EverFocus ECOR264x1 series Quick Reference Manual

ECOR264x1 series Quick Reference Guide

Operating elements

Ecor264x1_qr_guide_en_rev1_01

Description of on-screen configuration menu (control bar)

1

2

3

4

5

6

7

8

910

1234567

891011

12

Description of the on-screen main menu (control bar)

Nr. Menu Manual

1) Express Chapter 4.2

2) Camera Setting Chapter 4.3

3) Record & Play Setting Chapter 4.4

4) Alarm & Event Setting Chapter 4.5

5) Schedule Setting Chapter 4.6

6) Network Setting Chapter 4.7

7) Disk Setting Chapter 4.8

8) Display Setting Chapter 4.9

9) System Setting Chapter 4.10

10) Information Setting Chapter 4.11

Nr. Menu Manual

1) Playback Chapter 3.5

2) PTZ Chapter 3.6

3) Layout Chapter 3.7

4) Channel switching Chapter 3.8

5) Display Chapter 3.9

6) Sequence Chapter 3.10

7) Monitor Chapter 3.11

8) Zoom Chapter 3.12

9) Search Chapter 3.13

10) Copy Chapter 3.14

11) DVR configuration Chapter 4

12) Logout Chapter 3.15

1

2

3

9

4

65

78

10 15

11

16

17

18

19

20
21
22

23

12

13

14

1) IR Receiver: Receiver for IR remote control.

2) USB 2.0 (front): For connecting USB-Flash-Drive to copy/archive video or for firmware upgrades.

3) DVD+RW: DVD+RW burner (D models only).

4) Channel keys

1~16 (1~9, 1~4): Press channel key (CH1~CH16) / (CH1~CH9) / (CH1~CH4) to display that channel

in full screen view.

5) ◄I /◄◄: Fast reverse playback or step reverse playback depending on playback mode.

6) I I / ◄: Reverse playback or pause.

7) ■ Stop playback.

8) ►/ I I: Forward playback or pause.

9) ►►/I►: Fast forward playback or step forward playback depending on playback mode.

10) View: Press this key to switch between 4x, PiP (Picture in Picture),full screen, 9x, 10x, 13x and 16x.
Note: PIP display is not available in playback mode.

11) SEQ: Press this key to enter the auto sequential switching mode. The sequence dwell time

can be set in “Display Setting” tab of the menu. For further details on SEQ, please
refer to “Chapter 4.9 -Display Setting”.

12) Display: Press this key to switch display of channels and status bar.

13) Monitor:

Press key shortly: Switch between main monitor and call monitor.
Hold key (>1 second): Switch main monitor display between VGA and BNC output.

The deactivated video output will show a message:
" The monitor is currently unavailable. Please hold "Monitor" key to switch."

14) Zoom: In full screen mode, 2x electronic zoom. Zoom screen can be moved through arrow keys.
Enter key changes the direction. Pressing the zoom key again switches the electronic zoom off.

15) SEARCH: Press this key to enter the Search Menu. For further details on the search function,

please refer to “Chapter 3.13 - Search ”.

16) Menu/ESC: Press this key to enter/exit MAIN SETUP MENU.

17) Copy: Press this key to enter Copy Menu(video data export). For further details on the copy

function, please refer to “Chapter 3.14 -Copy”.

18) ENTER / arrow keys: Instead of or in combination with a mouse, use these keys to change the menu settings.

19) Power LED: LED ON indicates Power on.

20) HDD LED: LED ON indicates HDD active.

21) Alarm LED: LED ON indicates Alarmactive.

22) Network LED: LED ON indicates Network active.

23) Record LED: LED ON indicated Record active.

1. MONITOR DISPLAY OPTIONS

Press the VIEW key (front key no. 10) to toggle the available multiscreen modes on the selected
monitor.

Full screen:
Press one of the channel keys 1 ~ 16 /1~9 / 1~4 (front keys no. 4).

Sequence (automatic switching, available in live mode only)

Press the SEQ key (front key no. 11) to start / stop the automatic switching mode.

Switch beween MAIN and CALL monitor operation

Press the MONITOR key (front key no. 13) to switch operation between main monitor and call monitor.
Note: Holding MONITOR key (>1 second) will switch main monitor display between VGA and

BNC output. The deactivated video output will show a message:
" The monitor is currently unavailable. Please hold "Monitor" key to switch."

2. MENU START

Press the MENU/ESC key (front key no. 16) to access the main menu bar. Control the menu either
through mouse or through ARROW keys (front keys no. 18).

3. BRIGHTNESS – CONTRAST – COLOUR

Brightness, contrast and colour can individually be set for each video channel. Select the camera menu
(2nd icon) and enter the option „Video adjust“. Define the values by using the mouse. After adjusting
the values, exit the menu by either pressing the MENU/ESCkey 3 times or by mouseclick on the cross
in the menu bar (top right corner).

4. RECORDING

Use the RECORD key for manual recording start / standby (event recording). The RECORD LED (23)
is illuminated if the DVR is either recording or in standby mode.

5. PLAYBACK

Start the playback at the latest HDD playback position by pressing the PLAY key (Quick Play function
deactivated!).

Fast forward / reverse:

Use the

◄I /◄◄/ ►►/I► keys to play video images forward / reverse with up to 32x speed

(1x,2x,4x,8x,16x,32x )

Pause:

Press the

►/ I I key to freeze the current playback position. Use the ◄I /◄◄/ ►►/I► keys to step

one image forward / backward.

6. PLAYBACK SEARCH

Press the SEARCH key to enter the playback search menu.

From the menu on the left, select the search method:

- TIME / DATE SEARCH

Enter time and date of the requested recording position and click PLAYBACK. Upon successful
search, the monitor automatically switches to playback mode and playback starts at the requested
position.

- EVENT SEARCH
Select time and date as well as the relevant camera(s). In the „Event“ row, select the requested
event type (alarm, motion, video loss and others) and confirm your selection by clicking SEARCH.
After the search, a list of available events is displayed. Highlight the relevant period and click
PLAY.
The monitor automatically switches to playback mode and playback starts at the selected position.
If you‘d like to export this period, just click COPYinstead of PLAY.

- MOTION SEARCH (SMART SEARCH)
Select time and date as well as the relevant camera(s). If applicable, define a motion zone by
clicking GRID SETTING. Confirm your selection by clicking SEARCH. After the search, a list of
available motion events is displayed. Select the relevant event from the list and click PLAY.
The monitor automatically switches to playback mode and playback starts at the selected position.
If you‘d like to export this event, just click COPY instead of PLAY.

- SNAPSHOT

Select time and date as well as search direction, time interval and the relevant camera. Confirm
your selection by clicking SEARCH.
The monitor automatically switches to display mode and displays the snapshots of the selected
camera. Click right on a snapshot to play it back. Additionally, the following options are available:

Back Scroll backward through the defined time intervals
Play Playback of the selected snapshot
Exit Return to the snapshot search menu
Forward Scroll forward through the defined time intervals

7. COPY / ARCHIVING VIDEO DATA

Insert a USB stick into the USB socket at the front.
Press the COPY key in live mode to display the copy menu.
Enter start and end time of the video export and highlight the requested cameras.
Select the target medium USB / or CD/DVD (for DVR models with DVD drive).
Press the COPY key to start the video data export.
If requested, the player software can also be exported to the USB stick by activating the checkbox
„PLAYER“.
Exit the menu by either pressing the MENUkey several times or by mouseclick on the cross in the
menu bar (top right corner).

ECOR264x1 series Quick Reference GuideOperation