Extech DCP36 Specifications
DCP36 80W Switching Mode
DC Power Supply
Extech’s DCP36 power supply has 80W
constant power topology and has autoranging
Voltage and Current output. This compact and
lightweight unit provides easy portability, and
is ideal for tight workbenches with limited
space. It features 4-Digit LED displays,
3-programmable presets, front/rear output
terminals, and remote sensing for accurate
applied voltage at load point.
Features
• 80W Constant Power Topology with 0.5 to 36V and
0 to 5A autorange output
• Dual 4-digit LED displays with 10mV and 10mA
resolution
• Lower display indicates Current or Watts
• Constant Voltage or Current
• 3 user programmable presets for frequently
used settings
• Upper voltage and current limit setting to protect
UUT (Unit Under Test)
• Output on/off switch with Power Up Output
On or Off status setting
• Remote Sensing for accurate applied voltage
at the load point
• Front/Rear output terminals
• Lock/Unlock front panel
• Parallel connection to other units for
Master/Slave control
• Compact slim tower housing is ideal for
tight work bench
• Lightweight for easy portability
• Complete with RJ11 cable, alligator clip test leads, an
RJ11 terminator plug, and a standard North American
(Type B) 3-prong plug AC power cord - please note it
may be required to order a different AC power cord to
be used in different countries
Specifications
Voltage/Current 0.5 to 36V/0 to 5A; Autoranging with 80W maximum output power (E x I = ≤80W)
Accuracy ±(0.5% + 5 counts)
Ripple & Noise ≤35mVpp
Line Regulation ≤4mV/≤10mA
Load Regulation ≤30mV/≤10mA
Dimensions/ Weight 13 x 5 x 2" (330 x 127 x 53.5 mm)/ 4.2 lbs (1.9 kg)
PRODUCT DATASHEETPRODUCT DATASHEET
Ordering
DCP36 .................80 Watt Switching Mode DC Power Supply (with North American 3-prong Plug)
PWRCORD-EU .....AC Power Cord with VDE approved schuko plug (two rounded pins)
PWRCORD-UK ....AC Power Cord with UK plug BS1363 (three flat pins, grounded)
Specifications subject to change without notice. Copyright © 2019 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form.
Rev. 4/8/19
DCP36 UPC Code: 793950383360
www.extech.com
Loading...