EverFocus ECOR264-16X1, ECOR264-4X1, ECOR264-9X1 User Manual

User Manual

ECC

E

ECC

E

ECC

E

O

R226644--44

O

R

O

R226644--99

O

R

O

R226644--1166

O

R

X11

X

X11

X

X11

X

DVV

D

DVV

D

DVV

D

R

R

R

R

R

R

EVERFOCUS ELECTRO N I C S CORPORA T I O N

ECOR264-4X1 DVR

ECOR264-9X1 DVR

ECOR264-16X1 DVR

Instruction Manual

 2010 EverFocus Electronics Corp

www.everfocus.com

All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or by

any means without written permission of the Everfocus Electronics Corporation.

Release Date: Apr. 2010

QuickTime is a registered trademark of the Apple Computer, Inc.

Windows is a registered trademark of the Microsoft Corporation.

Linksys is a registered trademark of the Linksys Corporation.

D-Link is a registered trademark of the D-Link Corporation.

DynDNS is a registered trademark of the DynDNS.org Corporation.

Other product and company names mentioned herein may be the trademarks of their respective owners.

Safety Precautions

 Refer all work related to the installation of this product to qualified service personnel or system

installers.

 Do not block the ventilation openings or slots on the cover.
 Do not drop metallic parts through slots. This could permanently damage the appliance. Turn the

power off immediately and contact qualified service personnel for service.

 Do not attempt to disassemble the appliance. To prevent electric shock, do not remove screws or

covers. There are no user-serviceable parts inside. Contact qualified service personnel for
maintenance. Handle the appliance with care. Do not strike or shake, as this may damage the
appliance.

 Do not expose the appliance to water or moisture, nor try to operate it in wet areas. Do take immediate

action if the appliance becomes wet. Turn the power off and refer servicing to qualified service
personnel. Moisture may damage the appliance and also may cause electric shock.

 Do not use strong or abrasive detergents when cleaning the appliance body. Use a dry cloth to clean

the appliance when it is dirty. When the dirt is hard to remove, use a mild detergent and wipe gently.

 Do not overload outlets and extension cords as this may result in a risk of fire or electric shock.
 Do not operate the appliance beyond its specified temperature, humidity or power source ratings. Do

not use the appliance in an extreme environment where high temperature or high humidity exists. Use
the DVR at indoor type temperatures within 0°C~40°C (32°F~104°F) and at relative humidity between
20%~80%. The input power source for this device is 12VDC though a power supply which operates
from100~240VAC.

 Read Instructions

All the safety and operating instructions should be read before the unit is operated.

 Retain Instructions

The safety and operating instructions should be retained for future reference.

 Heed Warnings

All warnings on the unit and in the operating instructions should be adhered to.

 Follow Instructions

All operating and use instructions should be followed.

 Cleaning

ii

ii

iiii

ATTENTION!

This is a class A product which may cau

se radio interference in a domestic environment; in

this case, the user may be urged to take adequate measures.

Unplug the unit from the outlet before cleaning. Do not use liquid cleaners, abrasive or aerosol
cleaners. Use a damp cloth for cleaning

 Attachments

Do not use attachments not recommended by the product manufacturer as they may cause hazards.

 Water and Moisture

Do not use this unit near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub,
in a wet basement, near a swimming pool, in an unprotected outdoor installation, or any area which is
classified as a wet location.

 Servicing

Do not attempt to service this unit by yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

 Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items
placed upon or against them, playing particular attention to cords and plugs, convenience receptacles,
and the point where they exit from the appliance.

 Object and Liquid Entry

Never push objects of any kind into this unit through openings as they may touch dangerous voltage
points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the
unit.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures :

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the users’ authority to operate this equipment.

iii

iii

iiiiii

The information in this manual was current upon publication. The manufacturer reserves the right to

revise and improve his products.

WEEE

This Product is RoHS compliant.

Therefore, all specifications are subject to change without prior notice. Manufacturer is not responsible for misprints or typographical
errors.
Please read this manual carefully before installing and using this unit. Be sure to keep it handy for later reference.

iv

iv

iviv

TABLE OF CONTENTS

1 PRODUCT OVERVIEW..................................................................................................... 1

1.1 FEATURES....................................................................................................................... 1

1.2 PACKAGE CONTENTS................................................................................................... 2

1.3 SPECIFICATIONS ........................................................................................................... 3

1.4 FRONT PANEL ................................................................................................................ 5

1.5 REAR PANEL................................................................................................................... 7

1.6 VIDEO INPUTS/OUTPUTS INSTALLATION............................................................... 9

1.7 AUDIO INSTALLATION ................................................................................................ 9

1.8 ALARM CONTACTS INSTALLATION......................................................................... 9

1.8.1 Alarm Input Contacts ..............................................................................................................................9

1.8.2 Alarm Output Relay...............................................................................................................................10

1.9 RS-485

1.9.1 General RS-485 bus installation ...........................................................................................................10

1.9.2 RS-485 socket pin assignment...............................................................................................................12

1.9.3 EKB-500 connection with network patch cable.....................................................................................12

1.9.4 EKB-500 connection to several DVRs...................................................................................................12

1.9.5 Speed Dome Installation .......................................................................................................................12

1.10 USB-M

1.11 NETWORK CONNECTION........................................................................................ 13

1.11.1 Direct PC Connection through Crossover Network Cable ...................................................................13

1.11.2 Network Connection through Patch Cable............................................................................................14

1.12 FINAL INSTALL PROCESS....................................................................................... 14

KEYBOARD /

OUSE INSTALLATION

PTZ I

NSTALLATION

......................................................................... 10

.......................................................................................... 13

2 MOUSE AND FRONT PANEL OPERATION ............................................................... 15

2.1 GENERAL USB MOUSE OPERATION....................................................................... 15

2.1.1 How to select a channel / Enable audio ................................................................................................15

2.1.2 OSD Root Menu ....................................................................................................................................15

2.1.3 Operation in the Configuration Menus .................................................................................................16

2.1.4 Field Input Options ...............................................................................................................................16

2.2 G

2.2.1 How to select a channel / Enable audio .......................................................................................................18

2.2.2 OSD Root Menu ...........................................................................................................................................18

2.2.3 Front Panel Key Review...............................................................................................................................18

2.2.4 Operation in Configuration Menu.........................................................................................................18

2.2.5 Field Input Options ...............................................................................................................................19

ENERAL FRONT PANEL OPERATION

............................................................................... 18

3. GENERAL DVR OPERATIONS...................................................................................... 21

3.1 RECORD......................................................................................................................... 21

3.2 LOGIN............................................................................................................................. 21

3.3 SELECT CAMERA OPERATION................................................................................. 22

3.5 PLAYBACK.................................................................................................................... 23

vvvv

3.6 PTZ.................................................................................................................................. 24

3.6.1 General PTZ control (if PTZ cameras are installed)..................................................................................24

3.6.2 Express Control of PTZ.........................................................................................................................25

3.7 LAYOUT......................................................................................................................... 27

3.7.1 Bring a camera to full screen mode ......................................................................................................27

3.8 CHANNEL SWITCHING............................................................................................... 27

3.9 DISPLAY ........................................................................................................................ 28

3.10 SEQUENCE.................................................................................................................. 28

3.11 ZOOM........................................................................................................................... 28

3.12 SEARCH....................................................................................................................... 30

3.12.1 Time Search...........................................................................................................................................30

3.12.2 Event Search..........................................................................................................................................31

3.12.3 Smart Search .........................................................................................................................................32

3.12.4 Snapshot Search ....................................................................................................................................35

3.13 COPY............................................................................................................................ 37

3.14 LOGOUT...................................................................................................................... 38

4 DVR CONFIGURATION.................................................................................................. 39

4.1 CONFIGURATION MENU............................................................................................ 39

4.2 EXPRESS........................................................................................................................ 39

4.3 CAMERA SETTING ...................................................................................................... 42

4.3.1 Basic Setting..........................................................................................................................................42

4.3.2 Video Adjust ..........................................................................................................................................45

4.3.3 Motion ...................................................................................................................................................46

4.3.4 Video Loss .............................................................................................................................................49

4.4 RECORD & PLAY SETTING........................................................................................ 50

4.4.1 Record ...................................................................................................................................................51

4.4.2 Built-in Calculator ................................................................................................................................51

4.4.3 Play .......................................................................................................................................................53

4.5 ALARM & EVENT SETTING....................................................................................... 54

4.5.1 Alarm.....................................................................................................................................................54

4.5.2 Event......................................................................................................................................................57

4.6 SCHEDULE SETTING................................................................................................... 66

4.6.1 Express Setup .......................................................................................................................................66

4.6.2 Holidays ................................................................................................................................................67

4.6.3 Schedule ................................................................................................................................................68

4.6.4 Alarm Action .........................................................................................................................................74

4.7 NETWORK SETTING.................................................................................................... 78

4.7.1 LAN .......................................................................................................................................................78

4.7.2 EMAIL...................................................................................................................................................80

4.7.3 DDNS ....................................................................................................................................................81

4.7.4 Alarm Server .........................................................................................................................................83

4.8 DISK INFORMATION................................................................................................... 84

4.8.1 Disk .......................................................................................................................................................84

4.8.2 Lock.......................................................................................................................................................85

4.9 DISPLAY SETTING....................................................................................................... 86

4.9.1 Monitor OSD.........................................................................................................................................86

4.9.2 Main M/T SEQ ......................................................................................................................................88

4.9.3 Call M/T SEQ........................................................................................................................................89

vi

vi

vivi

4.10 SYSTEM SETTING..................................................................................................... 90

4.10.1 Date/Time..............................................................................................................................................90

4.10.2 Daylight Saving.....................................................................................................................................91

4.10.3 User.......................................................................................................................................................92

4.10.4 I/O Control............................................................................................................................................95

4.10.5 Misc.......................................................................................................................................................96

4.11 INFORMATION........................................................................................................... 98

4.11.1 System....................................................................................................................................................98

4.11.2 Log.........................................................................................................................................................99

5 NETWORKING OVERVIEW........................................................................................ 101

5.1 I

5.2 S

5.3 G

5.4 V

5.5 PRE-I

5.6 W

5.7 S

5.8 D

5.9 R

NTRODUCTION TO

UBNET MASKS

ATEWAY ADDRESS
IRTUAL PORTS

NSTALLATION

HAT IS YOUR NETWORK SETUP

IMPLE ONE TO ONE CONNECTION

IRECT HIGH SPEED MODEM CONNECTION
OUTER OR

LAN C

TCP/IP ............................................................................................. 101

.............................................................................................................. 101

....................................................................................................... 101

.............................................................................................................. 102

........................................................................................................ 102

?.................................................................................. 103

................................................................................. 104

ONNECTION

...................................................................................... 111

................................................................... 109

6 REMOTE OPERATION FROM BROWSER.................................................................... 114

6.1 CONNECTING TO ECOR264.......................................................................................... 114

6.2 BROWSER SECURITY SETTING .................................................................................. 115

6.2.1 Installing ActiveX controls..................................................................................................................115

6.2.2 Enabling ActiveX Controls..................................................................................................................118

6.3 REMOTE LIVE VIEW ................................................................................................. 121

6.4 REMOTE PLAYBACK ................................................................................................ 123

7 EVERFOCUS DDNS SETUP.......................................................................................... 124

8 LINKSYS & D-LINK PORT FORWARDING ............................................................. 126

8.2 TYPICAL LINKSYS PORT FORWARDING............................................................. 126

8.3 TYPICAL D-LINK PORT FORWARDING ................................................................ 128

9 TROUBLESHOOTING................................................................................................... 131

APPENDIX A: TIMING OF ALARM MODES.................................................................... 133

APPENDIX B: EXPRESS SETUP RECORDING VALUE SELECTION RULES .......... 136

APPENDIX C: REMOTE CONTROL................................................................................... 138

vii

vii

viivii

Chapter

1

1 PRODUCT OVERVIEW

This new EverFocus digital video recorder is based on H.264 compression technology, resulting in
increased recording capacity and improved network image transmission speed while retaining high image
quality. Comprehensive features and extended event recording settings enable the almost universal
application of this DVR. The ECOR264-4/ECOR264-9/ECOR264-16 DVRs permits multiple control inputs.
These inputs include mouse control, front panel control, IR remote control and EverFocus keyboard
(EKB500) control. Mouse control employs a simple Graphical User Interface (GUI), offering experienced
PC users the similarity of interactive command of a computer-controlled device. With the GUI, users can
command specific actions on the ECOR264-4/ECOR264-9/ECOR264-16 DVR through graphical icons and
visual indicators. Simply point, click and drag the playback bar on the screen to playback your recordings in
any time slot. All GUI functions can be operated via the front panel buttons or mouse. Hop on the Express
Lane! The E ECOR264-4/ECOR264-9/ECOR264-16 DVR is engineered for express operations. Setup,
copy, search and playback recordings in seconds with a simple “point and click” on the command icons.

1.1 FEATURES

- H.264 Compression format for efficient disk utilization and network bandwidth conservation

- Real time recording rate and playback rate for all cameras

- Normal and event recording frame rate can be set independently for each camera

- Multiple Main Monitors: VGA (800x600, 1280X1024*)/BNC Main monitor outputs

- Call monitor: additional composite BNC output with multiplex and/or sequenced views

- Simultaneous recording at D1 or 2CIF with real time streaming at CIF for remote web viewing to conserve
bandwidth

- Pentaplex Operation (Simultaneous live, recording, playback, archiving and remote viewing)

- Free EverFocus DDNS Service - static IP address is not required for reliable remote access

- User friendly GUI with graphical icons and visual indicators

- Supports eSATA (Future use, hot-swappable model does not support eSATA)*

- Supports 3GPP for mobile monitoring

- Multiple Control Inputs: mouse/front panel/remote controller/EKB500 keyboard

- Built-in record time calculator for fast recording estimation

- Express Setup: A unique menu option for quick & easy installation

- Express Archive: Archive video instantly (to USB) while playing back

- Express Playback: Simply point, click and drag the playback bar to view desired recordings

- Express Search: Use the intuitive playback bar with simple drag & drop operations

- Smart Search: Directly catch the movement in the specified area

- Snapshot search: Show snapshots of the specified interval, help quickly find the interested scene

1

- Remote configuration support from the built-in web interface

- 10/100M Ethernet interface for remote network viewing and control

- On-screen PTZ control via mouse or front panel

- Support for up to 1 Hot Swappable HDD or 2 fixed internal HDD*

- Built-in DVD burner*

- 2 USB 2.0 ports (1 located on front panel, 1 located on back panel) for video archive and mouse usage

- Multi-language support

- Watermark capabilities to identify intentional modifications to exported data

- 19” Rack mountable

- USB Mouse and IR remote control included

*Feature may not be available on all models

1.2 PACKAGE CONTENTS

Standard Package

R Series (Hot-swappable model)

-HDD Tray x 1

-Hot-swappable HDD key x 2

-Screws for HDD x 4

-Digital Video Recorder x1

-User Manual x 1

-AC Adapter and Power Cord x1

-Mouse x 1

-19” Rack mounting adapters (pair) x 1

-CD with CMS Software and PDF of DVR and CMS User Guides

-Terminal Block x 6

-IR Remote Control x 1

-Battery x 2

D Series (DVD model)

-HDD Fixing Bracket x 1 set

-Power Cord x 1 (2 connectors)

-SATA cable x 2

-Screws x 8 for HDD

-Screws x 4 for HDD fixing
bracket

- Shockproof rubber x 4

F Series (No Hot-Swappable, No

DVD model)

-HDD Fixing Bracket x 1 set

-Power Cord x 1 (2 connectors)

-SATA cable x 2

-Screws x 8 for HDD

-Screws x 4 for HDD fixing
bracket

- Shockproof rubber x 4

2

1.3 SPECIFICATIONS

ECOR264X1

Channels 16 9 4

Compression Format H.264

480 NTSC /400 PAL (CIF) 270 NTSC /225 PAL (CIF) 120 NTSC /100 PAL (CIF)

Recording Rate/Resolution
(Max. total)(FPS rates per camera
can be set independently up to the
max total rate)

Playback Rate/Resolution

Dual Streaming Smart remote viewing at CIF or D1 stream

3GPP Yes (RTSP stream)

Pentaplex Operation Simultaneous Live, Recording, Playback, Archive and Remote Viewing

Camera Inputs 16 BNC 9 BNC 4 BNC

Looping Camera Outputs

Video Outputs

Audio Input/Output (RCA)

Recording Mode

Playback Search

Alarm In

Alarm Out

Video Pause

Video Loss Detection

Motion Detection

Event Log

Watch Dog Timer

Internal HDD

External HDD

Built-in DVD Burner

User Interface

OS

Network/Protocol

Control PTZ via OSD

USB

Schedule Setting

User Access

240 NTSC /200 PAL

(2CIF)

480 NTSC /400 PAL (CIF) 270 NTSC /225 PAL (CIF) 120 NTSC /100 PAL (CIF)

240 NTSC /200 PAL

(2CIF)

Time search, Event search, Smart search, Snapshot search

1 eSATA (reserved for future use, hot-swappable model does not support eSATA)

Mouse/Front Panel Operated GUI(Graphical User Interface)

IP/DHCP/PPPoE/DDNS/SMTP/POP3/HTTP/SSL/RTSP/RTP/NTP

2 USB 2.0 port (1 on Front Panel, 1 on Back Panel)

Supports Express and Advanced Schedule Settings

240 NTSC /200 PAL

(2CIF)

120 NTSC /100 PAL (D1)

240 NTSC /200 PAL

(2CIF)

120 NTSC /100 PAL (D1)

One per camera input (BNC)

Main VGA/BNC; Multiplex Call BNC

4 Inputs / 1 Output

Continuous, Event and Schedule

One per Video Input

4 Alarm Outputs

Yes

Yes

Yes

Yes

Yes

1 Hot swappable / 2 Internal HDD

Slim Type DVD Burner (Optional)

Embedded Linux

10/100M Ethernet; TCP-

Yes (via mouse or front panel)

3 Levels of User Access Supported

120 NTSC /100 PAL (2CIF)

120 NTSC /100 PAL (2CIF)

3

RS-232

RS-485

Power Source

Dimensions (L x W x H)

Temperature

Certifications

Supported PTZ Protocols

YES

Terminal connector

12VDC – Power Supply Included

353.0 x 354.8 x 70.60 mm / 13.89" x 13.96" x 3.055"

0°C~40°C / 32°F~104°F (20~80% humidity)

CE, FCC, UL

EverFocus, Pelco D, Pelco P, Samsung, Transparent

4

1.4 FRONT PANEL

Your primary interaction with your new DVR will be through the Front Panel buttons and their

corresponding buttons on the included IR Remote Control. Take a moment to learn where the keys are as

the remainder of the manual will refer to them often.

6

○1

○2

○3

○4

Figure 1-1 Front Panel

○5 ○7 ○8 ○16 ○18

○10

○11

○12

○13

○9 ○

○14

○15

○17

○19

○23

1) Remote Control Receiver: Receiver for IR remote control.

2) USB 2.0 (front):::: For connecting USB-Flash-Drive to copy/archive video or for firmware upgrades.

3) DVD+RW: DVD+RW burner for DVD model. (D models only) (Replaced by hot swap drive on

“R” models).

4) Channel keys 1~16 (1~9, 1~4): Press channel key (CH1~CH16) / (CH1~CH9) / (CH1~CH4) to display

that channel in full screen view.

5) ◄I /◄◄: Fast reverse playback or step reverse playback depending on playback mode.

6) I I / ◄: Reverse playback or pause

○20

○21
○22

7)

■

Stop playback

8) ►/ I I: Forward playback or pause

9) ►►/I►: Fast Forward playback or step forward playback depending on playback mode.

5

10) View: Press this key to switch between 4x, PiP (Picture In Picture),full screen, 9x, 10x,

13x and 16x.

Note: PIP display is not available in playback mode.

11) SEQ: Press this key to enter the auto sequential switching mode. The sequence dwell

time can be set in “Display Setting” tab of the Menu. For more detail about SEQ,
please see “Section 4.9.2 Display Setting-Main M/T SEQ”.

12) Display: Press this key to switch display of channels and status bar.

13) Monitor: Switch between Main monitor and Call monitor.

14) Zoom: In full screen mode, 2x electronic zoom. Zoom screen can be moved through

arrow keys. Pressing the zoom key again switches the electronic zoom off.

15) Search: Press this key to enter Search Menu. For more detail about the Search function,

please see “Section 3.12 Search”.

16) Menu/ESC: Press this key to enter/exit MAIN SETUP MENU.

17) Copy: Press this key to enter Copy Menu. For more detail about Copy function, please

see “Section 3.13 Copy”.

18) Enter/ Arrow keys: Instead of or in combination with a mouse, you can use these keys to change

the Menu settings.

19) Power LED: This LED ON indicates Power on.

20) HDD LED: This LED ON indicates HDD active.

21) Alarm LED: This LED ON indicates Alarm active.

22) Network LED: This LED ON indicates Network active.

23) Record LED: This LED ON indicates Record active.

6

1.5 REAR PANEL

During initial setup you will be connecting your DVR to multiple input and output devices. This is done

through the rear panel.

○4

○

○1

○13

○

6

○7 ○8 ○10 ○11

○9

Figure 1-2 Rear Panel

5

○12

○2 ○3

○14

○○○○1 Video In: Connect camera’s video output or other composite video source to the video input

connection.

○○○○2 eSATA: Used for external SATA HDD bay. Note: Hot-swappable model does not support eSATA.

○○○○3 Audio In: Connect line level output of an audio preamplifier to the audio input connection

corresponding to the appropriate camera.

○○○○4 POWER: Plug the DC 12V power source provided into the power socket.

5555

○○○○

ETHERNET: RJ-45 network connection 10/100/1000Mbps Ethernet. There are two LEDs on the LAN

jack; Green LED means network is connected, amber LED flickers when data is being
exchanged.

○○○○6 USB 2.0: USB port recommended for connecting the USB mouse.

○○○○7 RS232 socket: 9-pin D-Sub control input for RS-232.

○15

7

○○○○8 RS485 socket: For remote control via RS-485 keyboards and telemetry control for attached PTZ

devices

○○○○9 Main: Main monitor for live and playback display and on-screen display.

○○○○10 Call: Call monitor output. Spot monitor for full screen live display, sequence mode and alarm

camera switching.

○○○○11 Main VGA: Main monitor - connect a VGA monitor to the VGA output connection. VGA resolution is

800x600.

○○○○12 Alarm In: Connect up to 4 alarm inputs, selectable between N.O./N.C. contacts.

○○○○13 Video Out: Looping Outputs - connect the camera video signals to other equipment as required.

○○○○14 Alarm Out: N.C or N.O type alarm out (form “C”).

○○○○15 Audio Out: Connect to the line level input of an audio amplifier

.

8

1.6 VIDEO INPUTS/OUTPUTS INSTALLATION

Cameras and CCTV monitors must use copper center conductor/copper braid 75 Ohm video cable (e.g.
RG-59, RG-6, RG-11) with BNC connectors.

To avoid impedance mismatch and undesired loss/reflections, 50 Ohm coax cable (e.g. RG-58), or 75 ohm
foil shield antenna cable and other types of coaxial cable are not compatible.

All connected video sources must provide a 1 Vpp NTSC or PAL standard video signal.

When converting other transmission types (twisted pair, fiber optics, radio) for the video inputs, be sure to
verify accurate receiver calibration and signal levels.

ATTENTION: In order for the system to auto-detect the appropriate video format (NTSC or PAL), make
sure that there is a video signal on video input 1 upon power-up.

1.7 AUDIO INSTALLATION

This DVR provides 4 line level audio inputs and 1 line level audio output.

ATTENTION: The direct connection of a non-amplified microphone is not supported (a microphone
amplifier is required). The audio output requires an amplifier to drive a speaker or headphones.

The installation must be connected with audio coax cable and RCA plugs.

AUDIO RECORDING FUNCTIONALITY:

Audio recording is activated / deactivated in the Camera Menu for Camera #1~4 respectively. Please check
and always comply with local laws and regulations when using audio recording.

The audio channel is always recorded together with video and is independent of the image recording rate.
Though the audio record control is done in the Camera #1~4 screen, there is no specific camera allocation.

1.8 ALARM CONTACTS INSTALLATION

The alarm inputs can be used to start recording or for recording rate adjustment. In addition, alarm
reactions such as camera display on the monitor, buzzer, e-mail and network alarm are available. The
alarm output relay can be switched if required. Alarm input response actions can be controlled according to
a flexible schedule.

1.8.1 Alarm Input Contacts

This DVR provides one alarm input per camera. All inputs are programmable N.O. (Normal Open) or N.C.
(Normal Closed) Inputs have to be switched by dry contacts.

9

Alarm input with N.O. (Normal Open) contact Alarm input with N.C. (Normal Closed) contact
in idle state in idle state

All settings are programmed in the ALARM menu (Section 0).

1.8.2 Alarm Output Relay

The relay output provides either Normally Open or Normally Closed dry contacts.

Output relay in idle state

1.9 RS-485 keyboard / PTZ Installation

All functions can be remote-controlled by the EKB-500 universal keyboard. Using the EEPbus protocol,
digital video recorders, keyboards and speed domes can be installed on one single RS-485 bus. One
system can comprise up to 8 keyboards.

1.9.1 General RS-485 bus installation

The EKB-500 keyboard uses a RS-485 simplex wiring; the signal is transferred via a single twisted pair line.
CAT5 network cable is recommended, UTP version (unshielded) is sufficient for normal applications. A
shielded cable should be used if the installed cables are expected to be highly susceptible to interference.
The number of devices installed in one bus is limited to 32, and the maximum cable length is 3,900 feet.
Both of these can be expanded using a signal distributor EverFocus Model EDA997A (see below).

Both the first and the last device in series should be terminated with 120 Ohm resistance in order to
minimize line reflections.

RS-485 bus serial wiring

Cable length from box to device („Stubs“) has to be limited to 2m using connector boxes.

10

RS-485 bus serial wiring with connector boxes and connection cable

Direct RS-485 bus star wiring is not supported unless using an EverFocus Model EDA997A (see below).

Improper RS-485 bus star wiring

An EDA997A RS-485 signal distributor may be used to use a star wiring configuration.

Star wiring with RS-485 signal distributor

A RS-485 distributor can also be used to increase the maximum number of devices on the bus as well as
the total range. Each distributor output provides another RS-485 bus. This allows each output to extend an
additional 1200m, and it also enables the additional connection of 31 further devices to each output (the
output itself represents one device).
The maximum system expandability depends on the RS-485 address range of the installed devices.

System expansion with RS-485 signal distributor

11

I +

ATTENTION: EDA997A signal distributors are unidirectional! This means that the signal only flows from
the input towards the outputs. Therefore, e.g. the interconnection of several keyboards is not possible with
these types of signal distributor!

1.9.2 RS-485 socket pin assignment

The RS485 pin assignment is as follows:

1.9.3 EKB-500 connection with network patch cable

For a simple, short distance installation, recorder and keyboard can be connected directly using a standard
CAT5 network cable with an 8-pin connector at only one end, and at the other end the Pin 3 wire connected
to RS485 “+” (plus) and the pin 6 wire connected to RS-485 “-“ (minus).

1.9.4 EKB-500 connection to several DVRs

For long distance installations connecting several DVRs, please use an EDA997A signal distributor to
connect. For further details on keyboard connection, please refer to the EKB-500 manual.
RS-485 port communication settings are configured in the I/O CONTROL menu (Section 5.10.4 System
Setup: I/O - control).

1.9.5 Speed Dome Installation

Speed dome or telemetry receiver pan/tilt/zoom control is available through web browser or the optional
PowerCon software if the DVR is connected to a network. Local telemetry control is provided by USB ­mouse control or by the optional EKB-500 keyboard.

Supported protocols: EverFocus, Pelco-D, Pelco-P, Samsung, Transparent

Required DVR settings: RS-485 receiver address in CAMERA menu
(Section 4.3)
RS-485 parameters and protocol in the I/O CONTROL menu
(Section 5.10.4)

12

ATTENTION: Some Pelco-D / -P protocol domes and receivers require an address offset of -1, i.e. the
address assigned to the dome / receiver in the DVR camera menu must be 1 below the address set in the
dome / receiver itself!

1.10 USB-Mouse installation

Connect the USB mouse to one of the 2 USB ports. (This can be done while DVR is powered on) The rear
USB V1.0 port is recommended to reserve the higher speed front USB V2.0 port for video copy/export.

NOTE: Recommended mouse types are Logitech® and Microsoft® wired USB wheel-mouse. Wireless
USB mouse is not supported.

1.11 NETWORK CONNECTION

This section only describes physical connection to an Ethernet network. This step must be completed
before the DVR can connect to the network. There are two basic types of connection:

1.11.1 Direct PC Connection through Crossover Network Cable

The point-to-point connection of DVR and PC requires a crossover (crossed) network cable. This type of
connection is ONLY used for direct connection to a single PC. Make sure that the PC is equipped with a
10/100/1000 Mbps compatible network connection.

Figure 1-3 Direct PC Connection

Pinout of crossover-cable

13

1.11.2 Network Connection through Patch Cable

The connection to an existing network requires a normal patch cable (straight-through). The illustration
shows the connection to a network switch or router.

Figure 1-4 Network Connection through Patch Cable

Pinout of straight patch cable

1.12 FINAL INSTALL PROCESS

Once you have completed the basic wiring connections, you are ready to turn on the DVR. Simply plug in
the power source. The POWER LED will light up if power is normal. Once the system has finished loading,
you can begin to set up the menu options for the DVR.

14

Chapter

3

2 MOUSE AND FRONT PANEL OPERATION

ECOR264 DVRs support multiple sources to control the DVR. It can be controlled with a mouse, the front
panel, an EKB500, and the handheld IR remote control.

This chapter will cover the basic operation using the mouse and the front panel buttons.

2.1 GENERAL USB MOUSE OPERATION

2.1.1 How to select a channel / Enable audio

1. In a view consisting of more than one channel, users can select a channel by clicking once on the

desired channel screen. The selected screen will be highlighted by a white frame.

2. Double clicking on a channel screen will display full screen for this channel.

3. To enable audio out, click the audio icon (ex: ) at lower side of the screen. This system has only

one audio out. Click this button to enable or disable the audio-out mode.

2.1.2 OSD Root Menu

1. Right-click the mouse to obtain the DVR menu bar (see Figure 2-1 OSD Root Menu ). When you move

the mouse over each icon, its title will be displayed at the top of the control bar.

Figure 2-1 OSD Root Menu

2. Click on any icon to perform that action. These actions are covered in detail in Chapter 3.

3. Click the “X” in the top-right corner to close the DVR control bar.

15

2.1.3 Operation in the Configuration Menus

Click on the icon to access the Configuration Menu.

The Configuration menu screens (shown in Figure 2-2 OSD Menu) are divided into 3 main sections.

1

2

3

Figure 2-2 OSD Menu

1. In section 1, there are ten setup options available. Move the mouse over an icon and click to select it.

2. In section 2, the choices for the selected icon will be displayed. Click on a choice to select it.

3. In section 3, all the options for the selected choice will be available. Click on a field to make changes.

2.1.4 Field Input Options

The following are examples of different types of fields available in the Configuration menu.

Textbox: Click on the box and an on-screen keyboard will appear*. (see

note about the on-screen keyboard below)

Dropdown box: Click on the down arrow to see all selections, then

directly click on an option to select it.

Check box: Click on the box to enable it (checked) or disable it (unchecked).

16

Button: Click the button to execute the function.

Bar: Click and hold on the bar to adjust the set point Left or Right.

* Note about on-screen keyboard:

Click on a button to input that character.
The buttons on the right and bottom have the following functions:

Space Enter a space

Caps Switch to capital letters

Delete the letter

Confirm the selection

Move to right

Move to left

17

2.2 General Front Panel Operation

2.2.1 How to select a channel / Enable audio

1. In a view consisting of more than one channel, press the arrow keys (Up/Down/Right/Left) to scroll

through each channel that is displayed. The selected channel will be highlighted by white frame.
Pressing the “left” or “right” arrow when the last/first camera (1,4, 9 or 16) is highlighted will select all
cameras.

2. While channel #1 is selected, press the “Enter” button to turn Audio On/ Off.

2.2.2 OSD Root Menu

1. Press “Menu” key to display the DVR menu bar. Use the left/right arrows to scroll over each icon. The

title for each icon will be displayed on top of the menu bar.

2. Press “Enter” key on any icon to perform that action. These actions are covered in detail in Chapter 3

3. Press “Menu” to close the DVR menu bar.

2.2.3 Front Panel Key Review

The basic principle of front panel operation is to use arrow keys to navigate among the menu items. Use
the “Enter” key to confirm a selection or enter the next level menu. Press the “Menu” key to enter the Main
Menu or exit from the current level of the menu.

2.2.4 Operation in Configuration Menu

Press “Menu”, use the arrow keys to highlight the “Configuration” icon, and press “Enter” with
“Configuration” icon highlighted to bring up the Configuration menu.

NOTE: If the require password option is active, you will need to log in first. Refer to “Section 3.2 LOGIN” for
information on logging in. The menu (shown in

Figure 2-3 OSD Menu

) is divided into 3 main sections.

18

1

2

3

Figure 2-3 OSD Menu

1. In section 1, there are ten setup options available. Use arrow keys to highlight an icon and press “Enter”

to select it.

2. In section 2, the main choices for the selected icon will be displayed. Use Up/Down arrow keys to

highlight a choice and press “Enter” to select it.

3. In section 3, all the options for the selected choice will be available here. Use arrow keys to move

between items and press “Enter” to make changes to that item.

Note: press the “Menu” button to go back to the previous menu section/level.

2.2.5 Field Input Options

Textbox: Press Enter key and an on-screen keyboard will appear*. (see

note about on-screen keyboard below)

Dropdown box: Press “Enter” key to show the available options. Use

arrow keys to highlight the desired option and press “Enter” again to select it.

Check box: Press “Enter” key on a setting to enable it (checked) or disable it (unchecked).

Button: Press “Enter” key to execute the function.

19

Bar: Press “Enter” key to activate the slider, then use arrow keys to adjust the setting.

Press “Enter” again to finalize the changes.

* Note about on-screen keyboard:

Use the arrow buttons to highlight each character and press the “Enter” key on the front panel to input the
selected characters. When finished, highlight “Done” and press the “Enter” key on the front panel to
confirm. The buttons on the right and bottom have the following functions:

Space Enter a space

Caps Switch to capital letters

Delete the letter

Confirm the selection

Move to right

Move to left

20

Chapter

3

3. GENERAL DVR OPERATIONS

This chapter introduces the operations on major functions including playback, layout change, sequence,
triplex operations, copy, and search.

3.1 RECORD

By default, the DVR will always be in record mode. When the DVR is turned on, it will start to record. The
exceptions are:

1. DVR will not record any uninstalled cameras (Refer to Section 4.3.1 for more details)

2. If a schedule is active, the DVR will follow the record settings of the schedule.

3.2 LOGIN

In order to access ECOR264 options, users may be asked to log in for authority identification. To log in,
follow these steps.

1. Right click on the screen or press the Menu Key to display the Main Menu

2. Choose or click (or press “Enter” key) on the Configuration icon to bring up the following screen:

Figure 3-1 Login page

3. Select the user name from the drop-down list and input the password. The defaults are:

User name: admin (lower case)

Password: 11111111

21

+ To input password by mouse: click the password field to bring up the on-screen keyboard (see Figure 3-2
On-screen Keyboard). Click on each button to input the desired characters for the password. When finished,
click “Done” on the on-screen keyboard to confirm the password.

+ To input password using front panel: use the arrow keys to select the password field, then press the
“Enter” key to show the on-screen keyboard (see Figure 3-2 On-screen Keyboard). Use the arrow buttons
to highlight each character and press the “Enter” key on the front panel to input the selected characters.
When finished, highlight “Done” and press the “Enter” key on the front panel to confirm the password.

+ Click (or press “Enter” key when highlighted) on the “Login” button to log in to the system.

Figure 3-2 On-screen Keyboard

3.3 SELECT CAMERA OPERATION

ECOR264 is a pentaplex DVR; users can control each camera individually by selecting that camera. For
camera selection:

Mouse: Right-click the screen, the image will show a white frame on screen if the camera has been
selected. When in quad display mode, press the quad layout icon in layout menu to select all four cameras.

Front panel: Use the arrows to change the selection. Pressing the “right” or “left” arrow when the last/first
camera (1, 4, 9 or 16) is highlighted will select all cameras.

3.4 CHANGE AUDIO OUTPUT OPERATION

Use the arrow keys to select camera #1 and press “Enter” key to switch audio output on and off. An audio
icon will appear on the screen. Please make sure “Record Audio” option under Camera 1 Basic Settings
setup menu is ON if audio recording is required. Also, the audio source and/or audio output amplifier have
to be connected properly in order to utilize the audio functions. Note: Only Cam#1 controls audio, all others
do not control audio.

22