Escort S75G User Manual

S75G QRG artwork: AW-1220057-1C Rev C
S75G QRG artwork: AW-1220057-1C Rev C
How To Use Preferences
PASSPORT is ready to go, just plug it in and turn it on, but you can also easily change features for your preferences. There are 10 user-selectable Preferences so you can customize your S75G for your specific driving needs.
The buttons labeled “MRK” and “BRT” are used to enter Preferences, REVIEW your current settings, and to CHANGE any settings as desired. The word PREF is located on the top of the detector, and is highlighted in colored graphics.
How to use Preferences
1
To enter Preferences, press and hold
the “MRK” and “BRT” buttons down for 2 seconds. The unit will beep twice, and will
display the word
2
Then press the “BRT” button to review the
current settings. You can either tap the button
to change from item to item, or hold the button to scroll through the items.
3
Press the + or - button to change any setting.
You can either tap the button to change from setting to setting, or hold the button to scroll through all the options.
4
To exit Preferences, simply wait 8 seconds
without pressing any button, or press the power button
Complete, beep 4 times, and return to normal
operation.
Prefs.
. The unit will display
An example
Here is how you would turn PASSPORT’s AutoMute feature o.
1
Enter Preferences by holding both the MRK and
BRT buttons down for 2 seconds. PASSPORT will
beep twice and display
2
Then hold the “BRT” button down. PASSPORT will
Prefs.
scroll through the categories, starting with Pilot Light (
Pilot), then SpeedAlert (sAlrt), Powe r-on
sequence (
(
Meter), and then AutoMute (aMute).
3
Release the “BRT” button when PASSPORT
PwrOn), then Signal strength meter
shows the AutoMute item. Since the factory setting is for AutoMute to be on, PASSPORT will display
aMute ON.
If you accidentally don’t release the “BRT” button in time, and PASSPORT goes to the next category, simply hold the “BRT” button down again, and after PASSPORT scrolls through all categories, it will begin again at the top of the list.
4
Press the + or – button to change from
aMute ON to aMute OFF.
5
To complete choosing your Preferences, simply
wait 8 seconds without pressing any buttons, or press the power button
. PASSPORT will display
Complete, beep 4 times, and return to normal
operation.
Settings & Preferences
Press the BRT button to go from
one category to the next
(Power-on indication)
Signal Strength Meter
Press and hold the MRK and BRT buttons to access Preferences. To exit Preferences, simply wait a few seconds without pressing a button. The unit will display confirm your selections.
*Default Setting
Completed to
Pilot Light
SpeedAlert
AutoLearn
AutoMute
AutoPower
Units
Voice
Bands
Press MRK to modify band preferences and go from one category to the next
Markers
Press the + or – button to change your setting within a category
Pilot HWY Pilot H Pilot H.> Pilot V Pilot SPD
sAlrt ON sAlrt OFF
aLrn ON aLrn OFF
Meter STD Meter EXP Meter SPC
aMute ON aMute OFF
aPwr ON aPwr OFF
Units ENG Units MET
Voice ON Voice OFF
Bands DFT Bands MOD
* Full word: Highway or Auto or City
Letter: H or A or C Letter, with scanning dot Vehicle voltage Vehicle speed
* Displays current speed during alert
SpeedAlert feature o
* Automatically locks out false alarms
AutoLearn is o
* Standard signal strength meter
ExpertMeter mode SpecDisplay mode
* Audio alerts increase automatically
Audio alerts are controlled manually
* Turns detector o after 4 hours
AutoPower feature is o
* Speed/distance in English units
Speed/distance in Metric units
* Voice announcements on
Voice announcements o
* Default settings
Bands have been modied
Press + or – to change your setting within a catagory
X ON or OFF (default is on)
K ON or OFF (default is on)
Ka ON or OFF (default is on) POP ON or OFF (default is o ) LSR ON or OFF (default is on) TSR ON or OFF (default is on)
Marks DFT Marks MOD
rCam ON or OFF (default is on) sCam ON or OFF (default is on)
sTrap ON or OFF (default is on)
Othr ON or OFF (default is on)
76
Notes for Settings & Preferences
For descriptions of features and functions available when connected to SmartCord Live with ESCORT Live visit EscortRadar.com and download the SmartCord Live user manual for your iOS or Android OS smartphone.
To view serial number and software revision press MRK and MUTE while powering on detector.
Restoring the Factory Default Settings:
To restore your PASSPORT to its original factory
settings, press and hold the “SEN” and “BRT” buttons while turning the power on. A
Reset
message will be displayed, accompanied by an audible alert acknowledging the reset.
Software Updates
PASSPORT’s red light and speed camera database is easily updated using our exclusive detector software tools found on our web site. Firmware, or the operating software for the detector, can also be updated using these tools.
In order to have access to these updates, you must register your PASSPORT at www.EscortRadar.com. Once registered, you will receive email notifications that updates are now available for your database or firmware.
To install your software and DEFENDER updates,
connect your PASSPORT to a computer via USB/ USB Mini B cable to use the software tools.
Contact Us
Registration
Register now to enter your new PASSPORT for our product warranty and qualify for special oers at EscortRadar.com
Info & Accessories
800.433.3487
EscortRadar.com
ESCORT Inc. 5440 West Chester Road West Chester OH 45069
Sales/Service 800.433.3487 www.EscortRadar.com
©2017 ESCORT Inc. ESCOR T®, PASSPORT®, TrueLock™, Speed Alert™, AutoLearn™, AutoSensitivity™, SmartMute™, MuteDisplay™, SpecDisplay™, and Exp ertMe ter™ are trademark s of ESCORT Inc.
FCC NOTE: Modications not exp ressly approved by th e manufacturer could void the user’s FCC gr anted authority to operate the equip ment.
FCC ID: QKL9XM 4 This device complies with par t 15 of the FCC rules. Operati on is subje ct to the following two conditions: (1) This device may n ot cause ha rmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
8
GPS Powered for Speed and Location Intelligence
Pre-loaded DEFENDER Database
Open
RADAR•LASER•SAFETY CAMERA•DETECTOR
Quick Reference
1220057-1_S75G_QRG.indd 1-4 5/24/17 11:44 AM
Congratulations
PASSPORT S75G Features Installation
®
Controls & Features
You’ve just purchased the PASSPORT S75G which combines award-winning radar and laser detection
with breakthrough intelligence.
The PASSPORT S75G delivers extreme long-range
warning on all radar bands including X, K,
Superwide Ka, and instant-on POP modes. Multiple
front and rear laser sensors provide 360 degree laser protection, including the widest field of view.
For the ultimate in laser protection, the PASSPORT
S75G can also be used in conjunction with our
Laser Shifter product. Visit our website at EscortRadar.com or call us toll-free at 800-433-3487 for more details.
The PASSPORT S75G’s GPS-powered intelligence
provides permanent relief from false alarms including automatic door openers, motion sensors and other radar-based sensors.
And, it comes pre-loaded with
ESCORT’s DEFENDER Database to alert you to thousands of red light and fixed position speed camera locations throughout North America.
If this is your first detector, please read this Quick Reference Guide in detail to get the most out of your PASSPORT’s revolutionary performance and innovative features.
Please drive safely.
AutoLearn automatically learns and rejects false radar sources based on exact location and frequency.
AutoPower automatically shuts off the detector to save unnecessary drain on your battery.
Web-ready access allows you to update your safety camera data and other software through our website.
Revolutionary AutoSensitivity mode provides real-time radar performance based on vehicle speed, plus Highway and Auto No X settings.
SpeedAlert provides an instant view of your vehicle’s speed during an alert.
Mark Location feature allows you to instantly
“Mark” known speed traps, cameras and other
places of interest.
Easy-to-use Preferences allow you to customize up to 10 features.
Ultra-bright alphanumeric display with 280 LEDs.
Exclusive ExpertMeter tracks and displays up to 8
radar signals simultaneously.
Exclusive SpecDisplay provides actual numeric frequency for any radar signal.
Selectable radar and laser bands (on/of f) allow you to customize which bands are monitored.
Selectable Markers (on/off) allow you to customize which Markers PASSPORT monitors.
Exclusive SmartCord provides easy access to Mute and TrueLock features.
Compatible with
* Requires Optional SmartCord Live and app subscription available at EscortRadar.com
Windshield Mount
PASSPORT’s EasyMount windshield bracket is designed for unobtrusive and hassle-free mounting.
Mounting Location
WARNING : ESCORT cannot anticipate the many ways PASSPORT can be mounted. It is impor tant that you mount PASSPORT where it will not impair you r view nor present a hazard in case of an accident.
Using the supplied windshield mount, position your PASSPORT level and high enough on your front windshield to provide a clear view of the road ahead. To ensure that the suction cups adhere to the windshield firmly and be sure to keep both your windshield and the suction cups clean. For optimum detection performance, we recommend the following on where to mount PASSPORT:
Center of windshield between driver and passenger.
Ensure clear view of road ahead and sky above.
Avoid windshield wipers and heavily tinted
areas.
For optimum rear detection, center the detector between the driver and passenger.
Mount PASSPORT away from windshield wipers, other solid objects, and heavily tinted areas that might obstruct the radar antenna or laser lens.
NOTE: In order for PASSPORT’s GPS-powered features to work properly, the top case must have a clear view of the sky.
1 Depress the release button on the top of
PASSPORT (by the word PASSPORT) and slide the EasyMount bracket into the slot until it is
locked into the position which best fits the angle of your windshield (there are four settings available). For extremely horizontal or extremely sloped windshields, the EasyMount
bracket can be bent. However, we suggest that
you do not do this when the bracket is connected to the detector.
2 To adjust PASSPORT on your windshield, use the
EasyMount release button located on the top of
the PASSPORT, and slide PASSPORT forward or
backward to obtain a level position.
Level mounting
When installed and adjusted properly, the back top edge of PASSPORT should rest solidly against your windshield.
Facin g Down Facing Up
User’s Tip
You can leave the EasyMount bracket in place on your windshield, and easily remove PASSPORT by pressing the release button and sliding PASSPORT off the mount. Again, be sure to position the bracket where it won’t present a hazard in the event of an accident. Additional mounts are available at EscortRadar.com.
Power Connection
To power PASSPORT, plug the small end of the SmartCord, (telephone-type connector) into the modular jack on PASSPORT’s left side, and plug the lighter plug adapter into your vehicle’s lighter socket or accessor y socket.
Press the power button located on the top case and adjust the volume level by pressing the “VOL”
+ or buttons located on the top case.
PASSPORT operates on 12 volts DC negative ground only. The lighter plug provided is a standard size and will work in most vehicles.
However, some vehicles may require our optional sleeve to ensure a snug fit. If so, simply call or visit EscortRadar.com.
You can easily access and customize all of your Settings and Preferences by pressing and holding the MRK and SEN buttons. See Settings & Preferences for details.
NOTE: depending on your vehicle, the lighter socket power may either be continuously on, or it may be switched on and off with your ignition switch.
Optional Power Cords
Call or visit EscortRadar.com for our optional Direct­wire SmartCord.
Using SmartCord
Mute Button: Press to mute an alert; press three times to lock out a false alert; press twice while receiving a locked-out alert to unlock.
Alert Light: Blinks when receiving an alert.
Power Light: Lights when receiving power.
Modular Connector
Plugs into detector jack
Lighter Adapter
Connects to lighter/accessory socket
EasyMount Slot
Inser t PASSPOR T’s
adjustable windshield
bracket into this slot
EasyMount Button
Press the button, and
slide the windshield bracket into one of its four locking positions
Rear Laser Port
Receives laser signals from
behind the vehicle
Earphone Jack
Accepts standard 3.5mm
mono earphone
Power Jack
Plug the SmartCord into this
connector
TrueLock/GPS Filter
Switches TrueLock feature
(stored locations) on or off
Sensitivity Button
Switches between
Highway, Auto, and
Auto NoX settings.
In general, we recommend
the Auto mode
Volume Adjustment
Increases or decreases the
alert volume
Radar Antenna and Laser Lens
For best performance the rear panel of your PASSPORT should have a clear, unobstructed view of the road ahead
Alphanumeric Display
PASSPORT’s display will show Highway, Auto, or Auto Nox as its power-on indication. If you prefer, you can choose other power-on indications
During an alert, the display will indicate radar band and a precise bar-graph of signal strength
NOTE: In the Dark Mode the display will not light during an alert
5432
USB Data Port
Allows updating DEFENDER
Database (red light and fixed position speed cameras) and other software from
EscortRadar.com
Power Button
Press this button to turn
PASSPORT on or off
Mark Location
Press to mark a specific
location (e.g. speed trap, etc.)
Brightness Button
Press to adjust the display
brightness. There are four
brightness settings: Min, Med, Max, Auto, plus Full Dark
In the Dark Mode, PASSPORT’s display will remain dark and only the audio will alert you
GPS Signal Indicator
The GPS icon indicates reception of GPS satellite signals and confirms TrueLock signal rejection
Mute Button
Briefly press button to silence the audio for a specific alert. (The audio will alert you
to the next encounter.)
Continued
1220057-1_S75G_QRG.indd 5-8 5/24/17 11:44 AM
Loading...