Euro-Pro Infinity NV22-FS, Infinity NV22C-FS Owner's Manual

Owner’s Guide

NV22-FS | NV22C-FS

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS For Household Use Only

General Electrical Safety:

Unplug from electrical outlet when not in use and before servicing.

DO NOT use vacuum with a damaged cord or plug.
DO NOT pull or carry vacuum by the cord.
DO NOT unplug by pulling on cord; to unplug, grasp the plug, not the cord.
DO NOT handle plug or vacuum cleaner with wet hands.
DO NOT run the vacuum over the power cord.
DO NOT use the cord as a handle.
DO NOT close a door on the cord.
DO NOT pull cord around sharp corners.
DO NOT leave appliance when plugged in.

Keep cord away from heated surfaces.
Turn off all controls before plugging or unplugging vacuum cleaner.

Hose Attachments:
DO NOT use if air flow is restricted; if the air paths, the hose or the extension

tube become blocked, turn the vacuum cleaner off. Remove all obstructions
before you turn on the unit again.

Keep the end of the hose, wands and other openings away from face and body.
Keep rotating brush and suction openings away from hair, face, fingers,

uncovered feet or loose clothing.
Only use manufacturer’s recommended attachments.

General Use:

Use only as described in this manual.
DO NOT put any objects into openings.
Keep your work area well lit.
Keep the vacuum moving over the carpet surface at all times to avoid damaging

the carpet fibers.

DO NOT place vacuum on unstable surfaces such as chairs or tables.
DO NOT allow young children to operate the vacuum or use as a toy.
DO NOT use vacuum cleaner if it has been dropped, damaged, left outdoors or

submerged in water. Return to EURO-PRO Operating LLC for examination, repair
or adjustment.

When using an electrical appliance, basic
safety precautions should always be
observed, including the following:

READ ALL INSTRUCTIONS BEFORE
USING YOUR INFINITY UPRIGHT
VACUUM.

WARNING:

To reduce the risk of electric shock,
the two-pronged power cord plug
is polarized [one prong is larger
than the other]; it will fit into the
outlet only one way. DO NOT
force into outlet or try to modify
to fit.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK OR INJURY.

DO NOT USE OUTDOORS OR ON WET SURFACES:

Cyclonic Chamber/Dust Cup/Filters:

Before turning on the vacuum:

• Make sure that dust cup, cyclonic chamber and all filters are in place after
routine maintenance.

• Make sure that all components and filters are thoroughly dry after routine
cleaning.

• Only use filters and accessories provided by EURO-PRO Operating LLC
[Failure to do so will void the warranty.]

General Cleaning:
DO NOT run the vacuum over large-sized objects.
DO NOT pick up hard or sharp objects such as glass, nails, screws or coins that

could damage the vacuum cleaner.
DO NOT pick up smoking or burning objects such as hot coals, cigarette butts or

matches.
DO NOT pick up flammable or combustible materials such as lighter fluid,

gasoline, kerosene or use in areas where they may be present.
DO NOT pick up toxic solutions such as chlorine bleach, ammonia or drain

cleaner.
DO NOT use in an enclosed space where vapors are present from paint, paint

thinner, moth-proofing substances, flammable dust or other explosive or toxic
materials.

DO NOT vacuum up any liquids.
DO NOT immerse vacuum cleaner in water or other liquids.
DO NOT use outdoors or on wet surfaces; use only on dry surfaces.

Use extra care when cleaning on stairs.

Along with your upright unit, you will find the
following components:

Handle Assembly
Cleaning Attachments

Super Stretch Hose
Floor Power Nozzle

Vacuum Body

Cleaning Wand

Your Infinity Upright is easy
to assemble:

1 Lay your vacuum body on a level

surface.

2 Slide the electrical connection from

the power nozzle into the main body
to click into place.

3 Connect the hose from the main

body to the power nozzle; push with
a slight turning motion to create
a snug fit.

4 Slide the handle assembly into the

upright unit aligning the hose hook
on the handle assembly with the
power cord hooks on the back of
the unit.

5 Secure the handle assembly in place

with included nut/bolt (shipped
attached to handle assembly).

6 Place the vacuum in the upright

position.

7 Store the Crevice Tool, Dusting

Brush and Cleaning Wand on
the unit.

Getting Started

2

3

4

5

7

8 Attach the Super Stretch Hose:

a) Snap hose into swivel connector
b) Route under anti-tip hook
c) Route over upper hose holder
d) Press securely onto cleaning wand

IMPORTANT:

To prevent vacuum
from tipping, secure
hose under the
anti-tip hose hook.

IMPORTANT:

For suction to reach the Floor Power
Nozzle, the Cleaning Wand and
Super Stretch Hose must be attached
securely on the vacuum body.

9 When storing your vacuum, wind

cord around the two cord holders
and secure with cord clip:

• Quick Cord release at the top of
the unit – place in the upright
position.

• Second holder near the base –
turn until it is pointing down.

To release the cord, turn the Quick
Cord release to the left or right.

9

8

a

b

c

d