®
Quick Install Guide
Supports UV 12 and UV 16
A USB VGA Display Port
EVGA’s UV Plus+ gives you the ability to use multiple displays by utilizing a
USB 2.0 port on your laptop or PC. Each monitor will need either a UV 12 or
UV 16 and up to 6 UV Plus+ devices can be used at the same time allowing
multiple displays through CRT and LCD monitors, or a Projector. With the
ability to Mirror or Extend your desktop up, down, left, or right, EVGA’s UV
Plus+ gives you full freedom to move about your virtual work space.
• USB 1.1 is supported (USB 2.0 is recommended)
• Windows
®
2000 SP4, XP SP2 32-Bit, or Vista 32-Bit
• CD-ROM or DVD-ROM if using the provided installation CD
• 30 MB of free disk space
• 1.2 GHz or higher processor
• 512 MB of system memory (1 GB or more is recommended)
Introduction
Package Contents:
Your EVGA UV Plus+ device will have the following
optional items included in this package:
1 x This Printed Install Quick Guide
1 x DVI to VGA Adapter
1 x USB Cable
1 x Installation CD for Drivers and Software
1 x Carrying Case
System Requirements:
UVPlus+ Supports:
Windows Vista Aero
32-Bit Color Depth
Widescreen Aspect Ratio
Ability to Clone or Extend
VGA, DVI, and FPI Display Connections
High-Defi nition Displays
The Following Resolutions
are Supported:
Resolutions may vary depending on your displays capabilities.
• 800x600, 1024x768, 1152x864, 1280x720, 1280x1024, 1440x900,1400x1050
Supported on both UV 12 & 16
• 1600x1200, 1680x1050
Supported by UV 16 model only
UV 12
UV 16
DVI to VGA Adapter
DVI connection
1 – Power on your Laptop or your monitor and PC to begin the installation.
2 – Once in Windows, install the UV Plus+ drivers from the provided
installation CD. After the installation process has fi nished reboot
your computer.
3 – Attach your monitor’s DVI connector to UV Plus+ (a DVI to VGA
adapter is provided if needed)
4 – Plug in the provided USB cable to UV Plus+ and the other end to your
Notebook or PC’s USB port. The UV Plus+ software will now detect
your attached display.
5 – Right-click the EVGA icon in the Windows System Tray to confi gure how
the attached monitor should display.
Hardware and Driver Setup:
A DVI to VGA Adapter is provided to allow a VGA connection to the
UV Plus+ DVI connection.
FAQ
Question: Will the UV Plus+ attached monitor render full 3D hardware rendered
graphics when in Mirror or Extended Modes?
Answer: Yes, full 3D hardware rendered graphics can be displayed while in Mirror or
Extended Modes, however running in such a confi guration is limited as the application in use may become slower or not as responsive.
Question: Discoloration and constant fl ickering occurs through the UV Plus+
attached monitor.
Answer: Check that your monitor’s cable is properly attached and check for loose or
faulty cables. If the problem continues, please contact EVGA Support at (888)-880EVGA(3842)
Question: Why do I experience lag and delay when playing a 3D hardware accelerated game in either Mirrored or Extended mode?
Answer: USB 2.0 is limited to a 480Mbps transfer speed and because of this limitation only so much data can pass through at one time. This causes a delay that can
both be seen and felt when playing a game when using the UV Plus+ device.
Question: How many monitors are supported when using UV Plus+?
Answer: The maximum amount of monitors supported is 6. Note that due to current
driver limitations, only a maximum of 4 monitors can be used with an NVIDIA
®
based
graphics card.
Question: How can I stay updated with the latest UV Plus+ software releases?
Answer: The UV Plus+ software that installs on to your computer has a built in Auto
Update feature which will automatically check for any updates and then prompt you
accordingly. You can right click the UV Plus+ icon in the Windows System Tray and
select Updates to either confi gure how your computer updates or to manually check
for an update.
Question: How do I uninstall UV Plus+ software?
Answer: In Vista click Start Control Panel Uninstall a program Select EVGA UV
Plus+ and select Uninstall.
In XP or 2000 click Start Settings Control Panel Add or Remove
Programs Select EVGA UV Plus+ and select Uninstall.
Question: Why does my UV Plus+ attached monitor not display anything when my
computer is booting up or in a DOS based environment?
Answer: UV Plus+ will only activate in a Windows based environment. Signal will
be passed to your UV Plus+ attached monitor when the UV Plus+ software has fully
loaded as part of the Windows startup process.
Loading...