EverFocus EDR HD-4H4 User Manual
Operating elements
SEQ:
Press this key to enter the auto sequential switching mode. The sequence dwell
1
2345678910
Remote Control Receiver: Receiver for IR remote control
1
Channel keys 1~8: Press channel key (CH1~CH8) to display that channel in full
2
screen view.
3
DVD Eject: Press this button to eject the DVD.
View: Press this key to switch between 4x, PiP (Picture In Picture), full screen, 9x,
4
6ch, 7ch and 8ch.
5
time can be set in “Display Setting” tab of the Menu.
6
Display: Press this key to switch display of channels and status bar.
Monitor: Switch between Main monitor and Call monitor
7
EDR HD-4H4 Quick Reference Guide
Menu/ESC: Press this key to enter/exit MAIN SETUP MENU
14
15
DVD burner: DVD+RW burner
16
►►/I►: Fast Forward playback or step forward playback depending on playback mode
17
►/ I I: Forward playback or pause
18
■■■■
: Stop playback
I I / ◄: Reverse playback or pause
19
◄I /◄◄: Fast reverse playback or step reverse playback depending on playback mode
20
USB ports: For connecting USB-Flash-Drive to copy/archive video or for firmware upgrades
21
Description of on-screen main menu (control bar)
110Express menu (manual chapter 4.2)
Camera menu (manual chapter 4.3)
2
Zoom: In full screen mode, 2x electronic zoom. Zoom screen can be moved through
8
arrow keys. Pressing the zoom key again switches the electronic zoom off.
Menu Navigation Keys: Instead of or in combination with a mouse, you can use these
9
keys to change the Menu settings.
10
Copy: Press this key to enter Copy Menu
JOG/SHUTTLE: Shuttle (outer wheel): In playback mode, use the SHUTTLE for fast
11
forward / fast reverse playback.
JOG (inner wheel): In PAUSE mode, use the jog to move frame by frame. Within
menu functions, use the jog to adjust the values / parameters. Use Jog to highlight
individual cameras. Use either Shuttle or Jog to switch between MENU parameters.
System LED
12
POWER: LED indicating power on
HDD: LED indicating HDD active
Alarm: LED indicating Alarm active
Network: LED for network traffic
Record: LED indicating Record active
13
Search: Press this key to enter Search Menu
3
Record & Play menu (manual chapter 4.4)
4
Alarm & event menu (manual chapter 4.5)
5
Schedule menu (manual chapter 4.6)
6
Network menu (manual chapter 4.7)
Disk menu (manual chapter 4.8)
7
8
Display menu (manual chapter 4.9)
9
System menu (manual chapter 4.10)
Information menu (manual chapter 4.11)
P/N:4605PCOR16B010A
EDR HD-4H4 Quick Reference GuideOperation
3. Brightness
–
contrast
–
color
at the selected position.
1. Monitor display formats
The monitor allows full screen, picture-in-picture, 4x, 9x, 1x, 6ch, 7ch and 8ch multiscreen
display (PiP in live mode only) as well as sequence view.
Display format switching
Repeated VIEW key actuation switches between the display formats mentioned above.
Full screen:
Select one of the channel keys 1 ~ 8.
Sequence (automatic switch, available in live mode only)
Press the SEQ key to start / stop the automatic switching mode.
2. Menu start
Press the MENU key to access the main menu bar (front key no. 14). Control the menu
either through mouse or through the menu navigation keys (front keys no. 9) or through
the Jog/Shuttle (front keys no. 11).
Brightness, contrast and color can individually be set for each video channel. Select the
camera menu (2nd icon) and enter the option “Video adjust“. Define the values by using
either the mouse, the arrow keys located around the ENTER key or the Jog/Shuttle. After
adjusting the values, exit the menu by either pressing the MENU key 3 times or
mouseclick on the cross in the menu bar (top right corner).
4. Recording
From the menu on the left, choose the search method:
- Time search
Enter time and date of the requested recording position and click PLAY.
Upon successful search, the monitor automatically switches to playback mode and
playback starts at the requested position.
- Event search
Select time and date as well as the relevant camera(s). In the “Event“ row, select
the requested event type (alarm, motion, video loss and text) and confirm
your selection by clicking SEARCH. After the search, a list of available events is
displayed. Select the relevant event from the list and click PLAY.
The monitor automatically switches to playback mode and playback starts at the
selected position.
- Smart search
Select time and date as well as the relevant camera(s). Click “Grid Setting“ key to
edit motion grid setup. Confirm your selection by clicking SEARCH. After the search,
a list of available motion is displayed. Select the relevent motions from the list and
click PLAY. The monitor automatically switches to playback mode and playback starts
- Snapshot search
Select among thumbnail images extracted from the recorded video at a user defined
interval, at a specific date and time, in response to various types of events. Confirm
your selection by clicking SEARCH. After the search, all the snapshots will be
displayed. The result gives user an efficient review of significant activities.
7. Archiving video data
Recording starts directly after the recorder has booted; there is no separate LED or
display.
5. Playback
Start the playback at the latest HDD playback position by pressing the PLAY key (Quick
Play function deactivated!).
Fast forward / reverse:
Use the „Fast Forward“ key to play video images forward / reverse with up to 32x speed
(1x,2x,4x,8x,16x,32x and >>> “minute steps“)
Pause:
Actuate ◄/ II or ►/ II to freeze the current playback position.
6. Playback search
Press the SEARCH key to enter the playback search menu.
To archive to USB, insert a USB stick into the USB socket at the front. To archive to
CD/DVD, insert the CD/DVD into the DVD+RW burner at the front . Press the COPY key
in live mode to display the context menu.
Enter start and end time of the video export as well as the camera number and press
COPY to start the video data export.
If requested, the player software can also be exported to the USB stick or CD/DVD by
activating the checkbox “Player“.
Exit the menu by either pressing the MENU key several times or mouseclick on the cross
in the menu bar (top right corner).
8. Everfocus Central Management Software
ENDEAVOR DVR is supported by Everfocus Central Management Software. Please visit
Everfocus website at: http://www.everfocus.com to download the software.
Loading...