min) 0.1
Dimensions/Weight 7 x 2.9 x 1.3" (178 x 74 x 33mm)/1.6lbs (700g)
Loading...