Extech CO30 Specifications

CO30 Carbon Monoxide
(CO) Monitor
The Extech CO30 displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity. Programmable audible alarm, with high decibel beeper, sounds when CO concentration rises to unsafe levels. Can be wall mounted or used on a desktop close to areas of concern.
Common Areas to Monitor CO Levels:
- Office buildings and conference rooms
- Boats, planes, and RVs
- Indoor work places such as warehouses that use propane- and gasoline-powered fork lifts
- Manufacturing plants of temporary heating units and gasoline-powered appliances
Features
Features
Alternately displays Carbon Monoxide (CO)
concentration, Air Temperature, and Relative Humidity
readings (cycles approximately every 6 seconds)
Visible bright tri-colored LED indicator: Green <10ppm,
Yellow = 10 to 29ppm, and Red >30ppm
LCD displays alarm icon, LED light turns red, and loud
audible beeper sounds when indoor CO level exceeds
set point (defaults at 30ppm — adjustable); beeper can
be temporarily turned off for false alarm
Adjustable audible alarm sounds when reading
exceeds one of the selected ranges: 25ppm, 30ppm,
35ppm, 50ppm, 100ppm or 200ppm
“ZERO” Re-Calibration function
Manual Temperature and Relative Humidity
Compensation (adjustable)
CO Calibration function in fresh air
Four display error codes for troubleshooting
Low battery indicator
Recover to factory setting function
Complete with built-in stand, side cover, Universal AC
Adaptor (multi-plugs US, EU, UK, and AU), and 4 AAA
batteries
<10ppm Normal
=10 to 29ppm Caution
>30ppm Danger
Bright Tri-colored LED Indicator for CO Level
Specifications
Carbon Monoxide (CO) 0 to 999ppm 1ppm ±5% of reading or ±10ppm
Temperature (Air) 32 to 122°F (0 to 50°C) 0.1°F/°C ±2°F/1°C
Relative Humidity 20 to 90%RH 1%RH ±5%RH @ 25°C
Dimensions/ Weight 4.4x4.3x2.1" (113x108x53mm)/ 5.6oz (159g)
Range Resolution Basic Accuracy
Ordering
PRODUCT DATASHEET
PRODUCT DATASHEET
CO30 ................ Carbon Monoxide CO Monitor
NOTE: The CO30 Carbon Monoxide Monitor is intended for general purpose Air Quality monitoring only, and has not been certified for use pursuant to any state or city safety Carbon Monoxide Alarm or Monitoring requirements.
The CO30 Carbon Monoxide Monitor has not been tested by an independent lab to comply with UL 2034 or IAS 6-96 standard. It is the responsibility of the customer to obtain and apply current local, state, and national regulations with regard to CO alarms, monitoring and testing.
Specifications subject to change without notice. Copyright © 2014-2015 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form. Rev. 3/11/15
UPC Code: 793950500309
www.extech.com
Loading...