E-Line Series
ECMD200
Covert PIR Case Day/Night Camera with working PIR
Hide your surveillance camera in plain sight. The EverFocus ECMD200 covert PIR plus camera is based on a 1/3” Sony Super
HAD II Color CCD to produce high quality color images with a minimum of 600 horizontal TV lines of resolution. This camera
provides color images at all light levels, applies 2D digital noise reduction (DNR) to improve image quality and conserve DVR
HDD space in low light, and includes a separately powered functioning PIR motion detector with form-C alarm relay, tamper
switch, and controls for sensitivity, pulse count, alarm duration and walk test LED.
This camera plus PIR motion detector is equipped with an easy to use snap-on bracket that allows 3-axis positioning to set up
the area of coverage.
Looks like a PIR, works like a PIR, and unobtrusively captures video too. This is the covert PIR style camera you have been
waiting for to add indoor covert surveillance to PIR motion detector applications.
Features
Camera
• Color camera with SONY 1/3” Super HAD II CCD
sensor
• Employs Digital Signal Processor (DSP) chip-set
for high quality images
• High Resolution over 600TVL
• High sensitivity, low smear, high anti-blooming and
high S/N ratio for high performance video.
• Built-in functions: Auto Electronic Shutter (AES),
Auto Gain Control (AGC), Auto Trace White
Balance (ATW) Digital Wide Dynamic Range
(DWDR), 2D Noise
• Reduction (2DNR).
• DC power cable and video cable and power pigtail
provided
• Built-in anti-aliasing function to improve perceived
video image quality
PIR Motion Detector:
• IR motion sensor for intrusion protection with
minimum false alarm ratio.
• Adjustable sensitivity level
• Adjustable relay time 2-40 sec.
• Selectable 2 choices for pulse detection options
• Built-in anti tamper switch
Image Pick-up Device SONY 1/3’’ Super HAD II Color CCD
Effective Picture Elements NTSC: 768*494
Horizontal Resolution 600 TV lines
Minimum Illumination 0.05LUX @ F2.0
S/N Ratio More than 52 dB
Auto Electronic Shutter NTSC:1/60s~1/100,000s, PAL:1/50s~1/110,000s
Gamma Characteristic 0.45
Lens Furnished Pinhole lens 3.7mm / F2.0
Gain Control Automatic
White Balance ATW (2,000°K~10,500°K)
Digital Wide Dynamic Range DWDR ON
2D Noise Reduction 2DNR ON
Synchronous System Internal
Video Output BNC-F; 1 V p-p Composite Video / 75 ohm
Operating Temperature -10°C to 50°C (14°F to 122°F)
Humidity 20%~ 80% non-condensing
Power Requirements
(camera only)
PIR Detection Angle Horizontal = 100° / Vertical = 45°
PIR Detection Range 10m
PIR N.C/N.O Relay Output 2A @ 24 AC/DC
PIR N.C/N.O Alarm Time Adjustable from 2 to 40 sec.
Case Open Tamper Switch
Dimensions 4.72 x 2.76 x 1.89 inches
Weight 130 g / 0.29 lbs
12VDC regulated; 100mA
PIR Motion Detector
Built-in switch; trips alarm relay once if PIR case
is opened. Relay operation on switch activation is
same as if a PIR motion alarm is detected: single
relay event as per VR2/J4 settings. This is NOT a
separate ‘day zone’ or ’24 hour zone’ type independent/continuous tamper output.
Overall Mechanical
Ordering Information
ECMD200: Covert PIR Case Day/Night Camera with working PIR
Models vary in different countries. Visit www.everfocus.com and select your country for accurate ordering information.
Product specications are subject to change without notice. Visit www.everfocus.com for the most updated information.