Euro-Pro GI475 User Manual

GI475

LIMITED WARRANTY

ONE (1) YEAR LIMITED WARRANTY

EURO-PRO Operating LLC warrants this product to be free from defects in material and
workmanship for a period of one (1) year from the date of the original purchase, when utilized for
normal household use, subject to the following conditions, exclusions and exceptions.

If your appliance fails to operate properly while in use under normal household conditions within
the warranty period, return the complete appliance and accessories, freight prepaid to

EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, NY 12901

If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC
will repair or replace it free of charge. Proof of purchase date and $ 9.95 to cover the cost of return
shipping and handling must be included. *

The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement
of the unit at our option. This warranty does not cover normal wear of parts and does not apply to
any unit that has been tampered with or used for commercial purposes. This limited warranty does
not cover damage caused by misuse, abuse, negligent handling or damage due to faulty
packaging or mishandling in transit. This warranty does not cover damage or defects caused by
or resulting from damages from shipping or repairs, service or alterations to the product or any of
its parts, which have been performed by a repair person not authorized by EURO-PRO Operating
LLC.

This warranty is extended to the original purchaser of the unit and excludes all other legal and/or
conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the
specific obligations expressly assumed by it under the terms of the limited warranty. In no event is
EURO-PRO Operating LLC liable for incidental or consequential damages of any nature
whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential
damages, so the above may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from
province to province.

*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of
purchase date and to attach tag to item before packing with your name, complete address
and phone number with a note giving purchase information, model number and what you
believe is the problem with item. We recommend you insure the package (as damage in
shipping is not covered by your warranty). Mark the outside of your package “ATTENTION
CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the
specifications contained herein are subject to change without notice.

Professional Steam Iron

With Headlight

OWNER’S MANUAL

Model GI475
120 V., 60 Hz

PRODUCT REGISTRATION CARD

Please complete and return within ten (10) days of purchase. The registration will enable us to
contact you in the event a product defect is discovered. By returning this card you acknowledge
to have read and understood the instructions for use, and warnings set forth in the accompanying
instructions. Please return to:

EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, NY 12901

GI475

_____________________________________________________________________________
Appliance model
_____________________________________________________________________________
Date purchased Name of store
_____________________________________________________________________________
Owner’s name
_____________________________________________________________________________
Address City State Zip Code

Printed in China

11

EURO-PRO Operating LLC

94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Tel.: [phone]
www.sharkcompany.com

IMPORTANT SAFETY INSTRUCTIONS

When using your iron, basic safety precautions should always be followed, including the following:

1. Read all instructions carefully.

2. Use iron only for its intended use.

3. To protect against risk of electrical shock,
do not immerse the iron in water or other
liquids.

4. Never yank cord to disconnect from outlet.
Grasp plug and pull to disconnect.

5. Do not allow cord to touch hot surfaces.
Let iron cool completely before putting
away.

6. Always disconnect iron from electrical
outlet when filling with water, emptying, or
when not in use.

7. Do not operate iron with a damaged cord,
or after the iron has been dropped or
damaged in any manner. To avoid the risk
of electric shock, do not disassemble the
iron. Return the iron to EURO-PRO
Operating LLC for examination and
repair. Incorrect reassembly can cause
the risk of electric shock when the iron is
used.

8. Close supervision is necessary for any
appliance being used by or near children.
Do not leave iron unattended while
connected or on an ironing board.

9. Burns can occur from touching hot metal
parts, hot water or steam. Use caution
when you turn a steam iron upside down;
there may be hot water in the reservoir.

10. Never use or rest iron on an unstable
surface.

11. While the iron is hot, never set iron on an
unprotected surface - even if it is on its
heel rest.

12. CAUTION! TO PREVENT ELECTRIC

SHOCK OR OTHER INJURY, before
filling the iron with water, make sure
that the plug is removed from the
outlet.

13. WARNING: Never fill the iron with
fabric conditioner, starches or any
other solution, as these will damage
the steam mechanism. Do not use
contaminated water.

14. CAUTION! TO AVOID FIRE, never leave

iron unattended while it is plugged in.

15. CAUTION! TO PREVENT ELECTRIC

SHOCK, never use the iron in a location
where it can fall or be pulled into water
or another liquid. If the iron falls into
water or other liquid, unplug it
immediately. DO NOT reach into the
water or liquid.

16. WARNING: Never use scouring pads,

abrasive or chemical cleaners, or
solvents to clean the exterior or
soleplate of your iron. Doing so will
scratch and/or damage the surface.

17. CAUTION! DO NOT aim iron at face,

towards yourself, or anyone else while
using or adjusting steam. Burns or
serious injury may occur.

18. Always store your iron standing upright, not
on the soleplate. If stored face down, even
the smallest amount of moisture will cause
the soleplate to corrode and stain.

19. This appliance is for household use

only.

WARNING: The power cord on this product

contains lead, a chemical known to the
State of California to cause birth defects or
other reproductive harm. Wash hands

after handling.

SPECIAL INSTRUCTIONS

1. To avoid a circuit overload, do not operate
another high-wattage appliance on the
same circuit.

2. If an extension cord is absolutely
necessary, use a 15-ampere cord. Cords
rated for less amperage may overheat.
Use care to arrange the cord so that it
cannot be pulled or tripped over.

TROUBLESHOOTING

PROBLEM POSSIBLE REASONS & SOLUTIONS

• Iron should be plugged into a 120V AC electrical

Iron does not heat

Thermostat ready light
goes On and Off

Some odor or small
particles come out of
steam vents of new
iron

Iron does not steam

outlet only.
Make sure that the plug is securely in the socket.

• Temperature setting too low.
Turn to higher setting.

• This is normal.
The light goes On and Off as the thermostat is
switching the heating element On and Off to
maintain the selected temperature.

• This is normal.

Follow instructions for first use and allow iron to steam
through 2-3 fillings & press the steam burst button
occasionally to eliminate small white particles.

• Water tank may be empty or water level is very low.

Add water.

• Make sure that the temperature control dial and

the variable steam control are correctly set. For
maximum steam, (setting "Max" on steam control),
temperature control dial should be set on "•••".

• Adjustable steam control is set on "0".

Always allow the iron to reach the selected
temperature with the adjustable steam control setting
at "0". Make sure the temperature control dial is set in
the correct steam area, e.g. "•", and the steam control

on "0". For more steam, turn temperature dial to

is not
higher setting, e.g. "•••", and the steam control to
"Max".

• If temperature setting and steam control setting are

correct and there is no steam, gently

tap the
soleplate on the ironing board a few times. Move
the variable steam control from "0" to "Max" a few
times.

POLARIZED PLUG: This appliance has a polarized plug (one blade is wider than

the other). As a safety feature, this plug will fit into a polarized outlet only one way.
If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to defeat this safety feature.

SAVE THESE INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

Rev. 03/04C1

Water droplets coming
from steam vents

• Iron may not be hot enough. Set thermostat to the
"Max" position. Always allow iron sufficient time to
heat up (thermostat light goes off) before activating
the variable steam control.

• Overuse of steam burst. Allow more time between
each burst.

• Iron may have been overfilled. Turn iron off,empty
water and follow instructions for filling.

• Steam performance may be low if iron requires
seasoning. To season, use regular tap water for 1or 2
tanks until steam performance improves.

10