Escort Smartsite User Manual
Specifications and Service
Warranty
SPECIFICATIONS
Monitor
LCD profile widescreen ratio ..............................................16:9 (4.3")
View angle (U/D/L/R) ........................................................50/70/70/70
Resolution ................................................................480 x 3 (RGB) x 272
Brightness (cd/m2) ...............................................................................400
Contrast ratio .......................................................................................500:1
Response time (ms) (at 25°C) ...............................................................15
Power requirement ..............................................................12V/24V DC
Power consumption ........................................................................... ≤5W
Operating temperature range ......................................-20°C to 70°C
Storage temperature range ...........................................-30°C to 80°C
Dimensions (mm) .......................................... 280 (L) x 91 (W) x 30 (D)
Weight (approx.) (gm) .................................580 (including bracket)
Camera
Image sensor: ..................CMD Digital-Clarity Active Pixel Image
Video system: .......................................................................................NTSC
Resolution: ...............................................................................480 TV Line
View angle: ............................................................................... 160 degree
Working voltage: ......................................................................9–16 V DC
Waterproof
Accessories
5m Y cable
Silicon tape
SERVICE
Do not attempt to service the unit yourself, as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
To obtain service: Contact ESCORT (800-543-
1608) to obtain a Return Authorization Number.
Properly pack your product and include: your
name, complete return address, written
description of the problem with your product,
daytime telephone number, and a copy of the
original purchase receipt. Label the outside of
the package clearly with your Return
Authorization number. Ship the product prepaid
(insured, for your protection) to: ESCORT Inc.,
5440 West Chester Road, West Chester, OH
45069.
Out-of-warranty repairs:
For out-of-warranty repairs, include prepayment
in the amount you were quoted by the ESCORT
Customer Service Representative. If your
SmartSite has been damaged, abused, or
modified, the repair cost will be calculated on a
parts-and-labor basis. If it exceeds the basic
repair charge, you will be contacted with an
estimate. If the additional payment is not
received within 30 days (or if you notify us that
you do not wish to have your SmartSite repaired
at the price quoted), the unit will be returned
without repair. Payment can be made by check,
money order, or credit card.
ESCORT Inc.
5440 West Chester Road
West
Chester OH 45069
800.433.3487
www.Esco
©2011 ESCORT Inc . ESCORT® and SmartSite™ are trademarks
of ESCORT Inc.
Features, specifications and prices subject to change
without notice.
rtInc.com
ESCORT One-Year Limited Warranty
What this warranty covers: ESCORT warrants
your product against all defects in materials and
workmanship.
For how long: One (1) year from the date of the
original purchase
What we will do: ESCORT, at our discretion, will
either repair or replace your product free of
charge.
What we will not do: ESCORT will not pay
shipping charges that you incur for sending your
product to us.
What you must do to maintain this
warranty: Show original proof of purchase
from an authorized ESCORT dealer.
Warranty exclusions: Warranty does not apply
to your product under any of the following
conditions:
The serial number has been removed or
modified.
Your product has been subjected to misuse or
damage (including water damage, physical
abuse, and/or improper installation).
Your product has been modified in any way.
Your receipt or proof of purchase is from a nonauthorized dealer or Internet auction site,
including E-bay, U-bid, or other non-authorized
resellers.
You are not the original purchaser of the
product from an authorized dealer or did not
receive it as a gift from the original purchaser of
product from an authorized dealer.
FCC ID: S20711281303-EF.
This equipment has
been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of
the FCC rules. These limits are designed to
provide reasonable protection against harmful
interference when the equipment is operated in
a commercial environment.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with this user
manual, may cause harmful interference to radio,
in which case, the user will be required to correct
the interference at their own expense.
Any changes or modifications in construction
of this device that are not expressly approved by
the party responsible for compliance could void
the user’s authority to operate the equipment.
4
R E A R V I E W C A M E R A S Y S T E M
Owner’s Manual
Installation
Controls and Operation
Features
• The SmartSite 4.3" color LCD mirror is
designed for vehicle rearview monitoring.
• Combines normal mirror image and reversing
rear camera image.
• Three screen set options: left, middle, or right
side of mirror monitor.
• SmartSite attaches in place of most originally
equipped factory rearview mirrors.
• Built-in interface function can support up to
two cameras.
• Automatically displays reverse camera view
when reverse gear is engaged.
• Reversing function camera always has highest
priority.
• Mirror can be installed in both 12 volt and 24
volt vehicles.
• Special anti-glare treatment.
• Includes high/low voltage and short circuit
protection.
Safety and Installation Guidelines
• Secure the monitor in such a way that it
cannot become loose under any circumstance
(sudden braking, accidents) and cause injury
to the occupants of the vehicle.
• Do not attach the mirror in the area that my be
used by an airbag, as this could cause injury if
the airbags are triggered.
• The picture quality can be impaired in the
vicinity of electromagnetic fields. For this
reason, do not mount the monitor near
loudspeakers.
• Do not drop, open, submerge or spill liquid on
the monitor.
• Do not operate the monitor if the housing has
been damaged.
• Do not press on the LCD display.
Mirror Monitor Installation
1 Remove the factory rearview mirror from the
vehicle.
2 Adjust the angle of the mirror monitor by
rotating the ball joint on the bracket to the best
position.
3 Unscrew the silver lug and slide the mirror
monitor onto the original metal lug on the
widescreen.
4 Fix the screw firmly.
NOTE: If our bracket is not compatible with the
vehicle’s original mirror, then you have to prepare
the glue to either attach the monitor on the
windshield or elsewhere. The mirror monitor
bracket is detachable.
Power Connection
CAUTION: Before making any connections,
disconnect the ground terminal of the vehicle
battery to avoid short circuits.
1 Connect the RED wire to a positive (12V or 24V)
power terminal, which is energized with the
ignition key in the accessory position.
2 Connect the BLACK wire to a suitable negative
connection point on the vehicle.
3 Connect the GREEN wire (CAM 1 trigger) to
the switched power output terminal of the “R”
(reverse) gear. The CAM 1 trigger is always in
priority.
Mirror Monitor Operation
When you turn the ignition to the accessory or
ON position, power is supplied and the front LED
light will turn red. No image will be displayed on
the monitor. You must press CAM SELECT
engage reverse gear to activate the camera.
Mirror Monitor Controls
CAM SELECT/
Press button to select CAM 1 or CAM 2. Or, hold
for more than 2 seconds to power off the
monitor (standby). Press again to power on.
MENU
Contrast Control
To adjust the display contrast, press MENU,
choose CONTRAST on the screen display, and
press + or – to increase or decrease contrast.
Brightness Control
To adjust the display brightness, press MENU,
choose BRIGHTNESS on the screen display, and
press + or – to increase or decrease brightness.
Color Control
To adjust the display color, press MENU, choose
COLOR on the screen display, and press + or - to
increase or decrease color contrast.
/ or
Normal/Mirror Image Setting
If your camera and control box has a Normal/
Mirror function, you can change these settings
for CAM 1 and CAM 2 separately.
Press MENU, tap MIR1 OFF on the screen
display and press + or – to select mirror or
normal image for CAM 1. You can set the CAM 2
image in the same way.
Park (on)
To adjust the settings for the parking assist line
(which helps you judge distance while in
reverse), press MENU, tap Park (on) on the screen
display, and press + or – to activate it.
The parking assist line only appears when the
reverse gear is engaged. It can be adjusted
horizontally by pressing + or – to your preferred
height for the current parking conditions. The
setting is saved in memory.
Cleaning and Maintenance
• If your vehicle has been parked in direct
sunlight allow the monitor to cool off before
operating.
• Unplug or power off before cleaning. Clean
the monitor with a slightly damp soft cloth,
using only mild household detergent.
• Do not use liquid or aerosol cleaners, or strong
solvents to clean the monitor as they might
damage the finish.
• Do not block or cover the holes on the
monitor. Their function is for ventilation to
keep the unit from overheating.
• Do not push objects of any kind into the
monitor through the ventilation holes, as this
may result in fire or electric shock.
• Do not submerge the monitor or spill any kind
of liquid on it.
NOTE: The plugs should be fully inserted into the
connectors or jacks. A loose connection may cause
malfunction of the unit.
2
3
Loading...