Extech MO230 Data sheet

Ordering Information:

MO230............Pocket Moisture Meter

MO200-PINS ..Replacement pins (50 pins)

www.extech.com

Measures Moisture of wood and building materials. Built-in battery check and measurement verification test to insure accurate readings. LCD screen is optimized for a 30 degree viewing angle.

8/30/12 - R1

Features:

• Unique Digital LCD readout with analog bargraph

and numerical displays

• Simultaneous digital readout of moisture content plus ambient

temperature or humidity with analog bargraph display of moisture, Max moisture values, and programmable wet/dry indication

• Use on wood, paper, wall board, sheet rock, cardboard, plaster,

concrete, and mortar

• Memory contains 3 wood groups and 4 building material

groups with calibrations for approximately 150 species of wood and 19 building material types

• Index Mode with programmable high and low values can be

used to quickly locate moisture with comparative measurement

• Replaceable threaded measurement electrode pins

• Impact proof housing

• Auto power off conserves battery energy

• Battery operated for on-the-go measurements

• Built-in battery check and measurement verification test

• Complete with protective cap, replacement pins,

and three CR-2032 button batteries

Large Dual Graphical LCD

Displays moisture in wood and other building materials plus Air Temperature and

Relative Humidity

Pocket Moisture Meter

Specifications

Wood Moisture Range 0 to 75% Other Building Materials 0.1 to 24% Temperature -40 to 158°F (-40 to 70°C) Relative Humidity 0 to 100%RH Measurement principle Electrical resistance Electrode length 0.3" (8mm) Electrode pins Integrated, replaceable Auto Power Off After approx. 3 minutes Operating Temperature 32 to 104°F (0 to 40°C) Operating Humidity 85% Relative Humidity maximum Power supply Three CR-2032 button cells Dimensions 6.25 x 2.5 x 1.2" (159 x 63.5 x 30.5mm) Weight 3.5 oz (100g)