Euro-Pro EP480CS User Manual

EP480CS
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of the original purchase, when utilized for normal household use, subject to the following conditions, exclusions and exceptions.
If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid to:
U.S.: EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, NY 12901 CANADA: EURO-PRO Operating LLC, 4400 Bois Franc, St. Laurent, QC, H4S 1A7
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This limited warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit. This warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alterations to the product or any of its parts, which have been performed by a repair person not authorized by EURO-PRO Operating LLC.
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the specific obligations expressly assumed by it under the terms of the limited warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential damages of any nature whatsoever. Some states/provinces do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province.
*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and to attach tag to item before packing with your name, complete address and phone number with a note giving purchase information, model number and what you believe is the problem with item. We recommend you insure the package (as damage in shipping is not covered by your warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.
Steam Iron
OWNER’S MANUAL
Model EP480CS 120 V., 60 Hz, 1600 Watt
PRODUCT REGISTRATION CARD
FOR CANADIAN CONSUMERS ONLY
Please complete and return within ten (10) days of purchase. The registration will enable us to contact you in the event a product defect is discovered. By returning this card you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions. Please return to:
EURO-PRO Operating LLC, 4400 Bois Franc, St. Laurent, QC, H4S 1A7
EP480CS _____________________________________________________________________________
Appliance model _____________________________________________________________________________ Date purchased Name of store _____________________________________________________________________________ Owner’s name _____________________________________________________________________________ Address City Prov. Postal Code
Printed in China
11
EURO-PRO Operating LLC
94 Main Mill Street, Door 16 Plattsburgh, NY 12901 Tel.: 1 (800) 798-7398 www.sharkcompany.com
IMPORTANT SAFETY INSTRUCTIONS
When using your iron, basic safety precautions should always be followed, including the following:
1. Read all instructions carefully.
2. Use iron only for its intended use.
3. To protect against risk of electrical shock, do not immerse the iron in water or other liquids.
4. The iron thermostat should always be turned to its lowest position before plugging in or unplugging from the electrical outlet.
5. Never yank cord to disconnect from outlet. Grasp plug and pull to disconnect.
6. Do not allow cord to touch hot surfaces. Let iron cool completely before putting away.
7. Always disconnect iron from electrical outlet when filling with water, emptying, or when not in use.
8. Do not operate iron with a damaged cord, or after the iron has been dropped or damaged in any manner. To avoid the risk of electric shock, do not disassemble the iron. Return the iron to the nearest service facility for examination and repair. Incorrect reassembly can cause the risk of electric shock when the iron is used.
9. Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended while connected or on an ironing board.
10. Burns can occur from touching hot metal parts, hot water or steam. Use caution when you turn a steam iron upside down; there may be hot water in the reservoir.
11. Never direct steam at any person, especially when using the iron in the vertical position. The steam is very hot and can cause burns.
12. This appliance is for household
use only. WARNING: The power cord on this
product contains lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands
after handling.
SPECIAL INSTRUCTIONS
1. To avoid a circuit overload, do not operate another high-wattage appliance on the same circuit.
2. If an extension cord is absolutely necessary, use a 15-ampere cord. Cords rated for less amperage may overheat. Use care to arrange the cord so that it cannot be pulled or tripped over.
POLARIZED PLUG: This appliance has a polarized plug (one blade is
wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do no attempt to defeat this safety feature.
SAVE THESE INSTRUCTIONS
For Household Use Only
TROUBLESHOOTING
PROBLEM POSSIBLE REASONS & SOLUTIONS
• Iron should be plugged into a 120V AC electrical
Iron does not heat
Thermostat ready light goes On and Off
Some odor or small particles come out of steam vents of new iron
Iron does not steam
Water droplets coming from steam vents
outlet only. Make sure that the plug is securely in the socket.
• Temperature setting too low. Turn to higher setting.
• This is normal. The light goes On and Off as the thermostat is switching the heating element On and Off to maintain the selected temperature.
• This is normal.
Follow instructions for first use and allow iron to steam through 2-3 fillings & press the steam burst button occasionally to eliminate small white particles.
• Water tank may be empty or water level is very low.
Add water.
• Make sure that the temperature control dial and
the variable steam control are correctly set. For maximum steam, (setting "Max" on steam control), temperature control dial should be set on "•••".
• Adjustable steam control is set on "0".
Always allow the iron to reach the selected temperature with the adjustable steam control setting at "0". Make sure the temperature control dial is set in the correct steam area, e.g. "•", and the steam control
on "0". For more steam, turn temperature dial to
is not higher setting, e.g. "•••", and the steam control to "Max".
• If temperature setting and steam control setting are
correct and there is no steam, gently soleplate on the ironing board a few times. Move the variable steam control from "0" to "Max" a few times.
• Iron may not be hot enough. Set thermostat to the
"Max" position. Always allow iron sufficient time to heat up (thermostat light goes off) before activating the variable steam control.
• Overuse of steam burst. Allow more time between
each burst.
• Iron may have been overfilled. Turn iron off,empty
water and follow instructions for filling.
• Steam performance may be low if iron requires
seasoning. To season, use regular tap water for 1or 2 tanks until steam performance improves.
tap the
1
Rev. 11/04B
10
Loading...
+ 4 hidden pages