Unison Echo 0-10V Dimming Controllers offer fully-rated 20-amp
relays coupled with 0-10V dimming for direct control of compatible
LED drivers and fluorescent dimming ballasts. The Controller mounts
to fixtures and electrical junction boxes.
APPLICATIONS
• Houses of worship
• Education
• Hospitality
• Healthcare facilities
• Office buildings
• Conference rooms
• Meeting rooms
• Retail
FEATURES
• Single- and dual-zone options
• 20A fully-rated relay for use with general purpose, tungsten,
fluorescent and LED loads
• Fully isolated 0-10V dimming for direct connection to
dimming ballasts and LED drivers
• 120/277VAC power input
• Plug and Play: ready to go out of the box, no software or
external programming required
• Supports Unison Echo control stations and responsive controls
• EchoConnect®: Two-wire topology-free system gives you the
freedom to put stations where you need them
- Up to 16 Echo control products
- Up to 16 Echo output products
- Up to 500 meters (1640 feet) of control wire per system
GENERAL
• UL and cUL LISTED
• Rated for plenum use
• Supports Demand Response via EchoConnect
ORDERING INFORMATION
Echo 0-10V Dimming Controller
MODELDESCRIPTION
ELD-G2Echo Single-zone 0-10V Controller
EDLD-G2Echo Dual-zone 0-10V Controller
Echo Power Requirements
EchoConnect:One unit of output power
Auxiliary Power:Not required
Echo Presets
Supports 16 Echo Presets
1 of 6
Page 2
Unison Echo 0-10V ControllerETC
Echo Distributed Power Series
SPECIFICATIONS
FUNCTIONAL
• Control for individual fixtures, zone power and 0-10V dimming for fluorescent ballasts and LED drivers
• Plug and Play: ready to go out of the box, no software or external programming required
• Interacts with Unison Echo control stations and responsive controls
MECHANICAL
• Constructed of injection-molded ABS plastic
• Single-zone and dual-zone options
• Button interface and LED indicator per zone for configuration
• Rotary dials for selection of space and zone number
• Half-inch conduit knockout mounted
• Mains-voltage and 0-10V wiring exits through knockout mount
• EchoConnect wiring exits through side of controller
• Optional mounting plate available for applications that require low-voltage wiring to be in conduit
• MicroSD for field software upgrades
• Mains power input:
- 12 AWG Hot - Black
- 14 AWG Neutral - White
• Relay output:
- Zone 1, 12 AWG - Red
- Zone 2, 12 AWG - Red/White (Dual-zone only)
• 0-10V dimming output:
- Zone 1, 22 AWG - Violet and Gray
- Zone 2, 22 AWG - Violet/White and Gray/White (Dual-zone only)
• EchoConnect control connection:
- Control, 18 AWG - Black and White
- Ground, 18 AWG - Green/Yellow
ELECTRICAL
• 120V-277V, 60Hz power input
• Normally Open (NO) 20A fully-rated relay
• 0-10vDC ballast control (sink) rated for 100mA maximum, fully isolated from ground
• EchoConnect Class 2 control network
- Topology-free wiring using Belden 8471 or equivalent and one #18 ESD drain wire
- Wiring may be bus, loop, homerun or any combination of these
• Up to 500 meters (1640 feet) of control wiring per system
• Optional Cat5/5e wiring using Belden 1583A or equivalent
- Requires optional Cat5 termination accessories
• UL and cUL LISTED
• Conforms to UL 508 and UL 2043
THERMAL
• Ambient room temperature: -10 to 45°C / 14 to 113°F
• Ambient humidity: 5 to 95% non-condensing
2 of 6
Page 3
ECHO FAMILY OF PRODUCTS
Unison Echo 0-10V ControllerETC
Echo Distributed Power Series
EchoConnect Power Supplies
MODELDESCRIPTION
E-SPS6U Room Station Power Supply, Knockout Mount
E-SPS-DIN16U DIN rail Station Power Supply with 24V Aux
E-SPM16U DRd Station Power Module
E-SPM-A16U DRd Station Power Module with 24V Aux
E-SPM-RM16U Rack-Mount Station Power Module Aux
E-SPM-RM-A16U Rack-Mount Station Power Module 24V Aux
E-SPM-WM16U Wall-Mount Station Power Module
E-SPM-WM-A16U Wall-Mount Station Power Module 24V Aux
E-APS24V Aux Power Supply, Knockout Mount
Echo Stations
MODELDESCRIPTION
E1001Inspire One Button Station
E1002Inspire Two Button Station
E1004Inspire Four Button Station
E1006Inspire Six Button Station
E1008Inspire Eight Button Station
E1104Inspire Four Button with Fader Station
EPS05Echo Preset Station - 5 Button
EPS10Echo Preset Station - 10 Button
EPSLOEcho Lockout Station
E-ATCEcho TimeClock
Echo Responsive Controls
MODELDESCRIPTION
ELSLight Sensor
EOCCCeiling-Mount PIR Occupancy Sensor
EVACCeiling-Mount PIR Vacancy Sensor
E-DOC-CCeiling-Mount Dual Tech Occupancy Sensor
E-DVAC-CCeiling-Mount Dual Tech Vacancy Sensor
E-DOC-WWall-Mount Dual Tech Occupancy Sensor
E-DVAC-WWall-Mount Dual Tech Vacancy Sensor
E-DOC-SM1Switch-Mount Dual Tech Sensor - One Button
E-DOC-SM2Switch-Mount Dual Tech Sensor - Two Button
Echo Interfaces
MODELDESCRIPTION
EACCEchoAccess Interface
EEBEcho Expansion Bridge
EDMXCEcho DMX Scene Controller
EEIEcho-Echofl ex Interface
ECIIEcho Contact Input Interface
ECOIEcho Contact Output Interface
EDRIEcho Demand Response Interface
Zone Controllers
MODELDESCRIPTION
ERC-G2One Zone Relay Controller
EDRC-G2Two Zone Relay Controller
ELD-G2One Zone 0-10V Controller
EDLD-G2Two Zone 0-10V Controller
ESSC-G2One Zone SmartSpace Controller
EDSSC-G2Two Zone SmartSpace Controller
ELVD-G2600-Watt Phase Adaptive Dimmer
ELVD-277-G2600-Watt Phase Adaptive Dimmer- 277V
Room Controllers
MODELDESCRIPTION
ERMC4-G2Four Zone Room Controller
ERMCT4-G2Four Zone Room Controller with TimeClock
ERMC8-G2Eight Zone Room Controller
ERMCT8-G2Eight Zone Room Controller with TimeClock