Esotec Shine Operating Manual

GB

Contents

1. Introduction Page 5

2. Safety Instructions Page 5

3. Usage in accordance with requirements Page 6

4. Initiation Page 6

5. Accumulator Exchange Page 7

6. Malfunctions Page 7

7. Technical Data Page 7

1. Introduction

Dear Costumer,
Thank you for purchasing the solar light.
With this solar light you purchased a product manufactured according to the current state of
technology.

This product fulfils all requirements of the valid European and national regulations.
The conformity was proved. The relevant declarations and documentation are deposi­ted with the manufacturer.

To maintain this state and guarantee a safe operation, you as the user will have to follow this
operating manual!

2. Safety Instructions

- In case of damages caused by not following this operating
manual, the warranty rights will expire! We exclude liability for
any consequential damages!

- We exclude liability for property or personal damages caused by
inappropriate handling or not following the safety instructions.

- In these cases any guarantee rights will expire.

Due to safety and admission reasons (CE) it is not allowed to arbitrarily reconstruct and/or
change the solar light.
Therefore, please keep to the operating manual.
The accident prevention rules of the association of the industrial trade cooperative associa­tion for electric plants and working material are to be considered in industrial environments

!

These instructions relate ONLY to this product and contain important information for
using the product for the first time. Please keep these instructions for later reference
and should always accompany the product in the event of transference to a new
user.

GB

3. Usage in Accordance with Requirements

The solar light is constructed for the outdoor usage and operation. The integrated accumu­lators are charged by the solar cell in the upper part of the light. At darkness, the light is auto­matically switched on and is switched out at sunrise. A very strong light emitting diode (LED)
is installed. This LED guarantees a strong luminosity with only slight power consumption.

-- However, please note that the duration of illumination may decrease due to a lack of
sunshine as well as in the winter months--

In case of longer periods without sunshine (insolation) the accumulator is charged only insuf­ficiently and is thus not able to guarantee a permanent readiness for operation. However, this
does not indicate that the solar light is defect. Please wait for the next sunny days and the
light will again be working accordingly.

4. Initiation

1.Please carefully take all parts out of the pack­age.

2.Take the light into your hand as shown in the
picture. Slightly press in the stainless steel
board on the bottom part (1) and remove the
upper part (2).

3.Fix the light to the wall with the enclosed scr­ews through the upper opening.

4.Connect the accumulator plug with the socket
(3) of the board.

5.Put in the upper part with the module and
catch it with a swing in the bottom.

The solar light is now activated.

Note: The duration of illumination is strongly
dependent of the intensity and duration of suns­hine during the day. During the winter months
the duration of illumination will generally be
shorter.

1.

2.

3.