Escalade Sports G05620 User Manual

We strive to ensure that our products are of the highest quality

and free of manufacturing defects or missing parts. However, if

you have any problems with your new product,

DO NOT RETURN IT TO THE STORE,

please contact us toll free @:

1-866-556-2759

FAX: 1-866-873-3531

foosball@escaladesports.com

Or write to:

Escalade Sports

Customer Service Department

P.O. Box 889

Evansville IN 47706

Please have your model number when inquiring about parts.

When contacting Escalade S port s please provide your model number, serial number (if applicable), and part number if requesting a replacement part. These numbers are located on the product, packaging, and in this owners manual.

Y our Model Number _______________________

G05620

For Customer Service Call 1-866-556-2759

IMPORTANT! READ THIS MANUAL ALL THE WAY THROUGH BEFORE BEGINNING TO PUT YOUR GAME TABLE TOGETHER! THEN READ EACH STEP BEFORE STARTING THAT STEP.

TWO ADULTS ARE REQUIRED TO ASSEMBLE

THIS GAME TABLE

Tools Required:

Small Allen Wrench Included with the table Large Allen Wrench Included with the table Phillips Screwdriver Furniture Polish and Cloth

An electric screwdriver is helpful in assembly. However, please set at low torque and use extreme caution with an electric screwdriver because you could overtighten the hardware and strip the screws.

Assembly Tips

Make sure you understand the following tips before you begin to assemble your Multi Game Table.

1. When installing parts that have more than one bolt, start ALL the bolts in that part by hand before tightening anything.

2. Some drawings or images in this manual may not look exactly like your product. Please read and understand the text before starting each assembly step.

READ AND FOLLOW ALL ASSEMBLY , OPERA TION, AND

SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO

ADULTS ARE NEEDED TO PUT THIS GAME TABLE

TOGETHER.

For Customer Service Call 1-866-556-2759

1. Find a clean, level place to begin the assembly of your game table. We recommend building the table on the box top to protect the parts during assembly.

2. Place the main cabinet P1 UPSIDE DOWN as shown in FIGURE 1.

3. Using the Allen wrenchs provided, attach the legs P2 and P3 using bolts H3 and washers H4 as shown in FIGURE 1. Remember to start all hardware by hand before you tighten anything.

4. Attach the leg panel P13 between each set of legs using bolts H1 and washers H2 as as shown in FIGURE 1.

Figure 1

5. Tighten all hardware at this time.

CAUTION:

Start all hardware by hand before you tighten anything.

For Customer Service Call 1-866-556-2759

THIS STEP REQUIRES TWO OR MORE ADULTS.

VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON

ITS LEGS. BE CAREFUL, THE TABLE IS VERY HEAVY.

6. After you have turned the main cabinet over, set it aside and complete the following steps for the soccer table assembly.

For Customer Service Call 1-866-556-2759

7. Find a clean, level place to begin the assembly of your soccer table. We recommend building the table on the box top to protect the parts during assembly.

8. Place one side panel P4 UPSIDE DOWN with the finished side facing out as shown in FIGURE 2. The ball entry hole will be closest to the floor.

9. Align the rods as shown in FIGURE 2. Please note the location of the hole that is near one end of each rod. This is the handle end of the rod. There will be four handles on each side of the table. It is critical that you set the rods as shown below so the table will be correct when flipped over.

Figure 2

CAUTION:

Set the rods as shown noting the location of the hole / handle end.

For Customer Service Call 1-866-556-2759

+ 25 hidden pages

Escalade Sports G05620 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual