Escort Smartmirror User Manual

N A V I G A T I O N W I T H A V I E W

P o w e r e d B y N A V I G O N

User’s Guide

ESCORT INC
5440 West Chester Rd.
West Chester, OH 45069

The information contained herein may be changed at any time without prior notication. This

manual or any parts thereof may not be reproduced, may not be transmitted in any form
either electronically or mechanically, including photocopying and recording, for any purpose
whatsoever without the express written consent of ESCORT INC and NAVIGON, INC. All

technical specications, drawings and documents are subject to copyright law.

© 2007-2009, NAVIGON, INC
© 2007-2009, ESCORT INC
All rights reserved.

ii ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

End User License Agreement

End User License Agreement (“Agreement”) – This is a legal agreement between you, the end
user, and AZENTEK, LLC/NAVIGON, Inc. (“AZENTEK/NAVIGON”). By using all or any portion of
the Software you are agreeing to be bound by the terms of this agreement. This Agreement
applies to the use of software, pre-installed software on any of our hardware devices and accom­panying items, including on CD-ROM, floppy disc, memory card, download package or any other
data carriers, and all contents and contents programs (“Software”).

Please read this Contract carefully. By using this software you agree that this Agreement is
enforceable like any written negotiated Agreement signed by you. This Agreement is enforceable
against you and any legal entity that obtained the software.

If you do not agree to the terms of this Agreement, promptly return the unused software,
unopened disk package and the accompanying items to the place where you obtained them for a
full refund.

1. OWNERSHIP: It is hereby understood and agreed by you that AZENTEK/NAVIGON is
the owner of all title, ownership rights, intellectual property rights and copyrights in and to the Soft­ware. The Software shall remain the sole and exclusive property of AZENTEK/NAVIGON and its
licensors and AZENTEK/NAVIGON and its licensors will retain all patents, copyrights and other
intellectual property rights in the Software, as applicable. You also hereby understand and agree
that AZENTEK/NAVIGON and/or its third party licensors own all right, title and interest in and to all
content included in the Software, including, but not limited to, all intellectual property rights therein
(the “Content”).

2. GRANT OF LICENSE: AZENTEK/NAVIGON grants you the right to use one copy of the
Software, provided it is used on only one computer or hardware device at any time. The Software
is in “use” on a computer or hardware device when it is loaded into temporary memory (e.g., hard
disk, CD-ROM, or other storage device) of that computer. This license does not grant any right to
obtain future upgrades, updates or supplements (“upgrades”) of the Software. Any updates are
similarly governed by this Agreement and any accompanying amendments. Updates may be

subject to additional costs and provisions.

3. OTHER RESTRICTIONS: Except for the initial loading of the Software onto a Hardware
Device or for archival/backup purposes as provided for above, you may not rent or lease, broad­cast, present, transfer, or distribute the Software and accompanying written materials. You may
not reverse engineer, decompile, reverse engineer or disassemble the Software. If Software is an
upgrade, any transfer must include the upgrade and all prior versions. All rights not specifically
granted in this Agreement are reserved by AZENTEK/NAVIGON.

4. TRANSFER: You may transfer the Software and this Agreement to another party to whom
you may transfer the hardware devices and accompanying items if the other party agrees to
accept the terms and conditions of this Agreement. If you transfer the Software, you must simul­taneously either transfer all copies whether in printed or machine-readable form to the same party
or destroy any copies not transferred, including all modifications and portions of the program con­tained or merged into other programs.

You shall not sub-license, lease, assign, or transfer the Agreement or the Software except as
expressly provided in this Agreement. Any attempt otherwise to sublicense, lease, assign, or
transfer any of the rights, duties, or obligations hereunder renders this License VOID.

5. LIMITATION OF WARRANTIES AND LIABILITIES: EXCEPT FOR THE LIMITED WAR­RANTY DOCUMENT INCLUDED WITH THE HARDWARE DEVICE, IF ANY, AND TO THE MAX­IMUM EXTENT PERMITTED BY APPLICABLE LAW, ALL SOFTWARE, OTHER COMPONENTS
THEREOF AND SERVICES ARE PROVIDED ON AN “AS IS” BASIS. YOU EXPRESSLY

2009 ESCORT SmartMirror User’s Guide iii
Revision 1.0 ESCORT INC / NAVIGON INC

ACKNOWLEDGE AND AGREE THAT YOUR USE OF THE SOFTWARE IS AT YOUR SOLE
RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE,
ACCURACY AND EFFORT IS WITH YOU. EXCEPT AS OTHERWISE EXPRESSLY STATED IN
THIS AGREEMENT, AZENTEK/NAVIGON DOES NOT MAKE, AND HEREBY EXPRESSLY DIS­CLAIMS, ANY AND ALL EXPRESS AND/OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PUR­POSE, NONINFRINGEMENT AND TITLE, AND ANY WARRANTIES ARISING FROM A
COURSE OF DEALING, USAGE OR TRADE PRACTICE. YOU UNDERSTAND AND AGREE
THAT THE USE OF THE SOFTWARE IS DONE AT YOUR OWN DISCRETION AND RISK AND
THAT YOU WILL BE SOLELY RESPONSIBLE FOR ANY DAMAGES.

TO THE MAXIMUM EXTENT PERMITTED BY LAW AND EXCEPT AS OTHERWISE
EXPRESSLY STATED IN THIS AGREEMENT, AZENTEK/NAVIGON WILL NOT BE LIABLE OR
RESPONSIBLE TO YOU OR ANY OTHER PERSON OR ENTITY FOR ANY TYPE OF DIRECT,
INCIDENTAL, SPECIAL, PUNITIVE, INDIRECT OR CONSEQUENTIAL DAMAGES, INCLUD­ING, BUT NOT LIMITED TO, LOST REVENUE, LOST PROFITS, REPLACEMENT GOODS,
LOSS OF PROPRIETARY MATERIAL, RIGHTS OR SERVICES, BUSINESS INTERRUPTION,
LOSS OR CORRUPTION OF ELECTRONIC COMMUNICATIONS, OR INTERRUPTION OR
LOSS OF USE OF SERVICES OR EQUIPMENT, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES, OTHER PECUNIARY LOSS, AND WHETHER ARISING UNDER THEORY
OF CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE,
EVEN IF NAVIGON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR
THEY ARE FORESEEABLE. IN NO EVENT SHALL AZENTEK/NAVIGON’S TOTAL LIABILITY
(WHETHER ARISING UNDER A THEORY OF CONTRACT, TORT, INCLUDING NEGLIGENCE,
STRICT LIABILITY OR OTHERWISE) UNDER OR IN CONNECTION WITH THIS AGREEMENT
OR BASED ON ANY CLAIM FOR INDEMNITY OR CONTRIBUTION EXCEED THE AMOUNT
OF PURCHASE PRICE OF THE AGREEMENT. SOME JURISDICTIONS DO NOT ALLOW THE
LIMITATION OF LIABILITY FOR PERSONAL INJURY, OR OF INCIDENTAL OR CONSEQUEN­TIAL DAMAGES, SO THIS LIMITATION MAY NOT APPLY TO YOU.

6. CONFIDENTIALITY: You acknowledge that the Software contains proprietary trade
secrets and you hereby agree to maintain the confidentiality of Software and not to disclose or
provide access thereto to any person.

7. THIRD PARTY SOFTWARE LICENSES: AZENTEK/NAVIGON may make use of third
party software. Notwithstanding the terms and conditions of this License, use of some third party
materials included in the Software may be subject to other terms and conditions.

8. TERMINATION: This Agreement automatically terminates if you fail to comply with the
terms hereof or if you attempt to assign the Agreement or transfer the Software to a third party
except as expressly permitted in this Agreement. If such should occur, you must destroy all cop­ies of the Software and all of its component parts. All provisions of this Agreement, except for the
license grant above, survive the termination of this Agreement.

9. ENTIRE AGREEMENT: The terms and conditions of this Agreement, including any
addendum or agreement to it which may be included with the accompanying package of the Soft­ware (and/or Hardware), plus the Limited Warranty, if applicable, reflect the entire agreement
between You and AZENTEK/NAVIGON with respect to the subject matter hereof and will
supersede and replace all prior understandings and agreements, in whatever form, regarding the
subject matter. This Agreement shall not be modified or amended except in writing signed by
AZENTEK/NAVIGON. This Agreement shall take precedence over any other documents that
may be in conflict therewith.

10. TRANSLATIONS: The original English version of this Agreement may have been
translated into other languages. The English version of this Agreement is the controlling version.

iv ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

11. JURISDICTION AND DISPUTES

This Agreement is governed by the laws of the State of Illinois without regard to its conflict of laws
rules.

All disputes hereunder shall be resolved in the applicable state or federal courts of the State of Illi­nois located within Cook County, Illinois. To the extent permitted by law the parties consent to the
jurisdiction of such courts, agree to accept service of process by mail, and waive any jurisdictional
or venue defenses otherwise available.

12. SEVERABILITY

If at any time any one or more of the provisions of this Agreement become invalid, illegal or unen­forceable in any respect for any reason, the validity, legality and enforceability of any such provi­sion in every other respect and of the remaining provisions of this Agreement shall not be in any
way impaired.

2009 ESCORT SmartMirror User’s Guide v
Revision 1.0 ESCORT INC / NAVIGON INC

Introducing the ESCORT SmartMirror

Thank you. You’ve just purchased the most innovative GPS navigation technology in the world—

the ESCORT SmartMirror. The ESCORT SmartMirror offers GPS–based navigation, millions of
Points Of Interest (POIs), and real time navigation so you’re never lost.

The ultimate in driving convenience, the ESCORT SmartMirror installs in place of your rearview

mirror—then SmartMirror gives you complete GPS functionality while eliminating the need for

suction cups, mounting brackets and wires.

And the ESCORT SmartMirror is Bluetooth ready (compatible phones)—allowing you to drive

hands-free with your cell phone.

ESCORT SmartMirror features include:

OEM Replacement Mirror

• ESCORT SmartMirror easily replaces your rearview mirror

• Includes Integrated GPS Navigation powered by Navigon

• 2GB SD card slot lets you store/display maps, pictures, and even e-books

• Built-in GPS receiver with high-gain (16 channel) dual antenna design

• Large 4” Touch screen LCD monitor with 16:9 widescreen aspect ratio

• Integrated speaker

• Advanced high-speed (400 MHZ) digital processing

• Generous 64MB internal memory

• Expandable Video inputs (2) with reverse camera input sensing (camera not included)

Built-in GPS Navigation

• Real time navigation and trafc information

• Navigon Mobile Navigator with Reality View™—displays street level preview

• All major intersections

• Points of interest

• Interstate entrances and exits

• Spoken text-to-speech directions, street names and points of interest

• audible callouts let you know exactly where you are and what’s ahead!

• Lane Assistant and Reality View for intuitive, easy driving directions

• Stunning 2D and 3D maps

• Sight assisted map views that adapt to your personal needs

• Easy-to-operate user menus

Built-in Bluetooth functions (compatible phones)

• Incoming calls/caller ID appear on SmartMirror display

• Answer calls hands-free

• Call history log

• Manual or Auto call answering

• Uninterrupted call transfer return-to-phone upon destination arrival

Note: ESCORT SmartMirror is compatible with an optional back up camera—please call
ESCORT at 1.800.433.3487 for details.

If this is your rst experience with GPS navigation, please read the manual in detail to get the

most out of your ESCORT SmartMirror performance and innovative features.

Please drive safely.

vi ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Introduction

About this manual

Introduction

About this manual

Introduction

About this manual

Conventions

For better legibility and clarification, the following styles are used in this manual:

Bold and italics: Registered names, company and product descrip-

tions.

SMALL CAPITALS: WINDOW AND DIALOG BOX TITLES.

Bold: Highlighting of important parts in the text.

Underlined

: Descriptions of buttons, input fields and other elements on

the user interface.

Symbols

The following symbols refer to specific passages of text:

Warnings

Instructions and tips for operating the software

More detailed information and explanations

Legal notice

Liability

The software and the manual are subject to change without notice. ESCORT INC/
NAVIGON, INC are not liable for the accuracy of the information contained in this
manual or for damages resulting from the use of this manual.

2009 ESCORT SmartMirror User’s Guide 1
Revision 1.0 ESCORT INC / NAVIGON INC

Introduction

Customer Service

Trademarks

All brands and trademarks mentioned in this document are possibly registered by third
parties and are subject to the current legislation and to the rights of their respective
owners without reservation. All mentioned names of products, societies, or brands
may be registered trademarks of their respective owners. Every right that is not explic­itly accorded is reserved.

The absence of the explicit labelling of registered trademarks used in this manual

does not imply that the brand is not subject to the rights of a third party.

Microsoft, Windows and Excel are trademarks of the Microsoft Corporation.

NAVIGON is a registered trademark of NAVIGON, INC.

ESCORT is a registered trademark of ESCORT INC.

NAVTEQ is a registered trademark of NAVTEQ.

SmartMirror is a trademark of ESCORT INC.

Customer Service

Our service team is available via telephone or E-mail.

Telephone Support

Telephone: [phone] (Toll Free)

Service Hours: Monday through Friday, 8 a.m. to 6 p.m. ET

(except official holidays)

E-mail

To ensure as timely a response via e-mail, please direct support inquries to
[e-mail].

Internet

For more information, please visit us at ESCORTSmartMirror.com.

2 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Welcome

Welcome

Introducing the SmartMirror

Welcome to the exciting world of GPS navigation. The SmartMirror offers Global Posi­tioning System (GPS)–based navigation and millions of Points Of Interest (POIs).

1 Mirror

2 Answer (Phone)

3 Hangup (Phone)

4 On/Off + Video Select

5 Bluetooth Pair (When in Bluetooth Menu)

6 Main Menu

7 Touch Screen

8 SD memory card slot

2009 ESCORT SmartMirror User’s Guide 3
Revision 1.0 ESCORT INC / NAVIGON INC

Welcome

Introducing the SmartMirror

About GPS navigation

GPS is based on a total of 24 satellites that circle the earth and are constantly trans­mitting their position. The GPS receiver uses this data and calculates its own geo­graphical position on the basis of the information transmitted by the various satellites.

For a sufficiently precise positioning it is necessary to obtain the data from at least
three satellites. With the data from 4 or more satellites the altitude above sea level can
also be ascertained. The determination has an accuracy of about 3 yards.

Once the navigation device has determined your position, it can be used as a starting
point for route calculation.

The map data on your navigation device includes the geographical coordinates of all
digitally recorded Points Of Interest (POIs), streets and places. This enables the
device to calculate a route between a starting point and a destination.

The calculation of the current position and its representation on the map takes place
once every second so your current position is always shown on the map.

If GPS reception is impaired, navigation is interrupted. The navigation software
remains active.

As soon as GPS reception is restored, the navigation system calculates any change
of position which has occurred in the meantime. Navigation may simply be continued.

Caution!

The United States government operates the Global Positioning System
(GPS) and is solely responsible for its accuracy and maintenance. Changes by the
United States government may affect the accuracy and performance of all GPS
equipment, including your personal navigation device.

Caution!

Ordinances or laws may restrict use of certain abilities of your navigation
device on public or private land

.

4 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Getting Started

What’s included

The SmartMirror comes with the following accessories. If the contents are incomplete,
please notify us within 30 days of purchase. The purchased product includes:

• a. Mirror with attached GPS antenna

• b. Windshield mounting bracket

• c. Microphone

• d. External GPS antenna (Not required for most installations)

• e. Power Supply

2009 ESCORT SmartMirror User’s Guide 5
Revision 1.0 ESCORT INC / NAVIGON INC

Getting Started

Important safety information

Important safety information

Please read the following notices and safety information carefully before starting to
use your navigation system.

Navigation safety information

Use this navigation system at your own risk.

Caution!

To prevent accidents, do not operate the navigation system while driving.

Caution! Do not look at the display unless it is absolutely safe to do so!
Caution! Traffic regulations have priority over any instructions from the navigation sys-

tem.

Caution! Follow the instructions of the navigation system only when the circumstances

and the road traffic regulations allow you to do so! The navigation system guides you to
your destination even if you deviate from the calculated route.

Caution! Check that the cradle is secured and adjusted properly before each journey.

Note: If you have not understood the spoken instructions, or you're not sure about what

to do next, you can briefly refer to the map or arrow view of your navigation system.

6 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Getting Started

Important safety information

Safety information for the navigation device

Safety guidelines when installing in your car

Caution! Protect the device from moisture. The device is not waterproof and is not pro-

tected against water damage.

Caution! Do not run cables directly next to safety-relevant devices and supply lines.
Caution! After installation, check all safety-relevant equipment in the car.
Caution! Do not open the navigation device's casing under any circumstances.
Caution! Do not expose the navigation device to extreme heat or cold. This may dam-

age the device or impair its function.

Note: Ensure that there are no kinks in the cables and that they will not be damaged by

any sharp objects.

Note: To clean the navigation device, use a moist cloth only.
Note: Create a backup of the data contained on the memory card provided.
Note: The memory card must remain inserted in the device during operation of the nav-

igation system.

Note: Use SD memory cards only! Ensure that memory card contacts are clean and

undamaged.

Caution! When installing the SmartMirror, ensure that it does not represent a risk in the

event of an accident.

Caution! Do not run cables directly next to safety-relevant devices and power supplies.
Caution! After installation, check all safety-relevant equipment in the car.
Caution! The SmartMirror is to be connected to vehicles with an operating voltage of

12V only.

2009 ESCORT SmartMirror User’s Guide 7
Revision 1.0 ESCORT INC / NAVIGON INC

Getting Started

Preparing the SmartMirror for use

Preparing the SmartMirror for use

Use the device at your own risk.

Inserting a memory card

The SD memory card contains maps and navigation software. It also stores saved
destinations, routes, and logbook entries.

• Insert the memory card provided into the slot on the side of the device. Press the
card into the device until it locks into place.

Removing the memory card

1. Switch the navigation device off by pressing the (On/Off) switch for at least

6 seconds.

2. Press the memory card gently into the device until the lock disengages.

Caution!

Please be sure to see the safety information in “Important safety information”

on page 6.

8 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Basic Operations

Starting the SmartMirror

1. Press and hold the (On/Off) switch.

If password protection has been activated, the

ENTER PASSWORD WINDOW opens.

2. Enter the password.

3. Tap the

Continue button.

Each time the navigation device is turned on, the following message appears
when the software is started again:

4. After you have read and fully understood the text, tap

OK.

Note: If you do not accept these instructions, tap

Cancel to exit the navigation

software.

The

MAIN WINDOW displays.

The Main Window

The MAIN WINDOW opens when the navigation software starts.

You can reach all of the navigation software functions from this window.

2009 ESCORT SmartMirror User’s Guide 9
Revision 1.0 ESCORT INC / NAVIGON INC

Basic Operations

Starting the SmartMirror

New Destination

Tap this button to:

• Select an address by city or street. (See page 20.)

• Select a POI as a destination. (See page 22.)

• Select a POI by tapping on the map. (See page 31.)

My Destinations

Tap this button to select a destination from:

• A list of destinations you have saved. (See page 38.)

• A list of the most recently entered destinations. (See page 37.)

Take Me Home

Tap this button to:

• Specify your home address as a destination. (See page 36.)

• Quickly create a route back to your home address from your present location. (See
page 39.)

Show Map

Tap this button to:

• Show your location on the current map.

The Options Button

Tap this button to:

• Access R

OUTE PLANNING WINDOW to:

Create a route. (See page 41.)

Save a route. (See page 43.)

Load a saved route. (See page 43.)

• Access the S

ETTINGS WINDOW to set:

Basic Settings. (See page 55.)

Show information on the current map or change maps. (See page 57.)

POI settings. (See page 57.)

View or change route profile information. (See page 57.)

• Save the current location as a destination. (See page 36.)

Returning to the Main Window

To return to the Main Window from any other window:

• Tap (

Back) repeatedly, until the MAIN WINDOW redisplays.

10 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Basic Operations

Starting the SmartMirror

Initializing the GPS receiver

As soon as the navigation device has been switched on, initialization of the GPS
receiver begins.

In the upper right-hand corner of the display, the

GPS symbol appears. As soon as

data from at least 3 satellites is received, the symbol changes to GPS Ready.

Setting the volume

The volume of the spoken driving instructions can be adjusted during navigation.

With a map displayed:

1. Tap (

Volume).

The volume bar opens. It contains three buttons for adjusting the volume:

(

Louder), (Quieter), (Volume on/off).

2. Tap (

Volume) again.

The volume bar closes.

Stopping the SmartMirror

• Press and hold the (On/Off) switch for at least 2 seconds.

Note: It can take up to 20 minutes to initialize the integrated GPS receiver for the first
time.
Each time you turn on the device, GPS reception starts within one minute.
If the navigation device has been switched off for more than a week, the next initializa­tion can take up to 10 minutes.

Note: If the GPS

symbol displays GPS Ready after considerably less than 20 minutes,
it is advisable to leave the receiver switched on for at least an additional 15 minutes to
ensure reliable operation.

2009 ESCORT SmartMirror User’s Guide 11
Revision 1.0 ESCORT INC / NAVIGON INC

Basic Operations

Viewing device statuses

Viewing device statuses

Symbols located at the top of the screen are used to display information.

GPS

The GPS symbol can show the following GPS reception status:

No Symbol The built-in GPS receiver is not operational. Contact customer

service if the problem persists.

No Signal Data is being received from less than three satellites. Position

cannot be calculated.

GPS Ready Data is being received from at least three satellites. Position can

be calculated.

Direction

The Direction symbol shows the direction you are currently heading. It can show the
following points of the compass: N, NE, E, SE, S, SW, W and NW.

For more information, see “About GPS navigation” on page 4.

12 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Basic Operations

Using software keyboards

Using software keyboards

Software keyboards appear on the screen when text entries are necessary.

All entries can be made on the software keyboard using the fingertips. Only capital let­ters can be entered. When entering town or street names you need not enter any
special characters. The navigation system fills in these characters for you automati­cally. Three keyboards are available for entering destination information.

Alphabetic keyboard

Numeric keyboard

Special character/symbol keyboard

Tap to display the alphabetic
keyboard.
Only capital letters can be entered.

Tap to display the numeric
keyboard.

Tap to display the special
character keyboard.
As soon as you have entered a spe­cial character, the Alphabetic key­board reappears automatically.

2009 ESCORT SmartMirror User’s Guide 13
Revision 1.0 ESCORT INC / NAVIGON INC

Basic Operations

Using menus

Special keys

Using menus

Some buttons have menus which open when activated.

To select a function:

• Tap on a menu button to execute its function.

To close a menu without selecting a function:

• Tap on the button you used to open the menu.

On the Alphabetic and Numeric keyboards, enters a space character.

On the Alphabetic and Numeric keyboards, deletes the previous character and
moves the cursor back one space.

On the Alphabetic and Special Character keyboards, opens the Numeric key­board.

On the Numeric and Special Character keyboards, opens the Alphabetic key­board.

On the Alphabetic Numeric keyboards, opens the Special Character keyboard.

14 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Main Menu Button

2009 ESCORT SmartMirror User’s Guide 15
Revision 1.0 ESCORT INC / NAVIGON INC

This page intentionally left blank.

16 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Selecting Destinations

New destinations for the SmartMirror are destinations that you have not yet navigated to
or those that you have not yet stored.

You can enter an address, select a POI, or select a destination from the quick search func­tion.

Using auto-complete to select a destination

Lists often appear from which you can select an entry. This is the case, for example, when
you enter a location. After you type the first letter, the largest city in the selection area
appears. Once you type a second letter, the list shows all map areas that begin with the
typed letters.

If you enter additional letters, the list only contains entries that begin with your typed char­acters. The more characters you enter, the shorter the returned list becomes.

You can move though a list using (Up

) and (Down).

To accept an entry from the list:

• Tap on the entry.
The list closes once an entry is accepted.

Caution! Use the navigation system at your own risk.
Caution! Please be sure to refer to the safety information in “Important safety informa-

tion” on page 6.

2009 ESCORT SmartMirror User’s Guide 17
Revision 1.0 ESCORT INC / NAVIGON INC

Selecting Destinations

Selecting a search area

Selecting a search area

The Search Area button, used to select a map area, is located at the top of a location entry
window. Once an area is selected, a code on the button reflects the selection. For exam­ple, if the United States is selected, “USA” appears on the button. If the Canadian prov­ince of Alberta is selected, the code “AB” is shown.

When you enter a new destination for the first time, the

SEARCH AREA list opens. To select

an area that is different from the one currently shown, do the following:

1. Tap (Search Area).

The S

EARCH AREA list opens.

2. Tap on the area (country, state, or province) in which your destination lies.

The button displays the code for the selected destination area.

Note: Only areas that are represented in the currently loaded map can be selected.

18 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Selecting Destinations

Selecting Destinations

Selecting Destinations

Enter an Address

To find an address, you can specify a:

City first If you do not know the exact street address.

Street first If you do not know the actual city.

Search for POI

Points of Interest, (POIs) are useful addresses that are organized according to particular
criteria. POIs include airports, restaurants, hotels, gas stations, government offices,
banks, hospitals, shopping centers, etc. Icons representing the POIs can be displayed on
the map.

Nearby POIs nearby are special destinations that are located

within a given radius of your current location. This means
you can always find the nearest gas station, for example,
no matter where you are.

Nationwide POIs of nationwide significance are airports, places of

interest, national monuments, etc. This enables you to find
places of interest, for example, without having to know the
actual place where it is located.

In a City POIs in a given location can be useful when navigating in

an unfamiliar town.

Direct Access POI direct access system contains three categories of

special destinations. POIs in your vicinity that correspond
to these categories can be listed quickly, without the need
for additional entry.

By Tapping on the Map

You may indicate a destination directly on the map. In addition to towns and streets, you
may also select POIs.

2009 ESCORT SmartMirror User’s Guide 19
Revision 1.0 ESCORT INC / NAVIGON INC

Selecting Destinations

Entering an address

Entering an address

Specifying a city first

In the MAIN WINDOW:

1. Tap New Destination > Enter an Address.

2. Select (

City First).

The ADDRESS WINDOW opens.

3. Enter the name of the city or the postal code of the destination location.

4. Enter the name of the destination street.

5. Enter the house number. If you don't know the number of the house, leave this
field blank to display the

Intersection field.

6. If you don't know the house number, but know the name of a nearby side street,
tap in the

Intersection field and enter the name of this street. The navigation sys-

tem calculates a route to the intersection of the streets you have specified.

7. Tap the

Start Navigation button.

The map opens in

Preview mode.

Note:

You do not have to enter all the address details. If you only specify the:

• Town - a route is calculated to the town center.

• Town and street - a route is calculated to the center of the street.

For more information, see “Starting navigation” on page 33.

20 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Selecting Destinations

Entering an address

Specifying a street first

In the MAIN WINDOW:

1. Tap New Destination > Enter an Address.

2. Select (

Street First).

The A

DDRESS WINDOW opens.

3. Enter the name of the destination street.

4. Enter the house number. If you don't know the number of the house, leave the
field blank to display the

Intersection field.

5. If you don't know the house number, but know the name of a nearby side street,
tap on the

Intersection field and enter the name of this street. The navigation sys-

tem calculates a route to the intersection of the streets you have specified.

6. Tap the

Start Navigation button.

The map opens in

Preview mode.

Note:

You do not have to enter all the address details. If you only specify the:

• Town - a route is calculated to the town center.

• Town and street - a route is calculated to the center of the street.

Note: For more information, see “Starting navigation” on page 33.

2009 ESCORT SmartMirror User’s Guide 21
Revision 1.0 ESCORT INC / NAVIGON INC

Selecting Destinations

Selecting a Point of Interest (POI) destination

Selecting a Point of Interest (POI) destination

POIs nearby

In the MAIN WINDOW:

1. Tap New Destination > Search for POI.

2. Tap Nearby.

3. Specify a category from which you would like to select a POI.

4. If a sub-category exists, specify a sub-category.
The

Name of the Destination list opens. It contains the nearest POIs in the speci-

fied category, sorted by distance.

5. Tap on the name of the destination.

Note: GPS reception must be sufficient for determining position. You can see if GPS

reception is sufficient by looking at the (GPS Ready) symbol. For more information,

see “GPS ” on page 12.

22 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Selecting Destinations

Selecting a Point of Interest (POI) destination

6. Tap the Start Navigation button.

The map opens in Preview mode.

For more information, see “Starting navigation” on page 33.

2009 ESCORT SmartMirror User’s Guide 23
Revision 1.0 ESCORT INC / NAVIGON INC

Selecting Destinations

Selecting a Point of Interest (POI) destination

National POIs

In the MAIN WINDOW:

1. Tap New Destination > Search for POI.

2. Tap Nationwide.

The POI OF NATIONAL SIGNIFICANCE WINDOW opens.

3. Specify a category from which you would like to select a POI.

The

Name of the Destination list opens. It contains a list of national POIs, sorted by

distance.

4. Tap on the name of the destination.

5. Tap the

Start Navigation button.

Enter the first characters from the beginning of the POI name to shorten the returned list
of POIs.

24 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Selecting Destinations

Selecting a Point of Interest (POI) destination

The map opens in Preview mode.

For more information, see “Starting navigation” on page 33.

2009 ESCORT SmartMirror User’s Guide 25
Revision 1.0 ESCORT INC / NAVIGON INC

Selecting Destinations

Selecting a Point of Interest (POI) destination

POIs in a specified city

On the MAIN WINDOW:

1. Tap New Destination > Search for POI.

2. Tap in a City.

3. Enter the name or the postal code of the destination location.

4. Specify a category from which you would like to select a POI.

5. If sub-categories exist for the category, specify a sub-category.
The

Name of the Destination list opens. It contains POIs from the specified cate-

gory, sorted alphabetically.

6. Tap on the name of the destination.

7. Tap the

Start Navigation button.

Enter the first characters from the beginning of the POI name to shorten the returned list
of POIs.

26 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Selecting Destinations

Selecting a Point of Interest (POI) destination

The map opens in Preview mode.

For more information, see “Starting navigation” on page 33.

2009 ESCORT SmartMirror User’s Guide 27
Revision 1.0 ESCORT INC / NAVIGON INC

Selecting Destinations

Selecting a Point of Interest (POI) destination

POI direct access

In the MAIN WINDOW:

1. Tap the New Destination button.

The N

EW DESTINATION MENU opens.

The symbols of the categories which have been selected for direct access can be
seen in the menu at the bottom.

2. Tap on a category from which you would like to select a POI.

The

Name of the Destination list opens. It contains the nearest POIs in the speci-

fied category, sorted by distance.

3. Tap on the name of the destination.

Note: GPS reception must be sufficient for determining position. You can determine

whether GPS reception is sufficient by looking at the (GPS Ready) symbol. For more
information, see “GPS ” on page 12.

28 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Selecting Destinations

Selecting a Point of Interest (POI) destination

The map opens in Preview mode.

Specify direct access POI categories

In the MAIN WINDOW:

1. Tap Options > Settings

2. Tap POI.

3. In the Direct Access 1 field, tap (List) and select a POI category.

4. Repeat the above step in the

Direct Access 2 and Direct Access 3 fields.

5. When finished, tap

Done to save the changes.

For more information, see “Starting navigation” on page 33.

2009 ESCORT SmartMirror User’s Guide 29
Revision 1.0 ESCORT INC / NAVIGON INC

Selecting Destinations

Selecting a Point of Interest (POI) destination

Information about the POI

For many destinations that you specify, there will be additional information available,
stored in the navigation system's database.

For example, for many restaurants there is a telephone number available. You can call the
restaurant in order to reserve a table, for example.

On the

DESTINATION SELECTION WINDOW, the following buttons are available:

Destination Info

Opens the DESTINATION INFO WINDOW. It contains
basic information about the POI including address
and phone number.

Show on Map

Show the POI on a map relative to your current
location.

30 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Selecting Destinations

Selecting a destination by tapping the map

Selecting a destination by tapping the map

On the MAIN WINDOW:

1. Tap the Show on Map button.

2. Tap (

Destination search).

The map opens in

Destination search mode.

3. Tap on the point to which you wish to navigate.
The destination that you have selected appears under the cross hairs.

4. Tap (

OK).

The D

ESTINATION ON MAP WINDOW opens. Detailed address information for the

selected destination displays in the upper left-hand corner.

5. Tap the

Take Me There button.

2009 ESCORT SmartMirror User’s Guide 31
Revision 1.0 ESCORT INC / NAVIGON INC

Selecting Destinations

Selecting a destination by tapping the map

The map opens in Preview mode.

For more information, see “Starting navigation” on page 33.

32 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Selecting Destinations

Starting navigation

Starting navigation

With the map open in Preview mode, the destination is shown as a small flag. The
route and the estimated trip time are displayed.

With the map open in Preview mode:

• Tap the

Start Navigation button or simply start driving.

Quitting navigation

• Tap (Back) to quit navigation.

A window prompts you to confirm.

No GPS reception

When GPS signal is interrupted, the following message appears:

"GPS reception is currently not sufficient. Naviga­tion starts automatically as soon as GPS reception
is OK again."

You have the following options:

• Wait until GPS reception is sufficient for determining position, the route is recalcu-

lated and you can begin navigation.

• Tap the

Cancel button. The MAIN WINDOW opens. Your destination is saved in the

LAST DESTINATIONS list.

• Tap the

Demo button. The route is calculated using the center of the specified loca-

tion as starting point. The simulation of the calculated route begins.

• Tap (

Back) to end the demonstration.

Arriving at your destination

A message displays when you have reached your destination.

Your current position (indicated by an orange triangle) is shown on the map.

2009 ESCORT SmartMirror User’s Guide 33
Revision 1.0 ESCORT INC / NAVIGON INC

This page intentionally left blank.

34 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

My Destinations

Every destination that you enter and the destinations from the LAST DESTINATIONS list can
be saved to the

FAVORITES list. This is useful if you often navigate to a particular desti-

nation.

Saving a destination

1. Enter a destination. (See “Selecting Destinations” on page 17.

Do not tap the

Start Navigation button!

2. Tap

Options > Save Destination.

- OR –

1. Select a destination from the

LAST DESTINATIONS LIST. (See page 37.)

Do not tap the

Start Navigation button!

2. Tap

Options > Save as Favorite.

3. Enter a name for the destination.

4. If you want to define the destination as your home address, tap (Toggle) so
that the value

Yes is highlighted in black.

5. Tap the

Save button.

2009 ESCORT SmartMirror User’s Guide 35
Revision 1.0 ESCORT INC / NAVIGON INC

My Destinations

Saving a destination

Saving the current location using GPS

The GPS STATUS WINDOW provides you with an overview of the data the navigation sys­tem calculates from the received GPS signals.

GPS status is available via the options of several windows.

In the

GPS STATUS WINDOW:

1. Tap

Options > GPS status.

The current location can be stored in the FAVORITES list.

2. Tap the Save Position button.

The SAVE DESTINATION AS... WINDOW opens. The cursor blinks in the Name field.

3. Enter a name for the destination.

4. Specify whether your current position should be stored as the home address.

5. Tap the Save button.

Saving your home address as a destination

Only one destination from the FAVORITES list can be defined as your home address.

You can begin navigation to this destination quickly by tapping the

Take Me Home but-

ton in the

MAIN WINDOW.

1. Select the destination which you want to define as your home address from the

FAVORITES list. (See page 38.)

2. Tap

Options > Home Address.

The selected destination is saved as your home address. On the FAVORITES list, a
house icon is shown next to your home address.

36 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

My Destinations

Selecting a saved destination

Selecting a saved destination

The following lists of destinations and addresses are available for selection under My

Destinations.

LAST DESTINATIONS Destinations you have previously navigated to.

FAVORITES Destinations you have stored.

Selecting a destination from the Last Destinations list

Saves the last 30 destinations to which you have navigated in the LAST DESTINATIONS
list.

In the

MAIN WINDOW:

1. Tap

My Destinations > Last Destinations.

2. Tap the destination to which you would like to navigate.

3. Tap the

Start Navigation button.

The map opens in Preview mode.

For more information, see “Starting navigation” on page 33.

2009 ESCORT SmartMirror User’s Guide 37
Revision 1.0 ESCORT INC / NAVIGON INC

My Destinations

Selecting a saved destination

Selecting a destination from the Favorites list

Destinations to which you often travel can be saved in the FAVORITES list.

In the

FAVORITES list, up to 300 destinations can be saved.

In the

MAIN WINDOW:

1. Tap

My Destinations > Favorites.

2. Tap the destination to which you would like to navigate.

3. Tap the

Start Navigation button.

The map opens in Preview mode.

Information on how to store a destination can be found in “Saving a destination” on
page 35.

For more information, see “Starting navigation” on page 33.

38 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

My Destinations

Navigating homewards

Navigating homewards

With the SmartMirror you can save an address as a home address. You can navigate
to your home address at anytime by activating a single button.

The first time you tap the

Take Me Home button, you are asked to enter your address.

In the

MAIN WINDOW:

• Tap the

Take Me Home button.

If you have not yet entered your home address, a window displays.

Navigation, using the current route profile information to calculate the route, begins.

For more information, see “Saving your home address as a destination” on page 36.

For more information, “Viewing the Route Profile” on page 44.

2009 ESCORT SmartMirror User’s Guide 39
Revision 1.0 ESCORT INC / NAVIGON INC

This page intentionally left blank.

40 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Working With Routes

With the SmartMirror, you can preplan routes. Planned routes can be saved for later use,
allowing you to create as many routes as you like.

Accessing the Route Planning Window

In the MAIN WINDOW:

1. Tap the Options button.
The options list opens.

2. Tap the

Route Planning option.

The

ROUTE PLANNING WINDOW opens.

Entering the starting point

The starting point of a route, is the point at which you want to begin your trip. This does not
need to be the current location. If you are at home planning a route for your vacation, you
could, for example, enter your hotel as the starting point.

The starting point is only important if you want to see a planned route on the map, but cur­rently have no GPS reception, or you are not currently at the planned starting point. The
starting point that you enter therefore has the flow number "0".

As soon as you begin navigation, your current location is used as the starting point for the
route calculation.

The first stage is the trip to the route point with the flow number "1".

On the R

OUTE PLANNING WINDOW:

1. Tap the Specify Starting Point button.
The

STARTING POINT menu opens.

2. Select:

•

Enter an Address to search for a location address.

•

Search for a POI to search for a POI.

•

My Destinations to select a location from the FAVORITES or LAST DESTINATIONS

lists.

•

My Address to select your home address. (Only available if you have already

specified a home address.)

•

Current Position to specify your current position as the starting point.

2009 ESCORT SmartMirror User’s Guide 41
Revision 1.0 ESCORT INC / NAVIGON INC

Working With Routes

3. Enter the starting point. (See the corresponding section of “Selecting Destina­tions” on page 17.)

4. Tap the

Set Starting Point button.

The selected destination appears next to the 0

, indicating that it is the Starting

Point of the route.

Changing the starting point

On the ROUTE PLANNING WINDOW:

1. Tap the Specify Starting Point button.
The

STARTING POINT menu opens.

2. Select a different starting point by following the above steps.

Entering route points

Route points are destinations on the route that you want to navigate to.

The flow number for each route point can be found on a button in front of it.

1. Tap the Add Route Point field.
The R

OUTE POINT menu opens.

2. Tap on the button for the desired destination entry type.

3. Enter the route point. (See the corresponding section of “Selecting Destinations”
on page 19.)

4. Tap the

Add button.

The selected route point is shown next to its flow number.

5. Repeat these steps for each additional destination that you want to add to your
route.

Changing the order of route points

Route points can be deleted from a route. The order of the route points can be varied as
you wish.

On the R

OUTE PLANNING WINDOW:

• Tap on the route point that you want to edit.
The context menu contains the following buttons:

Route Point Up: Moves the selected route stage forwards. (Example:

route point 2 becomes route point 1).

Route Point Down: Moves the selected route point backwards.

(Example: route point 2 becomes route point 3).

Delete: Deletes the selected route point. A window prompts you to

confirm deletion.

Note: The starting point (flow number "0") can not be moved nor deleted.

42 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Working With Routes

Managing routes

Managing routes

You can save each planned route under a particular name.

You can load, rename or delete stored routes.

Saving routes

You can save a route after you have entered the starting point and at least one route point.

On the R

OUTE PLANNING WINDOW:

1. Tap Options > Save Route.

2. Enter a name for the route.

3. Tap the

Save button.

The route is saved to the

SAVED ROUTES list.

Loading routes

On the ROUTE PLANNING WINDOW:

1. Tap Options > Saved Routes.

2. Tap the route you want to load.

3. Tap the

Load Route button.

The

ROUTE PLANNING WINDOW displays the starting point and the route points of the

selected route.

Note: Only the start point and route points are saved. The calculated route is not. If you
load a route that has been saved, it must be recalculated before navigation can begin.

2009 ESCORT SmartMirror User’s Guide 43
Revision 1.0 ESCORT INC / NAVIGON INC

Working With Routes

Navigation

Navigation

After the route is calculated, you can begin navigation or view a simulation of the route.

Calculating and displaying routes

With the SmartMirror, you can preplan routes. Planned routes can be saved for later use,
allowing you to create as many routes as you like.

On the R

OUTE PLANNING WINDOW:

1. Load a saved route.

- OR -

2. Enter a starting point and at least one route point.

3. Tap the

Show Route button.

The map opens in Preview mode.

The starting point and the route points are marked by flags. For each stage, the
distance and the estimated trip time is given. This information is also displayed for
the entire route.

4. Tap the

Start Navigation button or simply start driving.

Viewing the Route Profile

The calculation of a route is based on route options. Create a route or load a previously
saved route.

On the R

OUTE PLANNING WINDOW:

1. Tap the Show Route button.
The map opens in Preview mode and displays the calculated route.

2. Tap

Options > Route Profile.

You can view and, if necessary, change any of the displayed options.

Note: Once options are changed, they remain in effect for all subsequent navigation.
You can get information regarding changing individual route profiles by tapping the cor-

responding (Help

) button.

44 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Working With Routes

Simulating routes

Simulating routes

You can also view a simulation of a calculated route.

Starting a route simulation

You have calculated and displayed a route.

With the route displayed in Map Preview mode:

• Tap Options > Simulation.
The route is recalculated for simulation purposes. Simulation starts when calcula-

tion has finished.

Ending simulation

You can end simulation at any time.

While viewing the route simulation:

• Tap (Back).

A window prompts you to confirm your decision to cancel navigation.

The

ROUTE PLANNING WINDOW redisplays.

Note: GPS signal reception is not required for simulation.
Simulations are restricted to routes of a maximum of 60 miles.

2009 ESCORT SmartMirror User’s Guide 45
Revision 1.0 ESCORT INC / NAVIGON INC

Working With Routes

Viewing a Turn-by-Turn List

Viewing a Turn-by-Turn List

You can display detailed directions of the calculated route before starting navigation or at
any time during navigation. This list displays all of the driving instructions in table form.

With the route displayed in Preview, Navigation, or Reality View mode:

• Tap the Show Turn-by-Turn List button.
The

TURN-BY-TURN LIST WINDOW opens.

1. Schematic depiction of the next junction where you must turn.

2. Distance to this junction.

3. Name of the street onto which you must turn.

4. Indicates whether you want to travel on the section of the route.

(

Allow) Include this section in the route.

(

Forbid) Exclude this section from the route.

Blocking route sections

On the TURN-BY-TURN LIST WINDOW:

1. Tap on the route section you do not want to travel on, so that the (Forbid) sym­bol appears next to them.

2. Tap (

Modify Route).

The navigation system calculates an alternative route avoiding the route sections
selected. The new driving instructions are displayed in the

TURN-BY-TURN LIST WIN-

DOW.

3. Tap (

Back) to close the TURN-BY-TURN LIST WINDOW.

Removing blocks and using original routes

Section blocks can be removed at anytime.

On the T

URN-BY-TURN LIST WINDOW:

• Tap Options > Calculate original route.

46 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Working With Maps

Your SmartMirror comes with maps of the 48 contiguous United States, Alaska,
Hawaii, Puerto Rico and the Virgin Islands, and all 13 Canadian provinces/territories.

2009 ESCORT SmartMirror User’s Guide 47
Revision 1.0 ESCORT INC / NAVIGON INC

Working With Maps

View information on the current map

View information on the current map

On the MAIN WINDOW:

• Tap

Options > Settings > Current Map.

The

CURRENT MAP WINDOW opens.

Selecting a different map

On the MAIN WINDOW:

1. Tap

Options > Settings > Current Map.

The

CURRENT MAP WINDOW opens.

2. Tap (

List) and select a different map.

View Information About the Map Currently in Use

You can see information about the map currently in use or select another map.

On the

MAIN WINDOW:

• Tap

Options > Settings > Current Map.

48 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Working With Maps

Map in Preview mode

Map in Preview mode

You have entered a destination and tapped the Start Navigation button.

- OR –

You have planned or loaded a route and tapped the

Show Route button.

The map opens in

Preview mode. The entire route is visible.

1. The route is highlighted in orange.

2. A triangle in orange shows your current position.
If you display a planned or loaded route and the specified starting point is not the

same as your current location, the current position may or may not be shown on
the preview.

3. The destination is marked with a small flag.
When you have planned or loaded a route and displayed it, the starting point and

each route point is marked with a small flag.

4. The total distance for the route is shown in a small information box, together with
the estimated trip time and the estimated time of arrival.

This information can be displayed or hidden by tapping on

Options > Settings >

Basic Settings.

If you display a route with several stages, information for each stage is shown.

5. Tap:

• The

Show Turn-by-Turn button to view detailed directions for the route. (See

“Viewing a Turn-by-Turn List” on page 46.)

• The

Start Navigation button to begin the journey.

When you display a planned or loaded route, the route may be recalculated.
Starting point for the calculation is your current location. Once the route is cal­culated, you are guided to the first route point.

•

Options > Route Profile to view or change the settings used to calculate the

route.

• (

Destination search) to view the map in Destination search mode.

2009 ESCORT SmartMirror User’s Guide 49
Revision 1.0 ESCORT INC / NAVIGON INC

Working With Maps

Map in Navigation mode

Map in Navigation mode

After the route has been viewed in Preview mode, navigation starts.

Navigation is shown in

Navigation mode.

1. Signposting to be followed is displayed here.

2. Posted speed limits are displayed here (where available).

3. The route is marked in orange.

4. When two maneuvers need to be executed in quick succession, the small arrow
field indicates the second maneuver to be executed.

5. The large arrow field shows a schematic depiction of the next maneuver. The

remaining distance to the junction is displayed below the arrow.
As you get closer to the junction, the spot diagram, rather than the distance, is

shown.

The nearer you get to the junction, the more yellow spots are displayed.

If you don't have to change direction for a longer period, you see only a forward­facing arrow. The distance you travel on the road you are on displays beneath the
arrow.

• Tap the large arrow field to hear current route instructions.

6. The traffic lanes to be followed to your destination are shown in orange.

7. Your current speed and the height above sea level are displayed here.

8. The remaining distance to the destination, the estimated duration of the trip, and
the estimated time of arrival are shown.

9. A triangle in orange shows your current position on the map. The map area dis­played continually changes so that your current position is always centered on the
map.

50 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Working With Maps

Map in Navigation mode

10. If you are navigating a route with several stages, you see the remaining distance,
estimated duration of the trip, and the estimated time of arrival for the next interim
destination in the

Next field.

11. The name of the next stretch of road that you must travel on is displayed in the
upper street field.

12. The name of the street you are currently traveling on is displayed in the lower
street field.

• Tap

Options > Show Turn-by-Turn List to view detailed directions for the route. (See

“Viewing a Turn-by-Turn List” on page 46.)

• Tap (

Destination search) to view the map in Destination search mode. (See

“Map in Destination search mode” on page 52.)

• Tap (

Back) to quit navigation

Map functions in Navigation mode

When the map is open in Navigation mode, tap any point on the map. Buttons with
various functions are displayed.

2D/3D

: Changes between 2D and 3D mode. The symbol for the mode

that is currently set is marked orange.

Day/Night

Changes between "day" and "night" display modes. The symbol
for the mode that is currently set is marked orange.

Interim Destination

Opens a menu for entering an interim destination. The navigation
system first guides you to this interim destination. Afterwards,
you can simply continue navigation to your original destination.

Skip Route Point

Tap this button to omit the next route point. This button is inactive
when less than 2 route points are pending.

Block

Tap this button in order to block a section of the route that lies in
front of you, i.e. to recalculate the route in order to avoid this sec­tion of the route, e.g. if you have heard of a traffic jam relating to
this section on the radio.
Tap this button again to remove the block.

POI on Your Route

Tap this button to display POIs on your route. This enables you to
find out, for example, how far it is to the nearest services. A des­tination shown here can be added as an interim destination by

tapping the (

Interim Destination) button to the right of its entry

in the list.

Note: The displays for many of the above mentioned fields can be configured via
Options

> Settings > Basic Settings. Some displays only function if the corresponding
information is available on the map.
Note: If you tap on the large arrow field, the current route instruction is repeated.

2009 ESCORT SmartMirror User’s Guide 51
Revision 1.0 ESCORT INC / NAVIGON INC

Working With Maps

Map in Destination search mode

Map in Destination search mode

The map is always in Destination search mode when a pair of cross hairs can be
seen.

When you are driving, the map's orientation does not change. It is always oriented
with north at the top.

Zoom Out The map section shown becomes larger, but fewer details

are shown.

Zoom In The map section becomes smaller, but more details are

shown.

Zoom Mode When this button is active, you can plot a map section with

your finger.

Plot the map section from upper left to bottom right and it
zooms to fit the size of the screen.

Plot the map section from bottom right to top left, and the
map zooms out.

Pan Mode When this button is active, you can move the map section

with your finger. Tap on the map and drag it in the desired
direction.

Entire Route Zooms the map so that the entire route is visible.

Current Position Selects the map section shown so that the current location

is centered.

52 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Working With Maps

Map in Destination search mode

Operating in Destination search mode

1. Tap on the point to which you wish to navigate.
The destination that you have selected appears under the cross hairs.

2. Tap (OK).
Buttons with various functions appear.

Take Me There Begins navigation to the selected point. If you are currently

navigating, navigation stops.

Interim Destination Sets the selected point as an interim destination. The navi-

gation system first guides you to this interim destination.
Afterwards, you can continue navigation to your original
destination.

This function is only active during navigation.

Set as Destination Adds the selected point as the last point in the route plan. If

no route plan was open, the selected point becomes the first
point in a new route plan.

Save Opens the SAVE DESTINATION AS... WINDOW. You can enter a

name for the selected point to be stored in the

FAVORITES

list.

Search Nearby Opens the POI NEARBY WINDOW. Here you can search for

destinations near the specified point. (See “POIs nearby” on
page 22.).

• Tap (

Destination search) to quit the Destination search mode. You are

returned to the window from which you started this mode.

• Tap (Back) to return to the MAIN WINDOW. If you are currently navigating, you

are prompted to confirm your decision to quit navigation.

For more information, see “Starting navigation” on page 33.

2009 ESCORT SmartMirror User’s Guide 53
Revision 1.0 ESCORT INC / NAVIGON INC

Working With Maps

Reality View (Junction View)

Reality View (Junction View)

When, during navigation, you approach a highway junction, the map changes to Real-

ity View

mode.

The

Reality View mode shows the signposting and lanes you must follow. This mode

displays until you pass the highway junction. Once past the junction, the map returns
to

Navigation mode.

While traveling through the highway junction:

• To change from Reality View back to Navigation mode, tap anywhere on the
map.

• To change from Navigation Mode back to Reality View, tap the

Next Maneuver

button.

When the screen orientation is set to portrait, Reality View map mode is not available.

Note: Reality View mode is not available for every highway junction. Availability is

dependent on the map data currently in use.

54 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Customizing Your SmartMirror

Accessing the Settings window

The settings can be reached via the options of several windows.

• Tap

Options > Settings.

The Settings window

The SETTINGS WINDOW is where you can customize your SmartMirror’s navigation set­tings to suit your personal needs and preferences.

The

SETTINGS WINDOW has several buttons.

• Tap a button to open the corresponding settings window.

Basic Settings

These settings include:

Language Select the language to display on the screen.

Options are English, Spanish, or French.

Speak Street Names Indicate whether street names are spoken during

navigation.

Reality View Indicate whether Reality View displays a visual

representation of an approaching junction. High-
way signs and the lane to be used are indicated.
(This feature is dependent on the selected map
and may not be available in all areas.)

2D Zoom Factor Indicate how auto-zoom behaves by default when

a 2D view mode is selected. The zoom changes,
based on speed. When driving slower, the map
scale gets smaller. When driving faster, the map
scale gets larger. Options are no automatic zoom,
smaller or larger map sections, or standard.

2009 ESCORT SmartMirror User’s Guide 55
Revision 1.0 ESCORT INC / NAVIGON INC

Customizing Your SmartMirror

The Settings window

3D Map:Show Street Names Indicate whether to show street names on maps

displayed in 3D view mode.

2D Map:Show Street Names Indicate whether to show street names on maps

displayed in 2D view mode.

2D Map Orientation Indicate the orientation of maps shown in 2D map

view mode. Options are direction of travel, or
whether to show 2D map view orientation in the
direction of travel (the direction you are driving is
always at the top of the map), or Always North
(magnetic North is always at the top of the map).

Orientation Indicate the orientation of the display. Options are

Portrait or Landscape.
Note: Reality View map mode is not available
when the screen orientation is set to Portrait.

Show Altitude and Speed Show or hide the altitude and current speed on a

displayed map.

Display Compass Show or hide a small compass on screen during

navigation.

Show Remaining Distance Show or hide the distance remaining to the desti-

nation or an interim destination, if applicable.

Show Duration of Journey Show or hide the travel time remaining to the desti-

nation or an interim destination, if applicable.

Show Time of Arrival Show or hide the time of arrival at the destination

or an interim destination, if applicable.

Info When Crossing Borders Show or hide local speed restrictions when cross-

ing a country border.

Show Speed Limits Select whether to show highway speed limits.

Options are always, only when exceeding the
speed limit, or never.

Warnings Within Urban Areas Indicate whether a warning displays when exceed-

ing the speed limit in densely populated areas.
Options are to never warn, or to display a warning
when 5, 10, 15 or 20 mph over the stated speed
limit.

Warnings Outside of Urban Areas Indicate whether a warning displays when exceed-

ing the speed limit in less densely populated or
rural areas. Options are to never warn, or to dis­play a warning when 5, 10, 15 or 20 mph over the
posted speed limit.

Warn Against Conditional Speed Limits

Show or hide speed limit restrictions in force dur­ing special situations, such as rain, snow, time of
day restrictions, etc.

Menu Animation Indicate whether the opening of menus is ani-

mated.

Distance Unit Indicate the distance unit to be used, either Miles

56 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Customizing Your SmartMirror

The Settings window

or Kilometers.

Time Format Indicate how times are displayed, either a 12 hour

format (with am and pm), or a 24 hour format.

Coordinates Display Show or hide coordinates.

Coordinate Format If coordinates are shown, indicate whether they

display in decimal format or in minutes and sec­onds format.

Brightness Day Indicate the display brightness for use during the

daytime. Options are from 1 (less bright) to 8 (most
bright).

Brightness Night Indicate the display brightness for use at night.

Options are from 1 (less bright) to 8 (most bright).

Speed-Dependent Volume Indicate whether you want the volume level to

increase when your speed increases. Options are
never, yes with a low amplification, or yes with a
high amplification.

Current Map Settings

These settings include:

Current Map Displays information on the currently displayed

map. If additional maps are available, you can
select a different map. Options are: Alaska,
Hawaii, Puerto Rico, or USA and Canada.

POI Settings

These settings include:

Categories Shown Specify the number of POI categories that are

shown on the displayed map.

Direct Access 1 Select the first POI category to display for use with

the POI direct access and POI nearby functions.

Direct Access 2 Select a second POI category to display for use

with the POI direct access and POI nearby func­tions.

Direct Access 3 Select a third POI category to display for use with

the POI direct access and POI nearby functions.

Route Profile Settings

These settings include:

Speed Profile Select the type of transport, such as, fast or slow

car, truck, motorcycle, bicycle, or pedestrian. This
is used for calculating routes and arrival times.

Type of Route Select the type of route to be calculated: Fast,

Optimum, Short, or Scenic.

Highways Select whether highways are included in a calcu-

2009 ESCORT SmartMirror User’s Guide 57
Revision 1.0 ESCORT INC / NAVIGON INC

Customizing Your SmartMirror

The Settings window

lated route.

Toll Roads Select whether toll roads are included in a calcu-

lated route.

Ferries Select whether ferries are included in a calculated

route.

Calculate the Next Stage For routes with multiple stages. After reaching a

route point, select whether the next stage is calcu­lated automatically.

U-turn allowed Select whether u-turns are considered when calcu-

lating a route.

Options Button

Customizing Your SmartMirror

The Settings window

lated route.

Toll Roads Select whether toll roads are included in a calcu-

lated route.

Ferries Select whether ferries are included in a calculated

route.

Calculate the Next Stage For routes with multiple stages. After reaching a

route point, select whether the next stage is calcu-
lated automatically.

U-turn allowed Select whether u-turns are considered when calcu-

lating a route.

Options Button

Password Lock Select this option to add, change, or remove a

device password.

Production Information Select this option to view NAVIGON 5100 software

and hardware versions, as well as, information on
the maps, traffic and Zagat POIs.

Touchscreen Calibration Select this option to recalibrate the touchscreen.

Factory Settings Select this option to reset the device to default val-

ues. Destinations and routes saved on the mem­ory card are not affected.

58 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

Customizing Your SmartMirror

Selecting options

Selecting options

Moving between pages

The settings of the individual windows are distributed on several windows.

• Move between windows by tapping (

To the Left) and (To the Right).

Viewing a list of options for a setting

Some settings have several values. A value can be selected from a list. The value that
is currently valid is shown.

1. Tap (

List).

A list with all potential values opens. The value that is currently valid is marked.

2. Tap the desired value. It is now marked.

3. Tap the

OK button.

The list closes. The new value is displayed.

Toggling between options

Some settings can only accept two or three different values. All values are displayed
with the currently selected value shown in black.

• Tap (

Toggle) to alternate between values.

2009 ESCORT SmartMirror User’s Guide 59
Revision 1.0 ESCORT INC / NAVIGON INC

Customizing Your SmartMirror

Selecting options

• Tap (Toggle) to alternate between the potential values.

Viewing information about a setting

For each setting there is a (Help) button. When you tap it, you see a precise
explanation of the corresponding setting.

Saving changes

• Tap the Done button.
Any changes you have made are saved.

The

SETTINGS WINDOW opens again.

Discarding changes

• Tap the Cancel button.
Any changes you have made are discarded.

The SETTINGS WINDOW opens again.

Technical Data

Specifications

Compliance Notices

The SmartMirror complies with Part 15 of the FCC interference limits for Class B digi­tal devices for home or office use.

“Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.”

CPU SamsungS3C2440AͲ400MHZ
RAM 64MB
Memorycard 2GB
LCD 4Ͳinch/480x272pixel
TouchScreen FourͲlineresistivetouch
Speakers Internal8ɏ/1W
GPS SamsungSirfͲIII
Bluetooth Version1.2
PowerSupply 12VDC
PowerConsumption <10W
CurrentDraw <500mA
VideoFormat PAL/NTSC
VideoInput 1VpͲp@75Impedance
OperatingTemperature 0°CͲ60°C

60 ESCORT SmartMirror User’s Guide 2009
ESCORT INC / NAVIGON INC Revision 1.0

ESCORT One Year Limited Warranty

What this warranty covers: ESCORT warrants your Product against all defects in materials and

workmanship.
For how long: One (1) year from the date of the original purchase.
What we will do: ESCORT, at our discretion, will either repair or replace your Product free of
charge.
What we will not do: ESCORT will not pay shipping charges that you incur for sending your
product to us.
What you must do to maintain this warranty: Show original proof of purchase from an autho­rized ESCORT dealer.
Warranty Exclusions: Warranty does not apply to your product under any of the following con-

ditions: 1. The serial number has been removed or modied. 2. Your product has been subjected

to misuse or damage (including water damage, physical abuse, and/or improper installation). 3.

Your product has been modied in any way. 4. Your receipt or proof-of-purchase is from a non-

authorized dealer or internet auction site including E-bay, U-bid, or other non-authorized resell­ers. 5. You are not the original purchaser of the radar detector from an authorized dealer or did
not receive it as a gift from the original purchaser of the radar detector from an authorized dealer.
To obtain service: 1. Contact ESCORT (1.800.543.1608) to obtain a Return Authorization
Number. 2. Properly pack your product and include: your name, complete return address, writ­ten description of the problem with your product, daytime telephone number, and a copy of the
original purchase receipt. 3. Label the outside of the package clearly with your Return Authoriza­tion number. Ship the product pre-paid (insured, for your protection) to: ESCORT Inc, 5440 West
Chester Rd., West Chester, OH 45069.
LIMITATION OF WARRANTY: EXCEPT AS EXPRESSLY PROVIDED HEREIN, YOU
ARE ACQUIRING THE PRODUCT “AS IS” AND “WHERE IS,” WITHOUT REPRESENTATION
OR WARRANTY. ESCORT SPECIFICALLY DISCLAIMS ANY REPRESENTATION OR WAR­RANTY INCLUDING, BUT NOT LIMITED TO THOSE CONCERNING THE MERCHANTABILITY
AND SUITABILITY OF THE PRODUCT FOR A PARTICULAR PURPOSE. ESCORT SHALL
NOT BE LIABLE FOR CONSEQUENTIAL, SPECIAL OR INCIDENTAL DAMAGES INCLUDING,
WITHOUT LIMITATION, DAMAGES ARISING OUT OF THE USE, MISUSE OR MOUNTING OF
THE PRODUCT. The above limitations or exclusions shall be limited to the extent they violate
the laws of any particular state. ESCORT is not responsible for products lost in shipment be­tween the owner and our service center.

Other legal rights: This Warranty gives you specic rights. You may have other legal rights,

which vary, from state to state.

2009 ESCORT SmartMirror User’s Guide 61
Revision 1.0 ESCORT INC / NAVIGON INC

ESCORT INC
5440 West Chester Rd.
West Chester, OH 45069

Sales: 800.433.3487
Service: 800.543.1608
EscortRadar.com