Extech CT40 Data Sheet

Specifications subject to change without notice.
Copyright © 2009 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.

www.extech.com

6/23/09 - R1

Identify up to 16 local or installed lines

And troubleshoot electrical/electronic circuits

16-Line Cable Identifier/Tester Kit

Specifications

Display Counts 2,000 count
Basic Accuracy 1.0%
DC/AC Voltage 0.1mV to 600VDC

1mV to 600VAC
DC/AC Current 0.1μA to 200mA
Resistance 0.1Ωto 20MΩ
Diode/Continuity Yes
Dimensions 6.3x2.9x1.7"(162x74.5x44mm)
Weight 10.8oz (308g)

Transmitter

Display Two red LED lamps
Test Leads 17 alligator clips (16 red and 1 black (ground))
Cable resistance 30kΩ max

Receiver

Display Two digit blue LED display
Test Leads 2 alligator clips (1 red and 1 black)

Features:

• Transmitter/Receiver enables one person to

remotely identify up to 16 wires

• Wire voltage check from 5 to 16VDC

• MultiMeter functions include: AC/DC Voltage and

Current, Resistance, Diode, and Continuity

• Data Hold and Max Hold

• Auto power off

• Low battery indicator (transmitter and receiver)

• CAT III-600V safety rating

• Complete with 16-line Transmitter, MultiMeter/

Receiver, two 9V batteries, pouch case, and
2 AAA batteries

Ordering Information

CT40 ................Cable Identifier/Tester Kit