EDN800
Installation Guide
Copyright © EverFocus Electronics Corp,
Release: Jan. 2009
This installation guide provides instructions for installing the EDN800 IP Camera. For
all other aspects of using this product, please refer to EDN800 User’s Manual, which
is available on the CD included in this package.
EDN800
Installation steps
1. Confirm that all of the accessories have been supplied with the network camera
from the list below.
2. Confirm that your PC answers to the minimum computer requirements listed
below.
3. Mount the camera to ceiling or wall. Please see “1. Installation” on page 4.
4. Connect the cables. Please see “2. Connecting the Cables” on page 7.
5. Network Connection. 3 typical types of network connection. Please see “3.
Network Connection” on page 8.
6. Set an IP address. Please see “4. Assign IP address” on page 10.
Package Contents
- Network camera (x1)
- Accessory packet (x1)
- Power adaptor (x1)
- Printed Installation Guide (x1)
- Software APs including user’s manual CD (x1)
Minimum Computer Requirements
-CPU: PC Pentium IV (2.0 GHz or higher) / AMD Athlon (or higher)
-VGA card: 32 MB min. 16.7 million colours, with DirectX9.0c support
-Memory: 512 MB RAM min., 1 GB HD space or above
Additional HD space depends on required local storage of video files,
100 Mbps network card
-Screen Resolution: 1024 x 768 pixels or higher, 32-bit pixel color resolution
-Operating system: Windows XP, service pack 3 or higher
-Software: DirectX9,0c, Internet Explorer 6.0 or higher
Note: Please connect to Microsoft’s Web Site for downloading.
For example: (This web site may change without notices.)
http://www.microsoft.com/downloads
2
EDN800
1. Installation
1. Take off camera's cover first. Use the hexagon wrench provided to separate the
cover from camera body by unscrewing the 2 screws.
2. Fix 3 screws of the bracket firmly to wall or ceiling. Adjust the camera to best
angle for viewing.
Ceiling mount
4
Wall mount
EDN800
3. Adjust the camera to any angle that you wish. Pan and tilt to aim the camera at what
you need to watch until the best angle of image is obtained.
Tilt
5
Pan